دستور+

FOXWELL BT301, NT630 Plus

FOXWELL BT301 بيٽري ٽيسٽر ۽ NT630 پلس OBD2 اسڪينر استعمال ڪندڙ دستياب

Models: BT301, NT630 Plus | Brand: FOXWELL

1. تعارف

Welcome to the user manual for your FOXWELL BT301 Battery Tester and NT630 Plus OBD2 Scanner. This comprehensive guide provides detailed instructions on the setup, operation, maintenance, and troubleshooting of both devices. The BT301 is designed for testing 6V and 12V vehicle batteries, while the NT630 Plus offers advanced diagnostic capabilities for OBD2, Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS/Airbag) in vehicles.

Please read this manual thoroughly before operating the devices to ensure correct usage and to prevent damage to the tools or your vehicle.

2. حفاظت جي ڄاڻ

Always observe the following safety precautions when working with vehicle electrical systems and diagnostic tools:

  • Wear appropriate eye protection (safety goggles) and protective clothing.
  • پڪ ڪريو ته ڪم واري علائقي کي چڱي طرح هوادار آهي.
  • Keep a fire extinguisher nearby when working with batteries.
  • Avoid smoking or open flames near vehicle batteries.
  • گرم انجن جي حصن يا ايگزاسٽ سسٽم کي نه ڇهو.
  • ڊوائيسز کي سڪل ۽ صاف رکو. انهن کي نمي يا انتهائي گرمي پد جي سامهون نه رکو.
  • صرف مهيا ڪيل ڪيبل ۽ لوازمات استعمال ڪريو.
  • Disconnect the devices from the vehicle when not in use.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

  • FOXWELL BT301 بيٽري ٽيسٽر يونٽ
  • FOXWELL NT630 Plus OBD2 Scanner Unit
  • OBDII Diagnostic Cable (for NT630 Plus)
  • بيٽري ڪلamp Cable (for BT301)
  • USB ڪيبل (اپڊيٽ لاءِ)
  • استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. پراڊڪٽ ختمview

4.1 FOXWELL BT301 Battery Tester

The BT301 is a dedicated 6V and 12V battery tester designed to accurately assess the health of your vehicle's battery, cranking system, and charging system. It supports various battery types including AGM flat plate, AGM spiral, GEL, EFB, and regular flooded batteries.

FOXWELL BT301 Battery Tester showing main menu with options for Battery, Cranking, Charging, System, View، ۽ سيٽ اپ.

تصوير 4.1: FOXWELL BT301 Battery Tester displaying its main menu options.

Key Features of BT301:

  • بيٽري جي صحت جي چڪاس: Provides a comprehensive analysis of battery condition.
  • ڇڪڻ ٽيسٽ: Evaluates the starter motor's performance.
  • Charging System Test: Assesses the alternator and regulator's output.
  • SOC Test: State of Charge test.
  • SOH Test: State of Health test.
  • Supports 6V and 12V batteries.
  • Compatible with various battery types: AGM Flat Plate, AGM Spiral, GEL, EFB, Regular Flooded.
FOXWELL BT301 Battery Tester connected to various battery types including AGM Flat Plate, AGM Spiral, GEL, and EFB batteries.

تصوير 4.2: The BT301 Battery Tester demonstrating compatibility with multiple battery types.

4.2 FOXWELL NT630 Plus OBD2 Scanner

The NT630 Plus is a powerful diagnostic tool that provides full OBD2 functions, along with specialized diagnostics for Anti-lock Braking System (ABS) and Supplemental Restraint System (SRS/Airbag). It also includes advanced service functions such as ABS Auto Bleed, Steering Angle Sensor (SAS) Calibration, Oil Service Light Reset, and Electronic Parking Brake (EPB) Reset.

FOXWELL NT630 Plus OBD2 Scanner and BT301 Battery Tester side-by-side. The NT630 Plus shows a main menu with options like ABS&Airbag, EPB, Oil Reset, SAS, Settings, and Data Manager.

تصوير 4.3: The FOXWELL NT630 Plus OBD2 Scanner (left) and BT301 Battery Tester (right).

