BN-LINK 7-Day Outdoor Digital Programmable Timer

1. تعارف

This manual provides instructions for the safe and efficient operation of your BN-LINK 7-Day Outdoor Digital Programmable Timer. This device is designed to automate the control of electrical appliances, offering convenience and energy savings for both indoor and outdoor applications. Please read this manual thoroughly before use and retain it for future reference.

2. حفاظت جي ڄاڻ

• برقي حفاظت: Always ensure the timer is properly grounded. Do not immerse the timer in water.
• لوڊ گنجائش: Do not exceed the maximum load rating of 125V, 60 Hz, 15A/1875W Resistive, 10A/1250W Tungsten. Overloading can cause overheating and fire.
• ٻاهرين استعمال: When used outdoors, ensure the timer is mounted vertically at least 2 feet above the ground to prevent water accumulation and ensure proper drainage. Use with outdoor-rated appliances only.
• چڪاس: Regularly inspect the timer and its cord for any signs of damage. Do not use if damaged.
• ٻار: ٻارن جي پهچ کان پري رکو.

3. پراڊڪٽ ختمview

The BN-LINK Digital Programmable Timer features a robust design suitable for various applications. It includes a digital display for easy programming and two grounded outlets for connecting devices.

3.1 اجزاء

• LCD ڊسپلي: موجوده وقت، ڏينهن، ۽ پروگرام جي حيثيت ڏيکاري ٿو.
• ڪنٽرول بٽڻ: WEEK, HOUR, MIN, R (Random), CLOCK, PROG (Program), MANUAL, RESET.
• ٻٽي گرائونڊ آئوٽليٽ: Two outlets for connecting electrical devices.
• پاور ڪنڊ: 18-inch heavy-duty cord with a 3-prong plug.
• اندروني بيٽري: Rechargeable battery for program retention during power outages.

3.2 اهم خاصيتون

• Up to 8 ON/OFF programs.
• 7-day programmable cycles (daily, specific days, weekdays, weekends, etc.).
• Daylight Saving Time (DST) adjustment.
• Random (Vacation) mode for enhanced security.
• Weatherproof and heavy-duty construction for outdoor use.

Figure 1: BN-LINK 7-Day Outdoor Digital Programmable Timer, showing the digital display, control buttons, and power cord.

Figure 2: Diagram illustrating the timer's multifunctional features, including 8 ON/OFF programs, 7-day programmability, and dual 3-prong outlets.

4. شروعاتي سيٽ اپ

Before first use, or after a prolonged period of storage, the internal battery may need charging. Plug the timer into a standard 125VAC outlet for at least 30 minutes to charge the battery. The display should become active.

4.1 Resetting the Timer

To clear all previous settings and reset the timer, use a small pointed object (like a pen tip) to press the ري سيٽ ڪريو button located on the front panel. The display will show '12:00 AM' and 'MO' (Monday).

4.2 موجوده وقت ۽ ڏينهن مقرر ڪرڻ

1. کي دٻايو گھڙي button once. The current day will flash.
2. دٻايو هفتو to select the current day (MO, TU, WE, TH, FR, SA, SU).
3. دٻايو ڪلاڪ to set the current hour (AM/PM).
4. دٻايو منٽ موجوده منٽ قائم ڪرڻ لاء.
5. دٻايو گھڙي ٻيهر تصديق ڪرڻ ۽ وقت سيٽنگ موڊ مان نڪرڻ لاءِ.

5. آپريٽنگ هدايتون

5.1 پروگرامنگ آن/آف سائيڪلون

The timer allows for up to 8 distinct ON/OFF programs. Each program consists of an ON time and an OFF time, which can be set for specific days or groups of days.

1. کي دٻايو واڌو button. The display will show '1 ON' and the time will flash.
2. دٻايو هفتو to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
3. دٻايو ڪلاڪ ۽ منٽ to set the desired ON time.
4. دٻايو واڌو again. The display will show '1 OFF' and the time will flash.
5. دٻايو هفتو, ڪلاڪ، ۽ منٽ to set the desired OFF time for program 1.
6. Repeat steps 1-5 for programs 2 through 8 as needed.
7. سڀ گهربل پروگرام سيٽ ڪرڻ کان پوءِ، دٻايو گھڙي موجوده وقت جي ڊسپلي ڏانهن موٽڻ لاءِ بٽڻ دٻايو.

شڪل 3: مثالamples of setting ON/OFF programs for automated control of outdoor lighting and devices.

5.2 دستي اوور رائڊ

کي دٻايو دستور button to cycle through different operating modes: آٽو آن, اوٽ بند، ۽ ON, بند. ۾ خودڪار آن / بند mode, the timer will follow the programmed settings. In ON mode, the outlets are continuously on. In بند mode, the outlets are continuously off.

5.3 ڏينهن جي روشني بچائڻ جو وقت (DST)

To activate or deactivate Daylight Saving Time, press and hold the ڪلاڪ بٽڻ دٻايو ۽ پوءِ منٽ button simultaneously. The display will show '+1h' when DST is active, adjusting the time forward by one hour.

5.4 Random (Vacation) Mode

To activate the Random (Vacation) mode, press the R button. The display will show 'RND'. In this mode, the timer will randomly turn connected lights ON and OFF within a set period, simulating occupancy to deter potential intruders. Press R ٻيهر غير فعال ڪرڻ لاء.

Figure 4: The timer's Random (Vacation) Mode, designed to enhance home security by randomly activating lights.

6. تنصيب

The BN-LINK timer is designed for both indoor and outdoor use. Its weatherproof construction ensures durability in various conditions.

• ٻاهرين چڙهڻ: For optimal waterproofing and longevity, mount the timer vertically with the outlets facing downwards. Ensure it is positioned at least 2 feet above the ground.
• لڳائڻ: Choose a location that is easily accessible for programming but protected from direct heavy rainfall or standing water.

Figure 5: Illustration demonstrating the recommended vertical mounting of the weatherproof timer at least 2 feet above ground.

Figure 6: The BN-LINK timer installed outdoors, controlling string lights, showcasing ان جي موسم کان بچاءُ واري ڊيزائن.

7. ايپليڪيشنون

This versatile timer is suitable for a wide range of electrical devices and lighting, both indoors and outdoors.

• Outdoor lighting (e.g., Christmas lights, garden lights, string lights)
• Pond pumps and fountains
• موڪلن جي سجاڳي
• اندروني ايلamps and appliances

Figure 7: A visual representation of various applications for the BN-LINK timer, including holiday decorations, pool pumps, and garden features.

8. سار سنڀال

To ensure the longevity and proper functioning of your timer:

• Keep the timer clean and free from dirt and debris.
• سخت ڪيميائي استعمال ڪرڻ کان پاسو ڪريو يا صاف ڪندڙ صاف ڪندڙ.
• جڏهن گهڻي عرصي تائين استعمال ۾ نه هجي ته سڪي جاءِ تي ذخيرو ڪريو.

9. مسئلا حل ڪرڻ

• ٽائمر پروگرام مطابق آن/آف نه ٿي رهيو آهي:
  Ensure the timer is in خودڪار آن / بند mode. Verify that the ON/OFF times and days are correctly set in the program. Check the power connection.
• ڊسپلي خالي يا مدھم آهي:
  The internal battery may be depleted. Plug the timer into an outlet for at least 30 minutes to charge. If the issue persists, perform a ري سيٽ ڪريو.
• Outlets not receiving power:
  Check the power source. Ensure the timer is plugged in securely. Verify the operating mode is set to ON or آٽو آن during the programmed ON period.

10. وضاحتون

11. وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official BN-LINK webسائيٽ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.