Xhorse 2.5mm Milling Cutter Instruction Manual

1. پراڊڪٽ ختمview

This manual provides essential information for the proper use and maintenance of the Xhorse Original 2.5mm Milling Cutter. Designed for precision key cutting, this cutter is a critical component for various Xhorse key cutting machines.

پيداوار جو نالو: Xhorse Original 2.5mm Milling Cutter

ماڊل نمبر: HKSL25

مطابقت: This milling cutter is specifically designed for use with the following Xhorse key cutting machines:

• Condor XC-Mini Plus
• Condor XC-Mini Plus II
• Condor XC-002
• Dolphin XP005
• Dolphin XP005L
• Dolphin XP007

Image 1: Xhorse 2.5mm Milling Cutters in packaging.

Image 2: Xhorse 2.5mm Milling Cutter compatibility with various Xhorse key cutting machines.

2. حفاظت جي ڄاڻ

Always prioritize safety when working with cutting tools and machinery. Failure to follow safety guidelines can result in injury or damage to equipment.

• اکين جي حفاظت: اڏامندڙ ملبي کان بچائڻ لاءِ هميشه مناسب اکين جي حفاظت (حفاظتي چشمو يا چشمو) پائڻ.
• هٿ جي حفاظت: Use gloves when handling cutters to prevent cuts and to maintain a firm grip.
• پاور ڪنيڪشن: Ensure the key cutting machine is powered off and unplugged before installing, removing, or performing maintenance on the milling cutter.
• محفوظ تنصيب: Verify that the cutter is securely installed in the machine's spindle before operation. A loose cutter can cause damage or injury.
• Inspect Cutter: Before each use, inspect the cutter for any signs of damage, wear, or dullness. Do not use damaged cutters.
• صاف رکو: Keep hands, loose clothing, and long hair away from moving parts during machine operation.
• وينٽيليشن: Ensure adequate ventilation in the work area, especially when cutting materials that may produce fine dust.
• ٻار ۽ پالتو جانور: Keep children and pets away from the work area and operating machinery.

3. سيٽ اپ ۽ تنصيب

Proper installation of the milling cutter is crucial for accurate key cutting and to prevent damage to the cutter or machine.

1. بجلي بند: Ensure your Xhorse key cutting machine is turned off and unplugged from the power source.
2. رسائي اسپنڊل: Open the machine's protective cover to access the cutter spindle area.
3. Remove Old Cutter (if applicable): If replacing an existing cutter, carefully loosen the retaining screw(s) or collet nut that secures the cutter. Remove the old cutter, exercising caution as it may be sharp or hot if recently used.
4. Clean Spindle: Clean the spindle and collet area to remove any debris or metal shavings. A clean seating surface ensures proper alignment.
5. Insert New Cutter: Carefully insert the Xhorse 2.5mm Milling Cutter into the collet. Ensure it is seated fully and correctly. Do not force the cutter.
6. Secure Cutter: Tighten the retaining screw(s) or collet nut firmly. Do not overtighten, as this can damage the cutter or collet. Ensure the cutter is held securely and does not wobble.
7. ڍڪ بند ڪريو: Close the machine's protective cover.
8. پاور آن: Plug in and power on your key cutting machine. Perform a test cut or calibration as recommended by your machine's specific manual.

Image 3: Installing the milling cutter into an Xhorse key cutting machine.

4. آپريٽنگ هدايتون

The Xhorse 2.5mm Milling Cutter is designed for precise key duplication and cutting. Always refer to your specific Xhorse key cutting machine's manual for detailed operating procedures.

• Machine Calibration: Before cutting, ensure your key cutting machine is properly calibrated according to its manufacturer's instructions. This includes probe calibration and jaw alignment.
• Key Blank Selection: Use the correct key blank for the key you intend to cut.
• Secure Key Blank: Firmly secure the key blank and the original key (if duplicating) in the machine's clamps. Ensure they are aligned correctly.
• Cutting Parameters: Select the appropriate cutting parameters (e.g., key type, depth, speed) on your machine's interface. The 2.5mm cutter is suitable for a wide range of standard key types.
• Supervise Cutting: Always supervise the key cutting process. Do not leave the machine unattended while it is operating.
• Post-Cut Inspection: After cutting, carefully remove the new key and inspect it for accuracy and burrs. Use a deburring tool or fine file ڪنهن به تيز ڪنارن کي هٽائڻ لاء.

Image 4: Cutters and probes in operational setup on Xhorse key cutting machines.

5. سار سنڀال

Regular maintenance extends the life of your milling cutter and ensures consistent cutting performance.

• صفائي: After each use, carefully remove the cutter from the machine (ensure power is off) and clean it with a soft brush or compressed air to remove metal shavings and debris. Do not use harsh chemicals that could damage the cutter's coating or material.
• چڪاس: Periodically inspect the cutter for signs of wear, chipping, or dullness. A dull cutter will produce poor quality cuts and put undue strain on the machine. Replace worn cutters promptly.
• لوڻ: Some key cutting machines may require lubrication of certain components. Refer to your machine's manual for specific lubrication guidelines. The cutter itself typically does not require lubrication.
• اسٽوريج: Store the milling cutter in its original protective case or a dedicated tool holder when not in use. This prevents damage to the cutting edges and protects against corrosion. Store in a dry, cool place.

6. مسئلا حل ڪرڻ

If you encounter issues during key cutting, consider the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact Xhorse customer support or a qualified service technician.

7. وضاحتون

Detailed specifications for the Xhorse 2.5mm Milling Cutter (Model HKSL25).

Image 5: Comparison of Xhorse probes and milling cutters of various sizes.

8. وارنٽي ۽ سپورٽ

Xhorse products are manufactured to high-quality standards. For specific warranty information regarding your Xhorse 2.5mm Milling Cutter, please refer to the documentation provided with your purchase or visit the official Xhorse webسائيٽ.

For technical support, product inquiries, or warranty claims, please contact Xhorse customer service through their official channels. When contacting support, please have your product model number (HKSL25) and purchase details readily available.

Xhorse Official Webسائيٽ: www.xhorse.com