پاور ايم آر 3600W سولر انورٽر يوزر مينوئل

1. پراڊڪٽ ختمview

The PowMr 3600W Solar Inverter is a versatile off-grid solution designed to convert 24V DC power from batteries into 110V AC pure sine wave electricity. It integrates a 120A MPPT solar charge controller and an 80A AC charger, making it suitable for various solar power applications. This unit supports multiple battery types, including AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4, and can operate in a batteryless mode.

شڪل 1.1: سامهون view of the PowMr 3600W Solar Inverter, showcasing the LCD display and control buttons.

2. اهم خاصيتون

• هاء پاور آئوٽ: Rated 3.6kW pure sine wave output, converting 24V DC to 110V AC.
• Advanced MPPT Controller: Features a 120A MPPT solar charge controller with a maximum PV input power of 4200W and 500Vdc.
• لچڪدار چارج: Includes an 80A AC charger, supporting a max hybrid charging current (AC + PV) of 120A.
• بيٽري مطابقت: Compatible with AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4 batteries. Supports batteryless operation.
• استعمال ڪندڙ-دوستانه ڊسپلي: LED display provides real-time system information and allows adjustment of input voltage range, battery charging current, and AC/solar charging priority.
• جامع تحفظ: Equipped with dual cooling fans for efficient heat dissipation and multiple protections including short circuit, over/under voltage, overload, reverse polarity, and over-temperature.
• ڪميونيڪيشن انٽرفيس: Supports RS485 and RS232 communication.

Figure 2.1: Visual representation of the inverter highlighting key technical specifications such as 3.6kW/24V, 97% conversion efficiency, and 120A max solar charge current.

3. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the safe and efficient operation of your PowMr solar inverter. Please follow these steps carefully. It is recommended to have a qualified electrician perform the installation.

3.1 انورٽر کي چڙهڻ

1. Determine a suitable, well-ventilated installation location, away from direct sunlight, moisture, and flammable materials.
2. Secure the inverter to a sturdy wall using two screws through the mounting holes located at the top of the inverter. Ensure it is level and firmly attached.

Figure 3.1: The PowMr 3600W Solar Inverter securely mounted on a wall, ready for wiring connections.

3.2 بيٽري ڪنيڪشن

Before connecting the battery, ensure the inverter is turned off and all circuit breakers are open.

1. Connect the positive (+) and negative (-) cables from your 24V battery bank to a suitably rated DC circuit breaker.
2. Remove the port cover at the bottom of the inverter by unscrewing the four screws. This exposes the connection terminals.
3. Connect the positive (+) and negative (-) cables from the DC circuit breaker to the corresponding battery terminals on the inverter. Ensure correct polarity to prevent damage from reverse connection.
4. بيٽري جي مقدار جي تصديق ڪريوtage is within the acceptable range for the inverter (typically 24V nominal).

Figure 3.2: The inverter connected to a 24V battery, illustrating the battery terminals and the DC circuit breaker.

3.3 پي وي ايري ڪنيڪشن

Connect your solar panels (PV array) to the inverter. Ensure the PV array's voltage and current are within the inverter's specifications.

1. Connect the positive (+) and negative (-) cables from your PV array to the positive and negative PV input ports of the inverter.
2. سڀني ڪنيڪشنن کي سختي ۽ صحيح قطبيت لاءِ ٻه ڀيرا چيڪ ڪريو.

3.4 AC Input and Output Connections

The inverter can be connected to utility power or a generator for charging and backup.

1. Connect the utility power or generator to the AC input port of the inverter.
2. Connect your loads to the main AC output port.
3. If utilizing the dual output smart management feature, connect secondary loads to the secondary AC output port. This feature allows for stable power supply to the secondary output line.

3.5 پاور آن

1. After all connections are made and verified, replace the port cover on the inverter.
2. بيٽري سرڪٽ بريڪر بند ڪريو.
3. Power on the inverter using its main power switch.
4. If the inverter shows no abnormalities, sequentially activate the PV input, AC input, and AC output lines.

4. آپريٽنگ موڊس

The PowMr 3600W Solar Inverter offers flexible operating modes to suit various energy needs.

