پاور بيس PBX-1200.5 مڪمل رينج ڊجيٽل Ampوierيڪ استعمال ڪندڙ دستياب

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your PowerBass PBX-1200.5 Full Range Digital Ampلائفائر. انسٽال ڪرڻ يا هلائڻ جي ڪوشش ڪرڻ کان اڳ مھرباني ڪري ھن دستور کي چڱي طرح پڙھو amplifier to ensure proper function and to prevent damage to the unit or your vehicle's audio system. Retain this manual for future reference.

2. حفاظت جي ڄاڻ

خبردار: Improper installation or use of this amplifier can result in serious injury or property damage. Always follow these safety guidelines:

• ڪو به بجلي جو ڪم شروع ڪرڻ کان اڳ گاڏي جي بيٽري نيگيٽو ٽرمينل کي ڊسڪنيڪٽ ڪريو.
• پڪ ڪريو ته سڀئي وائرنگ صحيح طريقي سان روٽ ٿيل ۽ محفوظ آهن ته جيئن پنچنگ يا نقصان کان بچي سگهجي.
• انسٽاليشن سيڪشن ۾ بيان ڪيل بجلي ۽ زميني ڪنيڪشن لاءِ مناسب گيج وائرنگ استعمال ڪريو.
• انسٽال ڪريو amplifier in a location that allows for adequate ventilation and is protected from moisture and excessive heat.
• ڪم نه ڪريو ampجيڪڏهن اهو خراب يا خراب ٿي ويو آهي ته لائفائر.
• جيڪڏهن توهان کي انسٽاليشن جي ڪنهن به مرحلي بابت پڪ ناهي ته پيشه ورانه مدد حاصل ڪريو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• PowerBass PBX-1200.5 Ampزندگي گذاريندڙ
• استعمال ڪندڙ جو دستياب (ھي دستاويز)
• ماؤنٽنگ هارڊويئر (اسڪرو، بريڪٽس، وغيره)
• Wired Secondary Remote Gain Control

4. پراڊڪٽ ختمview ۽ خاصيتون

The PowerBass PBX-1200.5 is a high-efficiency full-range Class D amplifier designed for robust audio performance in a vehicle environment. It features advanced circuitry and user-friendly controls for optimal sound customization.

شڪل 4.1: مٿي کان هيٺ view of the PowerBass PBX-1200.5 ampلائفائر، شوڪasinج اهو چمڪندڙ ڪارو ج آهيasing and central illuminated logo.

اهم خاصيتون:

• Powerful and Efficient Design: 1,200-watt high-efficiency full-range Class D design for substantial power output with minimal energy consumption.
• Versatile and Stable Operation: 2-ohm stable five-channel amplifier with a double-sided copper-plated PCB and PWM MOSFET power supply. High current voltage ripple rejection circuitry minimizes voltage fluctuations.
• Advanced Audio Customization: Digital sound optimization circuitry, high damping control circuit, and variable subsonic filter. Includes a 40-click variable detente high/low pass electronic crossover and 40-click variable detente bass boost at 45 Hz.
• استعمال ڪندڙ-دوست خاصيتون: Front load terminal design, balanced RCA inputs, selectable auto turn-on circuit, remote soft delay turn-on/off circuit, wired secondary remote gain control, and a calibrated visual clip indicator.
• جامع تحفظ: Robust protection circuit safeguards against impedance overload, speaker short circuits, thermal overheating, and DC output.

شڪل 4.2: بند ڪرڻ view of the RCA input jacks for channels 1 through 5 on the amplifier, labeled CH1, CH2, CH3, CH4, CH5.

شڪل 4.3: تفصيلي view of the control panel, showing adjustable gain, high-pass filter (HPF), and subsonic filter settings for precise audio tuning.

5. سيٽ اپ ۽ تنصيب

توهان جي ڪارڪردگي ۽ ڊگهي عمر لاءِ صحيح تنصيب اهم آهي amplifier. If you are not comfortable with the installation process, it is recommended to seek professional assistance.

5.1 چڙهڻ وارو هنڌ

• Choose a dry, well-ventilated area away from direct sunlight and heat sources.
• پڪ ڪريو ته چڙهڻ واري مٿاڇري ڪافي مضبوط آهي ته جيئن سپورٽ ڪري سگهجي ampلفٽ جو وزن.
• Allow at least 2 inches (5 cm) of clearance around the ampمناسب گرمي جي خاتمي لاء لفيئر.

5.2 وائرنگ ڪنيڪشن

ڪو به ڪنيڪشن ٺاهڻ کان اڳ، گاڏي جي منفي بيٽري ٽرمينل کي ڊسڪنيڪٽ ڪريو.

