Irfora PC102 پورٽبل واٽر ڪوالٽي ٽيسٽر يوزر مينوئل

1. تعارف

The Irfora PC102 is a portable digital water quality tester designed to quickly and accurately measure pH and chlorine (CL2) levels in swimming pools, spas, and other water sources. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device.

اهم خاصيتون:

• Measures pH and CL2 levels.
• Large screen display for clear readings.
• Portable and handheld design.
• Recommended chlorine level for pools and spas: 1.2 ~ 1.7 ppm.
• Recommended pH level for pools and spas: 7.2 ~ 7.8 pH.

2. حفاظت جي ڄاڻ

اهم حفاظتي احتياط:

• Do not immerse the main unit in water. The device is not waterproof.
• Probes are advised NOT to be immersed in any liquid other than pool or spa water.
• ڊوائيس ٻارن جي پهچ کان پري رکو.
• Handle the probes with care to avoid damage.
• پڪ ڪريو ته بيٽري جو ٽڪرو محفوظ طور تي بند ڪيو ويو آهي پاڻي جي داخل ٿيڻ کي روڪڻ لاء.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• 1 x Irfora PC102 PH and CL2 Probe Tester
• 1 x Sheet of Sandpaper
• 1 x استعمال ڪندڙ دستياب (انگريزي)

4. پراڊڪٽ ختمview

Familiarize yourself with the components of your PC102 Water Quality Tester.

شڪل 4.1: سامهون view of the PC102 tester showing the pH and CL2 measurement scales.

Figure 4.2: The PC102 main unit connected to its probe via a coiled cable.

Figure 4.3: Dimensions of the PC102 tester and probe, along with the battery compartment location and PH/CL2 conversion button.

• مکيه يونٽ: Contains the display, control buttons, and battery compartment.
• تحقيق: Connected to the main unit via a coiled cable, used for water immersion.
• PH/CL2 Conversion Button: Located on the main unit, used to switch between pH and CL2 measurement modes.
• ڊسپلي اسڪرين: Shows the measurement results.

5. سيٽ اپ

5.1 بيٽري لڳائڻ

1. مکيه يونٽ جي پٺي تي بيٽري جي خاني کي ڳوليو.
2. بيٽري جو ڍڪ کوليو.
3. Insert one 1.5V AA battery, ensuring correct polarity. (Battery not included)
4. بيٽري جي ڍڪ کي محفوظ طور تي بند ڪريو.

Figure 5.1: Illustration of the battery compartment and battery type (1x AA battery).

5.2 Initial Calibration (Recommended)

For accurate results, it is recommended to calibrate the meter before first use and whenever accuracy is suspected. Refer to the specific calibration instructions provided with your calibration solution (not included) or consult a pool/spa professional.

Note: The provided sandpaper sheet can be used to gently clean the probe tips if they appear corroded or dirty, which can affect accuracy. Use sparingly and with care.

6. آپريٽنگ هدايتون

Follow these steps to measure water quality:

1. Prepare the Tester:
   • Ensure the probes are clean and dry.
   • Turn on the device by pressing the "PH/CL2" button.
2. ماپ جو طريقو چونڊيو:
   • Use the "CL2 / PH" switch on the main unit to select either Chlorine (CL2) or pH measurement mode.
3. Immerse the Probe:
   • Carefully immerse the probe into the water of the swimming pool or spa. Ensure the probe tips are fully submerged.
   • Do not immerse the main unit.
   

   Figure 6.1: The PC102 probe being used to measure water quality in a swimming pool.
4. ماپ پڙهو:
   • Wait for the reading on the large screen display to stabilize.
   • Note the pH or CL2 level displayed.
5. Compare to Recommended Levels:
   • Recommended CL2 content for pools/spas: 1.2 ~ 1.7 ppm.
   • Recommended pH value for pools/spas: 7.2 ~ 7.8.
   

   Figure 6.2: Recommended CL2 and pH levels for swimming pools and spas, along with examples of use in various water environments.
6. هٽايو ۽ صاف ڪريو:
   • After measurement, remove the probe from the water.
   • Rinse the probe with clean water and dry it thoroughly.
7. Store the Tester:
   • ڊوائيس بند ڪريو.
   • Insert the probe into the designated slot on the main unit for convenient storage and portability.
   

   Figure 6.3: The probe slot on the PC102 main unit for secure storage of the probe.

7. سار سنڀال

• تحقيق جي صفائي: Always rinse the probe with clean water after each use and dry it thoroughly. If the probe tips become dirty or corroded, gently clean them with the provided sandpaper sheet.
• اسٽوريج: Store the PC102 in a cool, dry place away from direct sunlight and extreme temperatures. Utilize the probe slot for secure storage.
• بيٽري مٽائڻ: Replace the AA battery when the display becomes dim or the device fails to power on.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Irfora webسائيٽ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.