OWON HDS25 Dual Channel Handheld Digital Oscilloscope Multimeter User Manual

1. تعارف

The OWON HDS25 is a portable 2-in-1 electronic test instrument combining a digital oscilloscope and a multimeter. This device is designed for field use, maintenance, and educational applications, offering a compact and lightweight solution for various electrical measurements.

اهم خاصيتون شامل آهن:

• Dual Channel Oscilloscope with 25 MHz bandwidth and 250 MSa/s real-time sampلي شرح.
• 20,000 count digital multimeter for precise measurements.
• 3.5-inch high-resolution LCD display.
• Built-in rechargeable lithium battery for portability.
• Support for cursor test, 7 types of automatic measurements, and auto-calibration.
• PC software support and SCPI compatibility for advanced control and data analysis.

Image 1.1: The OWON HDS25 highlighting its 2-in-1 oscilloscope and multimeter capabilities, including 25MHz bandwidth, 20,000 counts, and save function.

2. حفاظت جي ڄاڻ

Before operating the device, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Do not use the device if it appears damaged or is not operating correctly.
• ڪنهن به ماپ ڪرڻ کان اڳ پڪ ڪريو ته صحيح ڪم ۽ حد چونڊيل آهن.
• Do not exceed the maximum input ratings for voltage ۽ موجوده.
• Use only the probes and accessories supplied or recommended by OWON.
• Avoid operating the device in wet or damp حالتون.
• Disconnect power to the circuit under test before connecting or disconnecting probes.
• Refer to the warning label on the device for specific electrical shock prevention information.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون موجود آهن ۽ پيڪنگ کولڻ وقت محفوظ آهن:

• OWON HDS25 Handheld Digital Oscilloscope Multimeter
• آسيلو اسڪوپ پروب (پروب)
• Multimeter Test Leads (banana plug type)
• USB-A to USB-C Charging and Data Cable
• استعمال ڪندڙ دستي
• Calibration Tool (e.g., mini screwdriver for probe compensation)

4. ڊوائيس اوورview

The OWON HDS25 features a clear 3.5-inch LCD display and an intuitive control panel. Below is a diagram illustrating the main components and controls.

تصوير 4.1: سامهون view of the OWON HDS25 with key components labeled.

1. Signal Input Connector (BNC): For connecting oscilloscope probes.
2. 3.5 انچ ڊسپلي: Shows waveform, measurement data, and menu options.
3. Multifunction Channel Buttons (F1-F4): Context-sensitive function keys.
4. موڊ بٽڻ: Switches between Oscilloscope, Multimeter, and other modes.
5. سسٽم بٽڻ: Accesses system settings, including language and factory reset.
6. محفوظ ڪريو بٽڻ: Saves current settings, waveforms, or data.
7. پاور آن/آف بٽڻ: ڊوائيس کي آن يا بند ڪري ٿو.
8. Trig/Δ Button: Accesses trigger menu or relative value function.
9. DMM Input Terminals (A, mA, COM, VΩ+C): For connecting multimeter test leads.
10. Horizontal Adjustment (HOR) Button: Adjusts horizontal scale/time base in oscilloscope mode.
11. واپسي بٽڻ: مينيو ۾ واپس نيويگيٽ ڪري ٿو.
12. Measure Range Button: Selects measurement range in multimeter mode or accesses measurement options in oscilloscope mode.
13. تير جي چاٻي: Navigation within menus and waveform adjustments.
14. خودڪار بٽڻ: Auto-sets oscilloscope parameters or auto-ranges in multimeter mode.
15. Stop/Run Button: Pauses or resumes waveform acquisition.

5. سيٽ اپ

5.1 ڊوائيس چارج ڪرڻ

The OWON HDS25 is equipped with a built-in 2000mAh lithium battery. Before first use, fully charge the device using the provided USB-C cable and a compatible USB power adapter (not included).

• Connect the USB-C cable to the device's USB-C port (located under the rubber cover on the side).
• Connect the other end of the USB cable to a USB power source.
• The charging indicator on the device will show the charging status.

Image 5.1: The OWON HDS25 featuring a built-in 2000mAh lithium battery and a USB Type-C charging port.

5.2 شروعاتي پاور آن

Press and hold the Power On/Off button to turn on the device. The device will typically start in the last used mode. You can change the language and other system settings via the 'System' button.

