انٽيڪ SA02005 M.2 NVMe ڊبل ايس ايس ڊي انڪلوزر يوزر مينوئل

تعارف

This manual provides comprehensive instructions for the Inateck SA02005 M.2 NVMe Dual SSD Enclosure. It covers product features, package contents, setup procedures, operational modes including data transfer and offline cloning, maintenance guidelines, troubleshooting steps, and technical specifications. Please read this manual thoroughly before using the device to ensure proper operation and to maximize its performance and longevity.

پيڪيج مواد

• Inateck SA02005 M.2 NVMe Dual SSD Enclosure
• USB-C to USB-A/C Data Cable
• پاور اڊاپٽر (5V/4A)
• Silicone Thermal Pads
• استعمال ڪندڙ دستي

پيداوار ختمview

Familiarize yourself with the components of your Inateck SA02005 enclosure:

تصوير: Inateck SA02005 M.2 NVMe Dual SSD Enclosure with labeled components. This image highlights the Source Drive Indicator, Target Drive Indicator, Power Indicator, Clone Button, Power Button, and Open-cover Button, along with the Source and Target drive slots.

• SSD Slots (Source & Target): Two slots for M.2 NVMe SSDs.
• Open-cover Buttons: Located on the sides, these buttons release the top covers for SSD installation.
• پاور بٽڻ: Controls the device's power.
• Clone Button: آف لائن ڪلوننگ جي عمل کي شروع ڪري ٿو.
• LED اشارا: Display power status, drive activity, and cloning progress (25%, 50%, 75%, 100%).
• USB-C پورٽ: For data connection to a host device.
• ڊي سي 5V پاور ان پٽ: For connecting the external power adapter.
• Cooling Fan & Vents: Integrated for efficient heat dissipation.

سيٽ اپ ڪريو

1. M.2 SSDs انسٽال ڪرڻ

1. انڪلوزر کوليو: Press the open-cover buttons on both sides of the enclosure simultaneously to release and open the top covers.


تصوير: A hand demonstrating how to open the Inateck SA02005 enclosure by pressing the side buttons, revealing the internal SSD slots.

2. ايس ايس ڊي داخل ڪريو: Carefully insert your M.2 NVMe SSDs (M Key or B+M Key, sizes 2230/2242/2260/2280) into the designated slots. Ensure they are seated firmly. The enclosure supports various M.2 NVMe SSD sizes.

تصوير: A diagram illustrating the compatibility of the enclosure with M.2 NVMe SSDs of various lengths (2230, 2242, 2260, 2280) and M Key / B+M Key types. It also shows that SATA SSDs are not supported.
3. ٿرمل پيڊ لاڳو ڪريو: Remove the protective film from a silicone thermal pad and place it directly on top of each inserted M.2 SSD. This enhances heat dissipation.
4. انڪلوزر بند ڪريو: Gently close the top covers until they click securely into place.

2. ڪمپيوٽر سان ڳنڍڻ

1. پاور Connectنيو: Plug the provided power adapter into the DC 5V input port on the enclosure, then connect it to a power outlet.
2. ڊيٽا ڪيبل ڳنڍيو: Use the USB-C to USB-A/C data cable to connect the enclosure's USB-C port to an available USB port on your computer.

آپريٽنگ موڊس

1. Data Transfer Mode

Once connected to your computer, the enclosure functions as an external dual SSD docking station. It supports simultaneous read and write operations for both installed SSDs.

• تيز رفتار ٽرانسميشن: The enclosure utilizes USB 3.2 technology, offering data transfer speeds of up to 10Gbps for a single drive.


تصوير: The Inateck SA02005 enclosure connected to a laptop via USB-C, illustrating its 10Gbps high-speed data transfer capability.

• وسيع مطابقت: The device is plug-and-play compatible with Windows 7 and above, Mac OS 10.5 and above, and Linux operating systems.


تصوير: The Inateck SA02005 enclosure connected to a laptop, demonstrating its compatibility with multiple operating systems like Mac OS, Windows, and Linux.