4.1 چارجنگ موڊس

The inverter supports three distinct charging modes:

• صرف شمسي: بيٽري چارج ڪرڻ لاءِ شمسي توانائي کي ترجيح ڏئي ٿو.
• صرف مکيه: Uses utility power (AC grid) for battery charging.
• Mains & Solar Hybrid: Combines both solar and utility power for efficient battery charging.

4.2 Load Output Modes

The inverter provides three load output working modes:

• يوٽيلٽي ترجيح: Prioritizes utility power to supply loads.
• شمسي ترجيح: Prioritizes solar power to supply loads.
• Solar and SBU Priority: Prioritizes solar power, then battery, then utility power for loads.

Figure 4.1: Flowchart depicting the various charging and load output priority modes available on the inverter.

5. Configurable Settings via LCD Display

The integrated LED display provides real-time system information and allows users to customize various operational parameters.

• انٽ واليمtagاي جي حد: Adjust the acceptable input voltage range for utility power.
• موجوده بيٽري چارج ڪرڻ: Set the desired battery charging current based on your battery type and capacity.
• AC and Solar Charging Priority: Configure the priority between AC and solar charging sources.

Figure 5.1: The LCD display interface, illustrating options for adjusting AC/Solar charger priority, battery charging current, and input voltage حد.

6. ايپليڪيشنون

The PowMr 3600W Solar Inverter is designed for a wide range of applications, providing reliable power in various settings.

• رهائشي استعمال: Powering homes and essential appliances.
• Commercial Photovoltaic Applications: Supporting small to medium commercial power needs.
• Agricultural Applications: Providing power for farm equipment and remote agricultural sites.
• ايمرجنسي بيڪ اپ: Ensuring power continuity during outages for critical systems.

شڪل 6.1: مثالamples of the inverter's applications, including residential, commercial, agricultural, and emergency backup scenarios.

7. ٽيڪنيڪل وضاحتون

8. حفاظت جي ڄاڻ

Always observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

• پڪ ڪريو ته سڀئي وائرنگ قابل عملدار طرفان ڪيا وڃن ۽ مقامي برقي ضابطن جي تعميل ڪن.
• Do not connect or disconnect wires while the system is live. Always disconnect power sources (PV, battery, AC input) before servicing.
• Avoid installing the inverter in areas with high humidity, dust, or flammable gases.
• inverter جي مناسب گرائونڊنگ کي يقيني بڻائي.
• Do not attempt to open or repair the inverter yourself. Refer to authorized service personnel.
• ٻارن کي انورٽر ۽ وائرنگ کان پري رکو.

Figure 8.1: The inverter's built-in protection mechanisms, including short circuit, over current, over voltage ، جلد هيtage, overload, backfill, over-temperature, and over charge protection.

9. سار سنڀال

باقاعده سار سنڀال توهان جي انورٽر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائڻ ۾ مدد ڪري ٿي.

• صفائي: Periodically clean the exterior of the inverter and ensure the cooling vents are free from dust and debris. Use a dry, soft cloth.
• ڪنيڪشن چيڪ: Regularly inspect all electrical connections (battery, PV, AC input/output) for tightness and signs of corrosion.
• ماحولياتي چڪاس: پڪ ڪريو ته انسٽاليشن جو ماحول مخصوص درجه حرارت ۽ نمي جي حدن اندر رهي.
• فرم ويئر اپڊيٽس: ٺاهيندڙ جي چيڪ ڪريو website for any available firmware updates to improve performance or address issues.

10. مسئلا حل ڪرڻ

This section provides guidance on common issues you might encounter. For complex problems, contact customer support.

11. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات، ٽيڪنيڪل سپورٽ، يا سروس جي پڇا ڳاڇا لاءِ، مھرباني ڪري سرڪاري پاور ايم آر جو حوالو ڏيو. website or contact their customer service directly. Keep your purchase receipt and product serial number handy for faster assistance.

ٺاهيندڙ: پو مسٽر

Webسائيٽ: PowMr Official Store on Amazon