6. آسيلو اسڪوپ هلائڻ

The oscilloscope function allows for visualization and analysis of electrical signals over time.

6.1 ڳنڍڻ وارا جاچ

• Connect the oscilloscope probe(s) to the BNC input connector(s) on the top of the device.
• Ensure the probe's ground clip is securely connected to the circuit's ground.
• Connect the probe tip to the test point of the signal you wish to measure.

6.2 بنيادي ماپ

• Press the 'Mode' button to select the Oscilloscope function.
• Press the 'Auto' button. The device will automatically adjust the vertical and horizontal scales and trigger settings to display a stable waveform.
• Use the 'HOR' button and arrow keys to adjust the horizontal time base.
• Use the 'CH1/2' button (if applicable) and arrow keys to adjust the vertical scale (Volts/Div) for each channel.
• The 'Trig/Δ' button allows access to trigger settings for stable waveform capture.

6.3 Automatic Measurements and Cursor Test

The HDS25 supports 7 types of automatic measurements (e.g., Vpp, Vmax, Vmin, Freq, Period) and cursor tests for precise voltage and time readings on the waveform.

• Press the 'Measure Range' button to access automatic measurement options.
• Navigate through the options using the arrow keys and select desired measurements.
• For cursor tests, activate the cursor function and use arrow keys to position the cursors on the waveform.

7. ملٽي ميٽر هلائڻ

The multimeter function provides precise digital measurements of various electrical parameters.

7.1 ٽيسٽ ليڊز کي ڳنڍڻ

• Connect the red test lead to the VΩ+C terminal and the black test lead to the COM terminal for voltage, resistance, capacitance, and diode measurements.
• For current measurements, connect the red test lead to the 'A' terminal (for high current) or 'mA' terminal (for low current) and the black test lead to the COM terminal.

7.2 Basic Multimeter Measurements

• Press the 'Mode' button to select the Multimeter function.
• Use the 'Measure Range' button to cycle through measurement types (Voltage, Current, Resistance, Capacitance, Continuity, Diode).
• The device supports Auto Range and True RMS for accurate readings.
• For continuity tests, the device will emit an audible tone if continuity is detected.

8. ڊيٽا جو انتظام

The HDS25 allows for saving oscilloscope settings, reference waveforms, and measurement data.

8.1 Saving Data

• Press the 'Save' button to store current oscilloscope settings or waveforms.
• Follow the on-screen prompts to name and save the file.
• Saved data can be recalled for later analysis or comparison.

8.2 PC Connectivity

The device supports connection to a PC via the USB-C port for data transfer and remote control.

• Install the OWON PC software (available from the manufacturer's website) on your computer.
• Connect the HDS25 to your PC using the USB-C cable.
• Use the PC software to read and analyze stored data (CSV, images) or control the oscilloscope functions remotely.

9. سار سنڀال

9.1 صفائي

• ڊوائيس صاف ڪريو casing نرم سان، damp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• Ensure no moisture enters the device through ports or openings.

9.2 اسٽوريج

• ڊوائيس کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
• جيڪڏهن گهڻي عرصي تائين ذخيرو ڪري رهيا آهيو، ته پڪ ڪريو ته بيٽري جزوي طور تي چارج ٿيل آهي (تقريبن 50٪) ته جيئن ان جي عمر وڌندي.

10. مسئلا حل ڪرڻ

If you encounter issues with your OWON HDS25, refer to the following common problems and solutions:

• ڊوائيس آن نه ٿي رهي آهي: Ensure the battery is charged. Connect the device to a USB power source and try again.
• No waveform displayed in oscilloscope mode: Check probe connections. Ensure the 'Auto' button has been pressed or adjust vertical/horizontal scales and trigger settings manually. Verify the signal source is active.
• غلط ملٽي ميٽر ريڊنگ: Ensure test leads are correctly connected to the appropriate terminals. Verify the correct measurement function and range are selected.
• PC software not detecting device: Ensure the USB-C cable is properly connected. Install the correct drivers and PC software from the OWON webسائيٽ.
• Unstable waveform: Adjust the trigger level and trigger mode (e.g., Edge, Auto, Normal) to stabilize the waveform.

For persistent issues, contact OWON customer support.

11. وضاحتون

12. وارنٽي ۽ سپورٽ

OWON products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official OWON webسائيٽ. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.