1. تعارف
The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter is a specialized tool designed for efficient and precise cutting of various flooring and siding materials. This manual provides essential information for the safe and effective operation, setup, and maintenance of your cutter.
This tool is capable of cutting the following materials:
- انجنيئر ٿيل ڪاٺ جو فرش
- ليمينيٽ فلورنگ
- پارڪر
- ونائل فرش
- VCT ٽائل
- ونائل سائڊنگ
- سيمينٽ سائڊنگ
- رٻڙ
- فوم
- پي وي سي
Image 1.1: The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter. This image displays the complete cutter assembly, featuring the long handle, cutting mechanism, and base with a ruler.
2. حفاظتي هدايتون
Always prioritize safety when operating any cutting tool. Failure to follow these instructions may result in injury or damage to the tool.
- ھدايت پڙھو: Before operation, thoroughly read and understand all instructions in this manual.
- حفاظتي سامان پائڻ: هميشه مناسب ذاتي حفاظتي سامان پائڻ، جنهن ۾ حفاظتي چشما، دستانا، ۽ مضبوط پير شامل آهن.
- مستحڪم ڪم جي مٿاڇري: Ensure the cutter is placed on a stable, level, and non-slip surface before use.
- ڪم واري علائقي کي صاف رکو: Maintain a clean and well-lit work area. Cluttered areas invite accidents.
- هٿ صاف رکو: Never place hands or fingers near the blade during operation or when adjusting materials.
- محفوظ مواد: Ensure the material to be cut is properly positioned and stable on the cutter's base.
- بلڊ جي تيز رفتار: A dull blade can be more dangerous than a sharp one as it requires more force, increasing the risk of slippage. Keep the blade sharp and replace it when necessary.
- ٻار ۽ تماشائي: ٻارن ۽ ويهندڙن کي ڪم واري علائقي کان پري رکو.
- مناسب اسٽوريج: Store the cutter in a dry, secure location out of reach of children when not in use.
3. پيداوار جا حصا
Familiarize yourself with the key parts of your ROBERTS PrecisionCuts Pro Multi-Floor Cutter:
- وڌايل هٿ: Provides leverage for smooth and powerful cutting action.
- Steel-Encased Cams with Ball Bearings: Ensures smooth and efficient operation of the cutting mechanism.
- 4 mm Thick Tungsten Blade: Durable, resharpenable, and replaceable for long-lasting performance.
- Repositionable Guide Bar with Locking Screw: Allows for precise 90-degree straight cuts.
- Built-in Ruler: Features both inches and millimeters for accurate measurements.
- بلٽ ان لائيٽ: Illuminates the cutting line for enhanced precision (requires 9-volt battery, sold separately).
- Larger Opening: Integrated hand grip in the table for easier portability.
Image 3.1: Key components of the cutter. This diagram highlights the extended handle, steel-encased cams with ball bearings, 4mm thick tungsten blade, repositionable guide bar with locking screw, and the larger opening for carrying.
4. سيٽ اپ
Before beginning any cutting tasks, ensure your cutter is properly set up.
- پيڪنگ کولڻ: Carefully remove the cutter from its packaging. Inspect for any shipping damage.
- لڳائڻ: Place the cutter on a sturdy, level, and clean work surface. Ensure the surface can support the weight of the cutter and the material being cut.
- Guide Bar Adjustment: The guide bar can be moved to accommodate different material widths and ensure straight 90-degree cuts. Loosen the locking screw, slide the guide bar to the desired position, and securely tighten the locking screw. The built-in ruler aids in precise positioning.
Image 4.1: Guide bar and built-in ruler. This close-up shows the guide bar locked in place for perfect cuts and the integrated ruler with both inches and millimeters for accurate measurements.
- Install 9-Volt Battery (for Built-in Light): If you intend to use the built-in light for precise cutting, insert a 9-volt battery (sold separately) into the designated compartment. Refer to the battery compartment cover for correct polarity.
