Lutron Diva LED+ Dimmer Light Switch Instruction Manual

تعارف

The Lutron Diva LED+ dimmer switch is designed to provide optimal dimming performance for a wide range of dimmable LED, Halogen, and Incandescent bulbs. This switch supports up to 150 Watts of dimmable LED/CFL or 600 Watts of incandescent/halogen lighting. It features a paddle switch for on/off control and a discreet slide control for precise light level adjustment. The Diva dimmer can be used in single-pole or 3-way applications, offering versatile control for your home's lighting.

سيٽ اپ ڪريو

Installation of the Lutron Diva LED+ dimmer switch is designed to be straightforward, typically taking as little as 15 minutes. No neutral wire is required, making it suitable for homes of all ages. The dimmer can be installed in single-pole applications (controlling lights from one location) or 3-way applications (controlling lights from two locations) when paired with a mechanical switch.

Figure 1: Wiring diagrams illustrating single-pole, 3-way, and 4-way installations.

Figure 2: Detailed diagram for single-pole wiring, where one Diva Dimmer controls a light from a single location.

For detailed, interactive, step-by-step installation instructions, please refer to Lutron's Wiring Wizard on their official webسائيٽ.

آپريٽنگ هدايتون

The Diva LED+ dimmer switch offers intuitive control over your lighting. Use the large paddle switch to turn lights on or off. When turned on, the lights will return to your previously set preferred level. The discreet slide control located next to the paddle allows you to adjust the brightness to any of the over 250 available lighting levels, creating the perfect ambiance for any activity.

Figure 3: Operating the Diva dimmer switch to set the perfect light level in a kitchen.

Figure 4: The preset level feature allows lights to turn on to your preferred brightness using the discreet slider.

• آن / آف ڪنٽرول: Press the large paddle switch to turn lights on or off.
• ڊمنگ ايڊجسٽمينٽ: Use the small, discreet slider on the side to manually dim or brighten the lights.
• Preset Level: Lights will turn on to the last set brightness level when the paddle switch is pressed.

سار سنڀال

The Lutron Diva LED+ dimmer switch is designed for long-lasting performance with minimal maintenance. No specific routine maintenance is required. For cleaning, simply wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.

مشڪلاتون

If you experience issues such as flickering, lights dropping out, or popping on, the trim level of your dimmer may need adjustment. The Diva LED+ dimmer features a trim wheel or lever (located behind the wallplate) that allows you to manually optimize the dimming performance for your specific bulbs.

Figure 5: The trim wheel on the Diva LED+ dimmer allows for manual adjustment to optimize dimming performance and prevent issues like flickering.

Lutron has extensively tested thousands of bulbs across various brands to ensure optimal dimming compatibility. For specific bulb compatibility information, visit the Lutron LED Compatibility Tool on their official webسائيٽ.

وضاحتون

وارنٽي

The Lutron Diva LED+ dimmer switch comes with a 5-year warranty. Register your product to extend this to a 10-year warranty. Please refer to the product packaging or Lutron's official webمڪمل وارنٽي جي شرطن ۽ شرطن لاء سائيٽ.

حمايت

Lutron provides 24/7, U.S.-based lifetime technical support to assist with any troubleshooting issues or questions you may have regarding your Diva LED+ dimmer switch. Contact information can be found on the product packaging or Lutron's official webسائيٽ.