1. تعارف
This manual provides detailed instructions for the proper use and maintenance of your UHPPOTE RF Wireless Remote Control Transmitter, Model HBK-T01. This device is designed to operate compatible UHPPOTE RF remote control systems, such as gate openers, door access controls, and other 433.92MHz RF receivers. Please read this manual thoroughly before operation to ensure safe and effective use.
Figure 1.1: UHPPOTE HBK-T01 RF Wireless Remote Control Transmitters (3-Pack)
2. پراڊڪٽ ختمview
2.1 اهم خاصيتون
- ٽرانسميشن فريڪئنسي: 433.92MHz. This remote is only compatible with UHPPOTE RF remote control systems operating on this frequency.
- Fixed Code: The remote utilizes a fixed code system, allowing for straightforward programming.
- قابل پروگرام: This remote control is shipped with an empty code and requires user programming to function with your specific receiver.
- طاقت جو ذريعو: Powered by 2pcs CR2016 batteries (included).
- بيٽري جي زندگي: Tested for approximately 50,000 cycles.
2.2 اجزاء
هر پيڪيج ۾ شامل آهن:
- UHPPOTE HBK-T01 RF Wireless Remote Control Transmitter
- 2 x CR2016 Batteries (pre-installed or included separately)
Figure 2.1: Ergonomic Design and Wireless Signal Transmission
Figure 2.2: Compact Remote with Integrated Keychain Loop
شڪل 2.3: پوئتي View Showing Model Number HBK-T01 and FCC ID
3. سيٽ اپ ۽ پروگرامنگ
3.1 بيٽري جي تنصيب / متبادل
The remote control is powered by two CR2016 batteries. If the remote is not responding or the indicator light is dim, the batteries may need replacement.
- Locate the small screws on the back of the remote control.
- Using a small screwdriver, carefully remove the screws and open the casing.
- Remove the old CR2016 batteries.
- Insert two new CR2016 batteries, ensuring correct polarity (+ and -).
- بند ڪريو <casing and secure it with the screws.
Figure 3.1: Battery Replacement Guide for CR2016 Batteries
3.2 پروگرامنگ ريموٽ ڪنٽرول
The HBK-T01 remote control is shipped with an empty code and پروگرام ٿيڻ گهرجي to your specific UHPPOTE receiver unit before use. The programming procedure is typically performed on the receiver unit itself, not on the remote control.
اهم: Programming instructions vary depending on the specific UHPPOTE receiver model you are using. Please refer to the instruction manual provided with your UHPPOTE receiver for detailed programming steps. If you do not have the receiver's manual or require further assistance, please contact UHPPOTE customer support.
Figure 3.2: Integration with Electric Lock Systems (Receiver required)
4. آپريٽنگ هدايتون
Once the HBK-T01 remote control is successfully programmed to your UHPPOTE receiver, operation is straightforward:
- Ensure the receiver unit is powered on and within range.
- Press the button on the HBK-T01 remote control.
- The remote will transmit an RF signal to the programmed receiver.
- The receiver will then activate the connected device (e.g., open a gate, unlock a door, turn on a light).
The blue LED indicator on the remote will illuminate when the button is pressed, indicating signal transmission.
Figure 4.1: Versatile Applications of the HBK-T01 Remote Control
5. سار سنڀال
- صفائي: ريموٽ ڪنٽرول کي نرم، سڪل ڪپڙي سان صاف ڪريو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو.
- بيٽري چيڪ: If the remote's performance degrades, check and replace the batteries as described in Section 3.1.
- اسٽوريج: ريموٽ ڪنٽرول کي ٿڌي، سڪل جاءِ تي محفوظ ڪريو سڌو سج جي روشني ۽ انتهائي گرمي پد کان پري.
- اثر کان بچڻ: Do not drop or subject the remote control to strong impacts, as this may damage internal components.
6. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Remote does not respond / No LED light | مئل يا غلط طور تي نصب ٿيل بيٽريون. | Replace batteries (CR2016) and ensure correct polarity. |
| Remote LED lights up, but device does not respond | Remote not programmed to receiver, or receiver is out of range/powered off. | Verify programming with receiver's manual. Ensure receiver is powered and within operating range. Check receiver's status. |
| محدود آپريٽنگ رينج | Obstructions (walls, metal structures), radio interference, low battery. | Move closer to the receiver. Remove obstructions. Check for sources of interference. Replace batteries. |
| ريموٽ ڪم وقفي وقفي سان | Low battery, intermittent interference. | Replace batteries. Try operating from a different location to rule out interference. |
7. وضاحتون
- برانڊ: UHPPOTE
- ماڊل نمبر: HBK-T01
- رنگ: ڪارو
- طاقت جو ذريعو: بيٽري سان هلندڙ
- بيٽريون: 2 x CR2016 (شامل)
- جلدtage: 6 وولٽ
- ٽرانسميشن فريڪئنسي: 433.92MHz
- رابطي ٽيڪنالاجي: وائرليس (آر ايف)
- ڪنٽرول جو طريقو: ريموٽ
- مطابقت رکندڙ ڊوائيسز: UHPPOTE's RF remote control receivers
- شيون طول و عرض (L x W x H): 2.3 x 1.3 x 0.5 انچ (5.84 x 3.30 x 1.27 سينٽي)
- شيء جو وزن: 4.6 آونس (130 گرام)
- انسٽاليشن جو قسم: وائرليس DIY
- خبرداري جو قسم: Entry Only (refers to typical application with entry systems)
8. وارنٽي ۽ سپورٽ
8.1 وارنٽي ڄاڻ
For detailed warranty information regarding your UHPPOTE HBK-T01 remote control, please refer to the warranty card included with your purchase or visit the official UHPPOTE webسائيٽ. وارنٽي جون شرطون ۽ ضابطا علائقي ۽ پرچون ڪندڙ جي لحاظ کان مختلف ٿي سگهن ٿا.
8.2 ڪسٽمر سپورٽ
If you encounter any issues, have questions about programming, or require technical assistance, please contact UHPPOTE customer support. You can typically find contact information on the product packaging, the UHPPOTE official webسائيٽ، يا توهان جي خريداري جي نقطي ذريعي.
UHPPOTE Official Webسائيٽ: Visit UHPPOTE Store on Amazon