5. آپريٽنگ هدايتون
Follow these steps for safe and effective operation of your multi-floor cutter.
- مواد تيار ڪريو: Measure and mark your cutting line on the material. Ensure the material is clean and free of debris.
- پوزيشن مواد: Place the material firmly against the guide bar and align your marked cutting line with the cutter's blade. Ensure the material is flat on the cutting surface.
- Activate Built-in Light (Optional): If using, turn on the built-in light to illuminate the cutting line for enhanced visibility and precision.
Image 5.1: Built-in light for precise cutting. This image shows a hand pressing the red button to activate the light, which illuminates the cutting area for improved accuracy.
- ڪٽ ڪريو: With a firm grip on the extended handle, apply steady, downward pressure. Pull the handle down smoothly and consistently through the material. Avoid jerky movements.
- Clear Cut Material: Once the cut is complete, carefully remove the cut pieces from the work area.
- ورجائي: Reposition the guide bar and material as needed for subsequent cuts.
Image 5.2: User operating the cutter. This image shows a person kneeling and using the extended handle to cut a piece of flooring material, demonstrating proper technique.
6. سار سنڀال
Regular maintenance ensures the longevity and optimal performance of your cutter.
- بلڊ جي سنڀال: The 4 mm thick tungsten blade is resharpenable. If cuts become difficult or ragged, the blade may need sharpening or replacement. Consult a professional for blade sharpening or purchase a genuine ROBERTS replacement blade.
- صفائي: After each use, clean the cutter to remove dust, debris, and material residue. Use a dry cloth or brush. Avoid using harsh chemicals that could damage the tool's finish or components.
- لوڻ: Periodically apply a light machine oil to the moving parts, such as the cam mechanism and guide bar slides, to ensure smooth operation.
- اسٽوريج: Store the cutter in a dry, protected environment to prevent rust and damage.
7. مسئلا حل ڪرڻ
If you encounter issues with your cutter, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Cuts are not clean or straight. | Dull blade, improper material positioning, loose guide bar. | Sharpen or replace blade. Ensure material is firmly against guide bar. Tighten guide bar locking screw. |
| Difficulty in cutting material. | Dull blade, material too thick, insufficient downward pressure. | Sharpen or replace blade. Verify material thickness is within specifications (max 5/8" or 16mm). Apply firm, steady pressure. |
| Built-in light not working. | Dead or missing 9-volt battery. | Replace the 9-volt battery. Check battery polarity. |
| Cutter mechanism feels stiff. | Lack of lubrication, accumulated debris. | Clean moving parts and apply light machine oil. |
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 10-911 |
| برانڊ | رابرٽس |
| مواد | Metal, Tungsten (Blade) |
| وڌ ۾ وڌ ڪٽڻ جي ويڪر | 9 انچ (229 ملي ايم) |
| وڌ ۾ وڌ ڪٽڻ جي ٿلهي | 5/8 انچ (16 ملي ميٽر) |
| Diagonal Cut Capacity | 5.5 انچ |
| بليڊ جي ٿلهي | 4 ملي ميٽر |
| شيءِ جو وزن | 26 پائونڊ |
| روشني لاءِ طاقت جو ذريعو | 9-volt battery (sold separately) |
| يو پي سي | 075378100911 |
Image 8.1: Cutter dimensions. This image illustrates the approximate height (36.5" / 92.7 cm), width (9.25" / 23.5 cm), and length (25.5" / 64.7 cm) of the ROBERTS PrecisionCuts Pro Multi-Floor Cutter, along with its cutting capacities of up to 9" wide and 5/8" thick.
9. ڪسٽمر سپورٽ
For further assistance, technical support, or to inquire about replacement parts, please contact ROBERTS customer service. Refer to the product packaging or the official ROBERTS webجديد ترين رابطي جي معلومات لاءِ سائيٽ.
