ONNAIS Large Biometric Gun Safe Instruction Manual

تعارف

This manual provides detailed instructions for the safe and effective use of your ONNAIS Large Biometric Gun Safe, Model KKNGS009. This safe is designed to secure firearms and valuables using advanced biometric fingerprint technology, a programmable keypad, and traditional key access. It features an internal light for visibility and an emergency power supply for reliable operation.

Image: ONNAIS Large Biometric Gun Safe with interior storage.

پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

• ONNAIS Large Biometric Gun Safe
• سيڪيورٽي ڪيبل
• مشيني چاٻيون (2)
• استعمال ڪندڙ دستي
• چڙهڻ اسڪرو (4)
• USB-C Emergency Power Cable

Image: All components included in the ONNAIS safe package.

سيٽ اپ ڪريو

1. بيٽري لڳائڻ

1. Locate the battery compartment on the front panel of the safe.
2. ڪمري جو ڍڪ کوليو.
3. Insert 4 AA batteries (not included) according to the polarity indicators.
4. بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.

2. Initial Unlock

Upon first use, the safe must be opened using the mechanical key.

1. Insert one of the provided mechanical keys into the keyhole on the front panel.
2. سيف کي کولڻ لاءِ چاٻي کي گھڙيال جي طرف ڦيرايو.
3. Lift the lid to open the safe.

Image: Manual key access for initial safe opening.

3. Setting a Passcode

The safe must be open to set or change the passcode.

1. Locate the 'SET' button inside the safe, usually near the battery compartment.
2. Press the 'SET' button once. The keypad will illuminate.
3. Enter a 6-digit passcode using the number buttons (1-5).
4. Press the 'OK' button to confirm.
5. Re-enter the same 6-digit passcode.
6. Press the 'OK' button again to finalize. A confirmation sound or light will indicate success.

Image: Keypad for setting and entering passcodes.

4. آڱرين جي نشانن جي رجسٽريشن

The safe must be open to register new fingerprints.

1. Locate the 'SET' button inside the safe.
2. Press the 'SET' button twice. The fingerprint scanner will illuminate.
3. Place your finger firmly on the fingerprint scanner. Lift and repeat 5 times, slightly adjusting the finger position each time to capture different angles.
4. A confirmation sound or light will indicate successful registration.

Image: Fingerprint scanner for biometric access.

آپريٽنگ هدايتون

1. فنگر پرنٽ سان کولڻ

1. Place a registered finger firmly on the fingerprint scanner.
2. The safe will unlock with a confirmation sound and the lid will open automatically.

2. Opening with Passcode

1. Enter your 6-digit passcode using the number buttons.
2. Press the 'OK' button. The safe will unlock with a confirmation sound and the lid will open automatically.

3. Opening with Mechanical Key

This method is used for initial setup or in case of battery failure.

1. Insert the mechanical key into the keyhole.
2. سيف کي کولڻ لاءِ چاٻي کي گھڙيال جي طرف ڦيرايو.
3. کولڻ لاءِ لڪ لٿو.

4. ايمرجنسي پاور سپلاءِ

If the batteries are completely drained, the safe can be temporarily powered using a USB-C cable.

1. Connect a USB-C cable (provided) to the emergency power port on the front panel.
2. Connect the other end of the USB-C cable to a power source (e.g., power bank, USB wall adapter).
3. Once powered, use your registered fingerprint or passcode to open the safe.
4. Replace the internal AA batteries as soon as possible.

Image: Emergency USB-C power port for external power supply.

سيڪيورٽي خاصيتون

1. Security Cable

The included security cable allows you to tether the safe to a fixed object, preventing unauthorized removal.

1. Unscrew the end of the security cable.
2. Thread the cable around a secure, immovable object (e.g., bed frame, car seat anchor).
3. Screw the end of the cable back into the designated port on the safe.

Image: Security cable attached to the safe and a fixed object.

2. چڙهڻ جا اختيار

The safe can be permanently mounted to a surface using the provided screws.

1. Choose a suitable mounting location (e.g., inside a cabinet, to a wall).
2. Mark the drill points using the pre-drilled holes on the bottom of the safe as a template.
3. و pilotي مٿا intoري ۾ پائلٽ سوراخ ڪريو.
4. Secure the safe using the provided mounting screws.

Image: Mounting holes and screws for permanent installation.

سار سنڀال

• بيٽري مٽائڻ: Replace all 4 AA batteries when the low battery indicator illuminates (usually a red light on the display).
• صفائي: نرم، سڪل ڪپڙي سان ٻاهرين حصي کي صاف ڪريو. رگڙيندڙ صاف ڪندڙن يا محلولن کان پاسو ڪريو.
• نمي ڪنٽرول: Place a desiccant packet (e.g., silica gel) inside the safe to absorb moisture and protect contents.

مشڪلاتون

• Safe Not Opening with Fingerprint/Passcode: Check battery level. If low, replace batteries or use emergency power. Ensure correct finger placement or passcode entry.
• وساريل پاسورڊ: Use the mechanical key to open the safe, then reset the passcode following the setup instructions.
• آڱرين جي نشان جي سڃاڻپ نه ٿي: Re-register your fingerprint, ensuring proper placement and multiple scans. Ensure your finger is clean and dry.
• طاقت ناهي: Replace batteries. If still no power, use the emergency USB-C power supply.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information, technical support, or any questions regarding your ONNAIS Large Biometric Gun Safe, please refer to the contact information provided on the product packaging or the official ONNAIS webسائيٽ. وارنٽي جي دعوي لاء توهان جي خريداري جي رسيد رکو.