ECHO ECS300T/S 10 انچ (25 سينٽي ميٽر) اسپرڪوٽ نوز بار چينسا استعمال ڪندڙ دستياب

1. تعارف

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your ECHO ECS300T/S 10-inch (25cm) Sprocket Nose Bar Chainsaw. Please read this manual thoroughly before using the chainsaw and keep it for future reference. Adherence to these instructions will ensure optimal performance and user safety.

2. حفاظتي هدايتون

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always prioritize safety to prevent serious injury or death.

• ذاتي حفاظتي سامان (PPE): Always wear a safety helmet, eye protection, hearing protection, heavy-duty gloves, chainsaw protective trousers or chaps, and safety boots.
• ڪم جو علائقو: Ensure the work area is clear of bystanders, children, and pets. Maintain a safe distance from other people and objects.
• آپريشن کان اڳ چيڪ: Before each use, inspect the chainsaw for loose parts, damage, or wear. Ensure the chain brake is functional and the chain is properly tensioned and sharp.
• Fuel Handling (for gasoline models): Handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling. Wipe up any spills immediately.
• واپسي جي روڪٿام: Be aware of the risk of kickback. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• Stable Footing: Always maintain secure footing and balance. Do not overreach.
• موسم جون حالتون: Do not operate the chainsaw in adverse weather conditions such as heavy rain, strong winds, or icy conditions.
• ٿڪاوٽ: Do not operate the chainsaw when tired or under the influence of alcohol or medication.

3. پراڊڪٽ ختمview

The ECHO ECS300T/S is a compact and powerful chainsaw designed for various cutting tasks. Familiarize yourself with its components for safe and effective use.

هڪ اوور هيڊ view of the ECHO ECS300T/S chainsaw, featuring a grey and black body with a 10-inch sprocket nose bar and chain. The ECHO logo is visible on the bar and engine casing.

اهم اجزاء:

• گائيڊ بار: The metal bar that supports and guides the saw chain. This model features a 10-inch (25cm) sprocket nose bar.
• صندل جو سلسلو: The cutting chain that rotates around the guide bar. This model uses a 91PX specification chain.
• انجن هائوسنگ: Contains the engine, fuel tank, and oil tank.
• اڳيون هٿ: For gripping the chainsaw with your left hand.
• پوئتي هٿ: For gripping the chainsaw with your right hand, incorporating the throttle trigger and safety lock-out.
• زنجير بريڪ: A safety device designed to stop the chain instantly in case of kickback.
• Starter Handle: دستي طور تي انجڻ شروع ڪرڻ لاء استعمال ڪيو ويو.
• ٻارڻ ڪيپ: For the gasoline tank.
• Oil Cap: For the chain lubricant oil tank.

4. سيٽ اپ

4.1 کولڻ

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in the packing list are present.

4.2 Fuel and Oil Mixture

This chainsaw operates on a mixture of gasoline and 2-stroke engine oil. Use high-quality unleaded gasoline and a premium 2-stroke engine oil specifically designed for air-cooled engines. Refer to the engine oil manufacturer's instructions for the correct mixing ratio, typically 50:1 (50 parts gasoline to 1 part oil) or 25:1. Mix fuel in a separate, approved fuel container. Always add oil to gasoline, not the other way around, and shake well before filling the fuel tank.

• Fill the fuel tank with the prepared fuel mixture.
• Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil or motor oil.

4.3 بار ۽ زنجير جي انسٽاليشن

1. پڪ ڪريو ته انجن بند آهي ۽ زنجير بريڪ لڳل آهي.
2. Remove the chain cover nuts and the chain cover.
3. Place the guide bar onto the studs, ensuring the chain tension pin engages with the hole in the guide bar.
4. Carefully fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing forward on the top of the guide bar.
5. Replace the chain cover and loosely tighten the nuts.

4.4 Chain Tension Adjustment

Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled around by hand with light effort. There should be no sag on the underside of the guide bar.

1. With the chain cover nuts slightly loose, use the tensioning screw (usually located on the side of the chainsaw) to adjust the chain tension.
2. Lift the tip of the guide bar slightly while tightening the chain cover nuts firmly.
3. Check the tension again. The chain should not bind and should move freely.

5. آپريشن

5.1 انجڻ شروع ڪرڻ

Always start the chainsaw on a firm, flat surface, ensuring the chain brake is engaged.

