جي بي ايل ايسtagاي 2 200P پاورڊ سب ووفر هدايت نامو

1. تعارف

جي بي ايل ايسtage 2 200P is a 300W powered subwoofer designed to enhance the low-frequency performance of your home audio system. Engineered at JBL's Acoustic Engineering Center of Excellence in Northridge, California, this subwoofer is part of the Stage series, delivering deep and powerful bass. It features a front-firing 10-inch (250mm) Polycellulose low-frequency woofer and dual rear-firing tuned ports for optimal bass response. A comprehensive set of controls allows for seamless integration into various audio setups.

2. اهم خاصيتون

• 10-inch (250mm) Polycellulose Ribbed Cone Low-Frequency Woofer: Delivers robust and accurate bass.
• 150W RMS (300W متحرڪ) Ampزنده: مهيا ڪري ٿو ample power for dynamic low-frequency reproduction.
• Dual Rear-Firing Tuned Ports: Enhances bass output and extension.
• Crossover, Level, and Phase Control: Allows for precise adjustment and integration with main speakers.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون انباڪسنگ تي موجود آهن:

• جي بي ايل ايسtage 2 200P Powered Subwoofer
• پاور ڪنڊ
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. سيٽ اپ

4.1. رکڻ

توهان جي سب ووفر جي جاءِ ان جي ڪارڪردگي تي خاص طور تي اثر انداز ٿئي ٿي. پنهنجي ٻڌڻ واري علائقي ۾ بهترين باس جواب ڳولڻ لاءِ مختلف جڳهن سان تجربو ڪريو. عام طور تي، سب ووفر کي ڪنڊ ۾ رکڻ سان باس آئوٽ پُٽ وڌي سگهي ٿو، جڏهن ته ان کي ڀت سان گڏ رکڻ سان وڌيڪ متوازن آواز ملي سگهي ٿو. ان کي سڌو سنئون ڀت جي سامهون يا ڪابينا ۾ رکڻ کان پاسو ڪريو بغير مناسب وينٽيليشن جي.

شڪل 1: سامهون view جي بي ايل ايسtage 2 200P Subwoofer. This image shows the subwoofer's front grille, which can be removed to reveal the woofer cone.

شڪل 2: سامهون view جي بي ايل ايسtage 2 200P Subwoofer with the grille removed, highlighting the 10-inch Polycellulose ribbed cone woofer.

4.2. ڪنيڪشن

Connect the subwoofer to your audio receiver or amplifier using an LFE (Low-Frequency Effects) output or stereo RCA outputs. For optimal performance, use a dedicated subwoofer output from your receiver.

1. LFE ان پٽ: If your receiver has an LFE output, connect a single RCA cable from the receiver's LFE output to the subwoofer's LFE input.
2. Line-Level Inputs: If your receiver does not have an LFE output, connect RCA cables from the receiver's stereo pre-out (left and right) to the subwoofer's Line-Level inputs.

شڪل 3: پوئتي view جي بي ايل ايسtage 2 200P Subwoofer, displaying the control panel, input/output connections, and dual rear-firing tuned ports.

شڪل 4: تفصيلي view of the rear control panel, illustrating the Crossover, Volume, Phase, and Power Mode settings for system integration.

4.3. پاور ڪنيڪشن

Once audio connections are made, connect the supplied power cord to the subwoofer's power input and then to a suitable AC wall outlet. The subwoofer features a power mode switch (On/Auto/Normal/Reverse) for convenient operation.

5. آپريشن

5.1. ڪنٽرول مٿانview

The rear panel of the JBL Stage 2 200P subwoofer provides several controls for fine-tuning its performance:

• Volume (Level) Control: سب ووفر جي مجموعي آئوٽ پُٽ ليول کي ترتيب ڏئي ٿو. گهٽ سيٽنگ سان شروع ڪريو ۽ بتدريج وڌايو جيستائين باس توهان جي مکيه اسپيڪرن سان بيحد ملائي نه وڃي.
• ڪراس اوور ڪنٽرول: Sets the upper frequency limit for the subwoofer. Frequencies above this setting will be sent to your main speakers. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
• Phase Control (0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass.
• Power Mode Switch (On/Auto/Normal/Reverse):
  • تي: The subwoofer remains continuously on.
  • خودڪار: The subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
  • Normal/Reverse: These settings might refer to specific phase adjustments or power-saving modes. Refer to the detailed manual for specific model functionality.

5.2. Initial Adjustment

1. سيٽ ڪريو حجم control to its minimum position.
2. سيٽ ڪريو ڪراس اوور control to approximately 80 Hz, or as recommended by your main speaker manufacturer.
3. سيٽ ڪريو مرحلو switch to 0°.
4. سيٽ ڪريو پاور موڊ to "Auto" for convenience.
5. Play some audio with significant bass content.
6. تدريجي طور تي وڌايو حجم control until the bass output is balanced with your main speakers.
7. سان تجربو ڪريو مرحلو switch (0° vs. 180°) to determine which setting provides the most natural and impactful bass in your listening position.
8. Further fine-tune the ڪراس اوور ۽ حجم controls to achieve optimal integration and desired bass response.

6. سار سنڀال

• صفائي: Use a soft, dry cloth to clean the subwoofer cabinet. Avoid using abrasive cleaners, waxes, or solvents.
• وينٽيليشن: Ensure adequate ventilation around the subwoofer to prevent overheating. Do not block the rear ports or place the unit in an enclosed space without airflow.
• سنڀالڻ: When moving the subwoofer, lift it carefully from the base. Avoid dropping or subjecting it to strong impacts.

7. مسئلا حل ڪرڻ

8. وضاحتون

شڪل 5: پاسي view of the subwoofer illustrating its physical dimensions.

9. وارنٽي ۽ سپورٽ

جي بي ايل ايسtage 2 200P Powered Subwoofer comes with a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official JBL webسائيٽ. ٽيڪنيڪل سپورٽ، مسئلو حل ڪرڻ ۾ مدد، يا سروس جي پڇا ڳاڇا لاءِ، مھرباني ڪري JBL ڪسٽمر سپورٽ سان انھن جي سرڪاري چينلز ذريعي رابطو ڪريو.

وڌيڪ معلومات لاءِ توهان سرڪاري JBL اسٽور جو دورو ڪري سگهو ٿا: ايميزون تي جي بي ايل اسٽور