GBC iSnatch 64051105 Carbon Monoxide Detector User Manual

1. تعارف

This manual provides important information regarding the installation, operation, and maintenance of your GBC iSnatch Carbon Monoxide (CO) Detector. Please read this manual thoroughly before using the device and retain it for future reference.

Carbon monoxide is a colorless, odorless, and tasteless gas that can be fatal. This detector is designed to monitor CO levels and alert you to potentially dangerous concentrations, helping to protect your household.

This CO detector complies with the EN50291-1 standard, ensuring its suitability for household use.

2. حفاظتي ڄاڻ ۽ ڊيڄاريندڙ

اهم: This device is designed to detect carbon monoxide gas. It is not designed to detect smoke, fire, or other gases. It is not a substitute for proper maintenance of fuel-burning appliances, including ventilation and exhaust systems.

• Do not paint the detector. Paint can clog the sensor openings and interfere with the detector's ability to detect CO.
• Do not block the ventilation openings on the detector.
• Test the detector regularly using the test button.
• Replace batteries promptly when the low battery warning is indicated.
• وڌيڪ نمي، انتهائي گرمي پد، يا گهڻي مٽي وارن علائقن ۾ انسٽال نه ڪريو.
• ٻارن جي پهچ کان پري رکو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• GBC iSnatch Carbon Monoxide Detector (Model 64051105)
• استعمال ڪندڙ دستي

4. پراڊڪٽ ختمview

The GBC iSnatch Carbon Monoxide Detector features a compact design with an integrated LCD display and indicator lights for easy monitoring.

شڪل 1: سامهون view of the GBC iSnatch Carbon Monoxide Detector. It features a central digital display showing PPM (parts per million) of CO, a 'TEST' button, and three indicator lights at the bottom: 'POWER' (green), 'FAULT' (yellow), and 'ALARM' (red). Speaker grilles are visible on both sides of the display.

• LCD ڊسپلي: Shows real-time CO concentration in PPM (Parts Per Million).
• ٽيسٽ بٽڻ: Used to verify the sensor and alarm functionality.
• پاور انڊيڪيٽر (سائي ايل اي ڊي): Illuminates when the device is powered on and functioning correctly.
• Fault Indicator (Yellow LED): Illuminates to indicate a fault or low battery condition.
• Alarm Indicator (Red LED): Flashes when a CO alarm condition is detected.
• 85 ڊي بي سائرن: Emits a loud audible alarm during a CO event.

5. سيٽ اپ ۽ تنصيب

5.1 بيٽري لڳائڻ

The detector operates on 1 x 9V battery (not included). Ensure the battery is installed correctly before use.

1. Locate the battery compartment cover on the back of the detector.
2. بيٽري جي ڪمري کي کوليو.
3. هڪ 9V بيٽري داخل ڪريو، صحيح قطبيت (+/-) کي ڏسندي.
4. بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.
5. Upon successful battery installation, the detector will perform a self-test, and the green POWER LED should illuminate.

5.2 انسٽاليشن جي جڳھ چونڊڻ

For optimal performance and safety, consider the following when choosing a location:

• پنهنجي گهر جي هر منزل تي گهٽ ۾ گهٽ هڪ CO ڊيٽيڪٽر نصب ڪريو، خاص طور تي سمهڻ وارن علائقن جي ويجهو.
• Place the detector at a height where it can be easily seen and heard, typically at eye level or higher.
• Avoid installing near fuel-burning appliances (furnaces, water heaters, stoves) to prevent nuisance alarms from normal operation.
• Do not install in direct sunlight, near windows or doors, or in areas with strong drafts, as this can affect sensor accuracy.
• Maintain a distance of at least 1.5 meters (5 feet) from any cooking or heating appliance.

شڪل 2: Example installation of the CO detector on a wall in a kitchen area, demonstrating a suitable mounting height.

5.3 ڊيڪٽر کي لڳائڻ

Once you have selected an appropriate location:

1. ڀت تي گهربل چڙهڻ واري پوزيشن کي نشان لڳايو.
2. Drill two holes at the marked positions.
3. Insert wall plugs (if necessary) into the drilled holes.
4. Screw the mounting screws into the wall, leaving a small gap for the detector to hang.
5. Align the mounting slots on the back of the detector with the screws and slide the detector down to secure it.
6. Ensure the detector is firmly attached to the wall.

6. آپريٽنگ هدايتون

6.1 پاور کوليو

After battery installation, the detector will automatically power on. The green POWER LED will light up, and the LCD display will show "0 PPM" or cycle through a brief startup sequence.

6.2 عام آپريشن

During normal operation, the green POWER LED will remain steadily lit, and the LCD display will show "0 PPM" if no CO is detected, or the current CO concentration if present.

6.3 ٽيسٽ فنڪشن

It is recommended to test the detector weekly to ensure proper functionality.

1. ڊيٽيڪٽر جي سامهون واري "TEST" بٽڻ کي دٻايو ۽ رکو.
2. The detector will emit a series of loud beeps (85 dB siren), and the red ALARM LED will flash. The LCD display may show a test value.
3. Release the button. The detector should return to normal operation.
4. If the detector does not respond as described, refer to the Troubleshooting section.

7. Alarm Conditions and Actions

The detector is designed to alarm at specific CO concentrations and durations as per EN50291-1:

• 50 پي پي ايم: 60-90 منٽن اندر الارم.
• 100 پي پي ايم: 10-40 منٽن اندر الارم.
• 300 پي پي ايم: Alarm within 3 minutes.

When a CO alarm occurs:

• The 85 dB siren will sound repeatedly.
• The red ALARM LED will flash rapidly.
• The LCD display will show the detected CO concentration in PPM.

What to do if the alarm sounds:

1. Evacuate Immediately: Move everyone, including pets, to fresh air outdoors.
2. Do Not Re-enter: جيستائين CO جو ذريعو سڃاڻي ۽ درست نه ڪيو وڃي، ۽ علائقي کي چڱي طرح هوا نه ڏني وڃي، تيستائين احاطي ۾ ٻيهر داخل نه ٿيو.
3. Call Emergency Services: Contact your local emergency services or fire department.
4. ذريعو سڃاڻو: After the area is safe, have a qualified technician inspect all fuel-burning appliances and chimneys for proper operation and ventilation.

8. سار سنڀال

8.1 باقاعده جاچ

Test the detector weekly by pressing the "TEST" button as described in Section 6.3.

8.2 بيٽري مٽائڻ

The detector will indicate a low battery condition by flashing the yellow FAULT LED and possibly emitting a chirp sound. Replace the 9V battery immediately when this occurs. Refer to Section 5.1 for battery installation instructions.

8.3 صفائي

Clean the detector regularly to prevent dust buildup from affecting its performance.

• نرم استعمال ڪريو، ڊيamp ڊيٽيڪٽر جي ٻاهرين حصي کي صاف ڪرڻ لاءِ ڪپڙو.
• Do not use cleaning agents, solvents, or abrasive materials.
• Do not spray air fresheners, hairspray, or other aerosols near the detector.
• Gently vacuum around the sensor openings to remove dust.

9. مسئلا حل ڪرڻ

10. وضاحتون

11. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات يا ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري پنھنجي پرچون ڪندڙ يا ٺاھيندڙ جي آفيسر پاران مهيا ڪيل رابطي جي تفصيلن جو حوالو ڏيو. webسائيٽ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

This product is designed for a specific lifespan. It is recommended to replace the CO detector after 7-10 years from the manufacturing date, or as indicated by the device's end-of-life signal, to ensure continued accuracy and reliability.