اهم حفاظتي ڄاڻ
Please read all instructions carefully before using this electric fireplace heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Retain this manual for future reference.
- پاور آئوٽليٽ وول کي يقيني بڻايوtage matches the rating of the heater.
- Do not operate the heater with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
- غسل خانن، ڪپڙن ڌوئڻ وارن علائقن، يا ساڳين اندروني جڳهن ۾ هيٽر استعمال نه ڪريو جتي اهو پاڻي سان رابطي ۾ اچي سگهي ٿو.
- جڏهن استعمال ۾ نه هجي ته هميشه هيٽر کي انپلگ ڪريو.
- Do not insert or allow foreign objects into any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- هي ڊوائيس اي سان ليس آهي CSA سرٽيفڪيشن, ensuring it meets safety standards.
- The heater includes overheat تحفظ, which automatically shuts off the unit if it reaches an unsafe temperature.
- It also features ٽپ کان وڌيڪ تحفظ, automatically shutting down if tilted more than 45 degrees.
پيڪيج مواد
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or operate the heater. Contact customer support for assistance.
- Silonn Electric Fireplace Heater Unit
- 4 x ٽنگون
- Screws for leg attachment
- Phillips Screwdriver (for assembly)
سيٽ اپ جون هدايتون
Follow these steps to set up your electric fireplace heater.
- يونٽ کوليو: Carefully remove the electric fireplace heater and all components from the packaging. Retain packaging for future storage or shipping.
- پيرن کي ڳنڍيو: Place the main heater unit upside down on a soft, non-abrasive surface to prevent scratching. Align each of the four legs with the designated mounting points on the bottom of the heater. Secure each leg using the provided screws and Phillips screwdriver. Ensure all screws are tightened securely.
- هيٽر کي پوزيشن ڪريو: Once the legs are attached, carefully turn the heater upright and place it on a firm, level surface. Ensure there is adequate clearance from walls, furniture, and other combustible materials (at least 3 feet). Do not block the air intake or exhaust vents.
- پاور سان ڳنڍيو: Plug the power cord into a grounded 120V AC outlet. Ensure the outlet is in good condition and not overloaded with other appliances.
آپريٽنگ هدايتون
Your Silonn Electric Fireplace Heater offers both heating and a realistic flame effect. The control panel is located on the side of the unit.
ڪنٽرول پينل ختمview
- گرمي پد ڪنٽرول Knob: A rotary knob used to adjust the desired room temperature from 62°F to 82°F. The heater will cycle on and off to maintain the set temperature.
- پاور سوئچ: Controls the main power to the unit, including the flame effect.
- Heat Switch: Activates or deactivates the heating function. This allows you to enjoy the flame effect without heat.
بنيادي آپريشن
- هلايو: Flip the Power Switch to the 'ON' position. The realistic 3D flame effect will illuminate.
- گرمي چالو ڪريو: To enable heating, flip the Heat Switch to the 'ON' position.
- درجه حرارت مقرر ڪريو: Rotate the Temperature Control Knob to your desired temperature setting between 62°F and 82°F. The heater will begin to emit warm air.
- Adjust Flame Only: If you wish to enjoy only the flame effect without heat, ensure the Power Switch is 'ON' and the Heat Switch is 'OFF'.
- بند ڪريو: To turn off the heater, first flip the Heat Switch to 'OFF' (if heating was active), then flip the Power Switch to 'OFF'. For extended periods of non-use, unplug the unit from the wall outlet.
سار سنڀال
باقاعده سار سنڀال توهان جي برقي چمني جي هيٽر جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.
- صفائي: هميشه هيٽر کي پاور آئوٽليٽ مان ڪڍو ۽ صاف ڪرڻ کان اڳ ان کي مڪمل طور تي ٿڌو ٿيڻ ڏيو. نرم، ڊي استعمال ڪريوamp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, sprays, or harsh chemicals. Ensure no water enters the interior of the heater.
- مٽي هٽائڻ: Periodically use a vacuum cleaner with a brush attachment to clean the air intake and exhaust vents to prevent dust buildup, which can affect heating efficiency.
- اسٽوريج: جڏهن گهڻي عرصي تائين استعمال ۾ نه هجي، ته هيٽر کي ٿڌي، سڪل جاءِ تي رکو، ترجيحي طور تي ان جي اصل پيڪنگنگ ۾، سڌي سج جي روشني ۽ نمي کان پري.
مشڪلاتون
If you encounter issues with your Silonn Electric Fireplace Heater, refer to the following common problems and solutions.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| هيٽر آن نٿو ٿئي. | No power to the unit; Power switch is off; Overheat protection activated; Tip-over protection activated. | Check if the unit is plugged in securely. Ensure the wall outlet is functional. Flip the Power Switch to 'ON'. If the unit was recently overheated or tipped, unplug it, wait 10-15 minutes for it to reset, and then plug it back in. |
| ڪابه گرمي نه، پر شعلا اثر ڪم ڪري ٿو. | Heat switch is off; Temperature setting is too low. | Flip the Heat Switch to 'ON'. Increase the Temperature Control Knob setting to a higher temperature. |
| هيٽر ڪافي گرمي پيدا نٿو ڪري. | Room size is too large for the heater's capacity; Air vents are blocked. | Ensure the heater is appropriate for the room size. Clear any obstructions from the air intake and exhaust vents. |
| غير معمولي شور يا بوءِ. | Dust buildup; Internal component issue. | Unplug the unit and clean the vents. If the issue persists, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact Silonn customer support for further assistance.
وضاحتون
| برانڊ | سلون |
| ماڊل نالو | SLELF01B-18 |
| پيداوار جا طول و عرض (ڊي x ڊبليو x ايڇ) | 14.8" x 8.98" x 18.03" |
| واتtage | 1400W |
| مواد | Cold Rolled Plate |
| شيءِ جو وزن | 13.88 پائونڊ |
| يو پي سي | 810158822979 |
| حفاظت جي سرٽيفڪيشن | CSA تصديق ٿيل |
| شور جي سطح | 37 ڊي بي کان هيٺ |
وارنٽي ۽ سپورٽ
For warranty information, please refer to the documentation included with your purchase or contact Silonn customer support directly. Details regarding product registration, warranty claims, and technical assistance can typically be found on the manufacturer's official webسائيٽ تي يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪندي.
For further assistance or inquiries, please visit the official Silonn webسائيٽ يا انهن جي گراهڪ سپورٽ ٽيم سان رابطو ڪريو.
