SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System

1. تعارف

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Figure 1: SYNCO XTalk XPro2 Headset System and Accessories

2. پراڊڪٽ ختمview

The SYNCO XTalk XPro2 is a full-duplex wireless intercom headset system designed for professional team communication. Key features include:

• Enhanced Signal Reception: External antennas provide a reliable 500m (1640ft) connection range.
• ترقي يافته شور جي گھٽتائي: Features 2.0 AEC algorithm (150Hz to 7KHz) for clear voice recognition in noisy environments.
• Flexible Team Communication: Supports up to 13-unit connections with group expansion technology.
• بوسٽ موڊ: Enhances signal strength for stable communication through obstacles.
• غالب موڊ: One-button remote muting function for the Master headset.
• ڊگھي بيٽري زندگي: Over 24 hours of use with rechargeable and replaceable batteries.
• حقيقي وقت جي نگراني: 3.5mm monitoring jack for simultaneous communication and device audio monitoring.

Figure 2: Enhanced Signal Reception

Figure 3: Advanced AEC Noise Reduction

3. سيٽ اپ

3.1 Manual Pairing

Follow these steps to manually pair your headsets:

1. سڀني headsets تي طاقت.
2. Set one headset as the Master and the others as Level 1.
3. Within 1 minute, long press all 'A' buttons. Release after the first beep. You will hear "Pairing Succeed".
4. Restart all headsets.

3.2 Using SYNCO EasyGo Software

For quick firmware upgrades, voice pack installations, and headset pairing, use the SYNCO EasyGo software. Refer to the user guide for software download and usage instructions from the SYNCO official site.

Figure 4: SYNCO EasyGo Software Interface

4. آپريٽنگ هدايتون

4.1 حجم سيٽنگون

Short press the volume '+' or '-' buttons on the headset to adjust the listening volume.

4.2 Mute/Unmute Microphone

To mute or unmute the microphone, rotate the boom arm up or down. Rotating it up mutes the microphone, and rotating it down unmutes it.

4.3 شور جي منسوخي

Short press button 'B' to toggle noise cancellation on or off. You will hear a beep to confirm the change.

4.4 Dominant Mode

Press and hold button 'B' to enter Dominant Mode. This mode allows the Master headset to mute all remote headsets instantly. Release the button to exit Dominant Mode.

4.5 بوسٽ موڊ

Long press the volume '-' button to hear a "beep", then release to switch between Mode 1, Mode 2, and Mode 3. Mode 2 is the default. Boost Mode enhances signal strength for stable communication, especially through obstacles.

4.6 Real-Time Monitoring

Connect the headset to a device (e.g., camera, recorder) via the 3.5mm TRS port for real-time audio monitoring. This port is for monitoring only and does not output audio.

Figure 5: Real-Time Monitoring Setup

5. اشارا

The LED indicator on the microphone boom arm provides status information:

• سائي روشني مستحڪم: جوڙڻ ڪامياب
• Green Light Flashing Slow: ڳنڍيل ناهي
• Green/Yellow Lights Alternating: شور منسوخي بند
• Red Light Flashing Slow: گھٽ بيٽري
• ڳاڙهي روشني مستحڪم: چارج ڪرڻ

6. سار سنڀال

To ensure the longevity and optimal performance of your SYNCO XTalk XPro2 headset system, follow these maintenance guidelines:

• صفائي: هيڊ سيٽ صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. سخت ڪيميڪلز يا رگڙيندڙ مواد استعمال ڪرڻ کان پاسو ڪريو.
• اسٽوريج: هيڊ سيٽ کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
• بيٽري جي سنڀال: The system uses rechargeable and replaceable Lithium-Ion batteries. Ensure batteries are fully charged before extended use and stored properly if not used for long periods.
• مائڪروفون تحفظ: Keep the microphone foam cover clean and replace if damaged to maintain audio quality.

Figure 6: 24-Hour Battery Life

7. مسئلا حل ڪرڻ

If you encounter issues with your SYNCO XTalk XPro2 system, refer to the following common problems and solutions:

• No Audio/Intermittent Connection:
  • پڪ ڪريو ته سڀئي هيڊ سيٽ آن آهن ۽ مڪمل طور تي چارج ٿيل آهن.
  • Verify proper pairing between Master and Level 1 headsets (refer to Section 3.1).
  • Check the operating range; move closer to the Master headset.
  • Restart all headsets.
• Poor Audio Quality/Excessive Noise:
  • Ensure Noise Cancellation is activated (refer to Section 4.3).
  • Check microphone position and ensure it is not obstructed.
  • Verify that the microphone boom arm is fully down for unmuted operation.
• هيڊ سيٽ چارج نه ٿي رهيو آهي:
  • پڪ ڪريو ته چارجنگ ڪيبل هيڊ سيٽ ۽ پاور سورس ٻنهي سان محفوظ طور تي ڳنڍيل آهي.
  • ڪارڪردگي لاء طاقت جو ذريعو چيڪ ڪريو.
  • Verify the charging indicator (Red Light Steady) as per Section 5.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات، ٽيڪنيڪل سپورٽ، يا سروس جي پڇا ڳاڇا لاءِ، مھرباني ڪري سرڪاري SYNCO جو حوالو ڏيو. webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.