• خودڪار سمهڻ فنڪشن: To conserve power and extend SSD lifespan, the enclosure will automatically enter sleep mode after 10 minutes of inactivity. Note that the exact sleep time may vary depending on the host system.
• بلٽ ان کولنگ فين: The integrated cooling fan and aluminum shell vents provide efficient heat dissipation. The fan activates automatically when the internal temperature reaches a certain threshold during use.

تصوير: هڪ ڌماڪو ٿيو view of the Inateck SA02005 enclosure highlighting the built-in cooling fan and ventilation. A graph illustrates temperature reduction with the Inateck cooling system compared to other solutions.

2. Offline Cloning Mode

The enclosure supports offline cloning of two M.2 SSDs without requiring a computer connection. This feature is ideal for duplicating drives or upgrading to a larger capacity SSD.

تصوير: The Inateck SA02005 enclosure set up for one-click offline cloning, showing a source SSD and a target SSD, with an arrow indicating the cloning direction. The power adapter is connected.

1. ڊرائيو تيار ڪريو: Insert the source SSD into the 'Source' slot and the target SSD into the 'Target' slot.
2. اهم نوٽ: The capacity of the target drive must be greater than or equal to the capacity of the source drive for successful cloning.
3. پاور Connectنيو: Ensure the power adapter is connected to the enclosure and a power outlet. The enclosure does not need to be connected to a computer for offline cloning.
4. Initiate Cloning: Press and hold the 'Clone' button for approximately 5 seconds until the LED indicator lights begin to flash, indicating the start of the cloning process.
5. مانيٽر ترقي: The LED indicators (25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
6. مڪمل ٿيڻ: Cloning is complete when the 100% LED indicator remains solid.

سار سنڀال

• صفائي: انڪلوزر جي ٻاهرين حصي کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. مائع صاف ڪندڙ يا محلول استعمال ڪرڻ کان پاسو ڪريو.
• وينٽيليشن: Ensure the cooling vents are not obstructed to maintain optimal airflow and heat dissipation.
• اسٽوريج: جڏهن استعمال ۾ نه هجي، ته انڪوزر کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.

مشڪلاتون

• ڪمپيوٽر پاران ايس ايس ڊي جي سڃاڻپ نه ٿيڻ:
  • Ensure the SSDs are correctly inserted into the slots.
  • Verify that the USB data cable and power adapter are securely connected.
  • ڪوشش ڪريو ته انڪلوزر کي پنهنجي ڪمپيوٽر تي ڪنهن ٻئي USB پورٽ سان ڳنڍيو.
  • For new SSDs, they may need to be initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS) before they can be used.
  • Confirm the SSD is an M.2 NVMe (M Key or B+M Key) and not a SATA SSD, as SATA SSDs are not supported.
• آف لائن ڪلوننگ ناڪام ٿئي ٿي يا شروع نه ٿئي ٿي:
  • Ensure the target SSD's capacity is greater than or equal to the source SSD's capacity.
  • Verify both SSDs are properly seated in their respective 'Source' and 'Target' slots.
  • Confirm the power adapter is connected and providing power.
  • Press and hold the 'Clone' button for the required 5 seconds until the indicator lights flash.
• سست ڊيٽا منتقلي جي رفتار:
  • Ensure you are connecting the enclosure to a USB 3.2 Gen 2 (10Gbps) compatible port on your computer. Older USB ports (e.g., USB 2.0, USB 3.0/3.1 Gen 1) will result in lower speeds.
  • Check the condition of the USB data cable. Try a different high-quality USB 3.2 Gen 2 cable if available.
  • Performance can also be affected by the SSD's speed and the host system's capabilities.
• انڪلوزر وڌيڪ گرم ٿيڻ:
  • Ensure the thermal pads are correctly placed on the SSDs.
  • Verify that the cooling vents are not blocked.
  • The built-in fan activates automatically when needed. If the fan is not audible during heavy use, contact support.

وضاحتون

وارنٽي ۽ سپورٽ

Inateck products are designed for reliability and performance. This product is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Inateck webسائيٽ تي وڃو يا انهن جي ڪسٽمر سپورٽ ٽيم سان رابطو ڪريو. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.