1. پاور (بي+): Connect a heavy-gauge power cable (e.g., 4 AWG or larger, depending on total system power) directly from the positive terminal of the vehicle's battery to the amplifier's B+ terminal. Install an appropriate fuse holder within 18 inches (45 cm) of the battery.
2. گرائونڊ (GND): Connect a heavy-gauge ground cable of the same size as the power cable from the amplifier's GND terminal to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid, low-resistance connection.
3. ريموٽ ٽرن آن (REM): Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output to the ampلائفائر جو REM ٽرمينل. هي تار سگنل ڏئي ٿو amplifier to turn on and off with the head unit.
4. آر سي اي انپٽس: پنهنجي هيڊ يونٽ جي پري کان آر سي اي ڪيبلز ڳنڍيو.amp outputs to the corresponding RCA input jacks on the amplifier (CH1, CH2, CH3, CH4, CH5).
5. اسپيڪر جا نتيجا: Connect speaker wires from the amplifier's speaker output terminals to your speakers. Ensure correct polarity (+ to + and - to -) for each speaker. Refer to your speaker's impedance rating and the amplifier's specifications to ensure compatibility (2-ohm stable operation).

6. آپريٽنگ هدايتون

هڪ دفعو جي amplifier is installed and all connections are secure, you can proceed with initial setup and adjustments.

6.1 شروعاتي پاور اپ

1. گاڏي جي منفي بيٽري ٽرمينل کي ٻيهر ڳنڍيو.
2. پنهنجو هيڊ يونٽ آن ڪريو. amplifier should power on, indicated by its illuminated logo or power indicator.
3. Start with all gain controls on the amplifier set to minimum (fully counter-clockwise).

6.2 ايڊجسٽمينٽ حاصل ڪريو

حاصل ڪنٽرول سان ملندو آهي amplifier's input sensitivity to the output of your head unit. It is NOT a volume control.

1. Play a familiar piece of music with a strong signal at a moderate volume level on your head unit (around 75% of maximum).
2. Slowly increase the gain control on the amplifier until you hear distortion, then back it off slightly until the sound is clear.
3. Utilize the calibrated visual clip indicator to assist in setting the gain without distortion.

6.3 Crossover Settings (HPF/LPF)

The PBX-1200.5 features variable high-pass (HPF) and low-pass (LPF) electronic crossovers to direct specific frequency ranges to your speakers.

• هاء-پاس فلٽر (HPF): Used for full-range or component speakers to block low frequencies that they cannot reproduce effectively. Adjust the HPF to a frequency above the speaker's resonant frequency (e.g., 80 Hz for most component speakers).
• گھٽ-پاس فلٽر (LPF): Used for subwoofers to block high frequencies. Adjust the LPF to a frequency that blends well with your main speakers (e.g., 80-120 Hz).

6.4 سبسونڪ فلٽر

The variable subsonic filter helps protect subwoofers by removing extremely low frequencies that are inaudible and can cause damage. Set it slightly below your LPF setting, typically between 20-30 Hz.

6.5 باس بوسٽ

The 40-click variable detente bass boost at 45 Hz allows for enhancing low-frequency output. Use sparingly to avoid distortion and speaker damage. Adjust to taste, ensuring the sound remains clean.

6.6 Wired Secondary Remote Gain Control

Connect the wired remote gain control to the amplifier to allow for convenient adjustment of the subwoofer channel's output level from the driver's seat.

7. سار سنڀال

The PowerBass PBX-1200.5 ampڊگهي مدت جي ڪارڪردگي کي يقيني بڻائڻ لاءِ لائفائر کي گهٽ ۾ گهٽ سار سنڀال جي ضرورت آهي.

• صفائي: وقتي طور تي صاف ڪريو ampلائفائر جي ٻاهرين حصي کي نرم، سڪل ڪپڙي سان صاف ڪريو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال نه ڪريو.
• وينٽيليشن: انهي کي يقيني بڻايو وڃي ته amplifier's cooling fins are free from dust and debris to maintain proper airflow.
• ڪنيڪشن: ڪڏهن ڪڏهن سڀني وائرنگ ڪنيڪشن کي تنگي ۽ زنگ لاءِ چيڪ ڪريو. ڍلا ڪنيڪشن خراب ڪارڪردگي يا نقصان جو سبب بڻجي سگهن ٿا.

8. مسئلا حل ڪرڻ

جيڪڏهن توهان پنهنجي سان مسئلا محسوس ڪندا آهيو ampلائفائر، سپورٽ سان رابطو ڪرڻ کان اڳ ھيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو.

9. وضاحتون

Technical specifications for the PowerBass PBX-1200.5 Full Range Digital Ampزنده:

10. وارنٽي ۽ سپورٽ

وارنٽي: The PowerBass PBX-1200.5 amplifier comes with a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

حمايت: For technical assistance, troubleshooting beyond this manual, or warranty service, please contact PowerBass customer support. Refer to the official PowerBass webموجوده رابطي جي معلومات لاءِ سائيٽ.

ٺاهيندڙ: پاور بيس