ٿڌي شروعات

1. زنجير جي برڪ کي مشغول ڪريو.
2. Set the choke lever to the FULL CHOKE position.
3. پرائمر بلب کي ڪيترائي ڀيرا دٻايو جيستائين ايندھن واپسي واري لائن ۾ نظر نه اچي.
4. Pull the starter handle firmly and smoothly until the engine fires (usually a few pulls).
5. Once the engine fires, immediately push the choke lever to the HALF CHOKE or RUN position.
6. Pull the starter handle again until the engine starts and runs.
7. Allow the engine to warm up for a few moments, then disengage the chain brake and gently blip the throttle to return to idle.

گرم شروع:

1. زنجير جي برڪ کي مشغول ڪريو.
2. Set the choke lever to the RUN position.
3. اسٽارٽر هينڊل کي ڇڪيو جيستائين انجڻ شروع ٿئي.

5.2 ڪٽڻ جون ٽيڪنڪون

Always use both hands to operate the chainsaw. Maintain a firm grip and stable footing.

• گرڻ: For felling small trees, plan your escape route and ensure no one is in the fall zone. Make a directional notch first, then a felling cut from the opposite side.
• ٽنگڻ: Remove branches from a felled tree. Work from the base towards the top, supporting the branch if it's under tension.
• بڪنگ: Cutting a felled tree into sections. Be aware of pinching and rolling logs. Use a sawhorse or support logs to keep the chain off the ground.

5.3 انجڻ کي روڪڻ

To stop the engine, simply press the engine stop switch to the OFF position. Engage the chain brake immediately after stopping.

6. سار سنڀال

Regular maintenance is essential for the longevity and safe operation of your chainsaw.

6.1 روزاني چيڪ

• Check chain tension and sharpness.
• Inspect the guide bar for wear or damage.
• Verify chain brake functionality.
• Check fuel and chain oil levels.
• ايئر فلٽر کي صاف ڪريو.

6.2 زنجير تيز ڪرڻ

A sharp chain is critical for efficient cutting and safety. Sharpen the chain regularly using a round file of the correct diameter (refer to chain specifications, typically 4.0mm for 91PX chain) and a flat file for depth gauges. Maintain consistent angles and file all cutters evenly.

6.3 Guide Bar Maintenance

• Clean the guide bar groove to remove sawdust and debris.
• برابر پائڻ کي يقيني بڻائڻ لاءِ گائيڊ بار کي وقت بوقت الٽايو.
• Check the sprocket nose for smooth rotation and lubrication.

6.4 ايئر فلٽر جي صفائي

Remove the air filter and clean it with warm, soapy water. Rinse thoroughly and allow it to dry completely before reinstallation. Replace if damaged or excessively dirty.

6.5 اسپارڪ پلگ جي سار سنڀال

Inspect the spark plug periodically. Clean any carbon deposits and adjust the electrode gap if necessary. Replace the spark plug annually or if it shows signs of wear.

6.6 اسٽوريج

Before long-term storage, drain the fuel tank or run the engine until it runs out of fuel. Clean the chainsaw thoroughly. Store in a dry, secure location away from children and ignition sources.

7. مسئلا حل ڪرڻ

هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي پنهنجي زنجير جي آري سان منهن ڏيڻو پئجي سگهي ٿو.

8. وضاحتون

• برانڊ: ايڪو
• ماڊل: ECS300T/S
• پيداوار جي ماپ: 25.7 سينٽي (ڊگھائي) x 21.4 سينٽي (چوڪر) x 21 سينٽي (اوچائي)
• پيداوار جو وزن: 3 ڪلوگرام
• زنجير جي ڊگھائي: 25 سينٽي (10 انچ)
• Guide Bar Type: Sprocket Nose Bar
• Chain Specification: 91PX
• طاقت جو ذريعو: Gasoline Engine (based on visual evidence and typical chainsaw design for 91PX chain)
• First Available Date on Amazon.co.jp: 2024/6/4

9. وارنٽي ۽ سپورٽ

Specific warranty details and direct support contact information are not available in the provided product data. For warranty claims, technical support, or service, please refer to the documentation included with your purchase or contact your authorized ECHO dealer or the retailer from whom you purchased the product.