Key Features of NT630 Plus:

  • مڪمل OBD2/EOBD ڪم: Read/Clear Codes, Live Data, Freeze Frame, I/M Readiness, O2 Monitor Test, On-Board Monitor Test, Component Test, Vehicle Info, Modules Present.
  • ABS System Diagnostics: Reads and clears ABS fault codes, performs active tests, and supports ABS Auto Bleed.
  • SRS/Airbag System Diagnostics: Reads and clears SRS fault codes, performs active tests.
  • SAS حساب ڪتاب: اسٽيئرنگ اينگل سينسر کي ري سيٽ ڪري ٿو.
  • Oil Service Light Reset: تيل جي تبديلي کان پوءِ تيل جي سروس لائيٽ کي ري سيٽ ڪري ٿو.
  • اي پي بي ري سيٽ: Resets the electronic parking brake after maintenance.
  • Automatic VIN identification.
Diagram illustrating the three diagnostic systems: OBD2, SRS, and ABS/VSA, within a transparent car outline.

تصوير 4.4: Visual representation of the three main diagnostic systems covered by the NT630 Plus.

5. سيٽ اپ

5.1 Initial Setup for BT301

Connecting the BT301:

  1. Ensure the vehicle's ignition is off.
  2. Connectنيو positiveاڙھو مثبت (+) ڪلamp بيٽري جي مثبت ٽرمينل ڏانهن.
  3. negativeنيو ڪارو منفي (-) ڪلamp بيٽري جي منفي ٽرمينل ڏانھن.
  4. The BT301 will power on automatically.

5.2 Initial Setup for NT630 Plus

Connecting the NT630 Plus:

  1. Locate the vehicle's 16-pin Data Link Connector (DLC), usually under the dashboard on the driver's side.
  2. پڪ ڪريو ته گاڏي جي اگنيشن 'آن' پوزيشن ۾ آهي (انجڻ بند ٿي سگهي ٿو).
  3. Plug the OBDII diagnostic cable into the vehicle's DLC.
  4. Connect the other end of the cable to the NT630 Plus unit.
  5. The NT630 Plus will power on automatically.

6. آپريٽنگ هدايتون

6.1 Using the BT301 Battery Tester

مين مينيو نيويگيشن:

Use the arrow keys (Up, Down, Left, Right) to navigate through menu options. Press the داخل ڪريو چونڊ جي تصديق ڪرڻ لاءِ بٽڻ دٻايو ۽ پوئتي button to return to the previous screen. The مينيو button typically returns to the main menu.

Performing a Battery Test:

  1. مين مينيو مان، چونڊيو بيٽري ۽ دٻايو داخل ڪريو.
  2. Select the appropriate battery type (e.g., Regular Flooded, AGM, GEL) and press داخل ڪريو.
  3. Input the battery's Cold Cranking Amps (CCA) rating, usually found on the battery label, and press داخل ڪريو.
  4. The BT301 will perform the test and display the results, such as battery voltage, measured CCA, and overall battery health (e.g., 'GOOD BATTERY', 'CHARGE BATTERY', 'REPLACE BATTERY').
Close-up of the FOXWELL BT301 screen displaying various battery test results like 'GOOD BATTERY', 'CHARGE BATTERY', 'REPLACE BATTERY', 'CRANKING NORMAL', and 'LOW OUTPUT'.

تصوير 6.1: Example of battery test results displayed on the BT301 screen.

Cranking System Test:

  1. مين مينيو مان، چونڊيو ڪرنگنگ ۽ دٻايو داخل ڪريو.
  2. Follow the on-screen prompts to start the engine.
  3. The BT301 will analyze the cranking voltage and time, providing a result on the starter's performance.

Charging System Test:

  1. مين مينيو مان، چونڊيو چتاءُ ڏيڻ ۽ دٻايو داخل ڪريو.
  2. Follow the on-screen prompts, which may include revving the engine to a specific RPM.
  3. The BT301 will measure the alternator's output and ripple voltage, indicating the charging system's health.

6.2 Using the NT630 Plus OBD2 Scanner

مين مينيو نيويگيشن:

The NT630 Plus features function buttons (F1, F2, F3) for quick access, along with directional arrows, داخل ڪريو, پوئتي، ۽ مدد buttons. Use the arrow keys to navigate and داخل ڪريو چونڊن جي تصديق ڪرڻ.

OBD2 تشخيص:

  1. مين مينيو مان، چونڊيو EOBD(F1) or EOBD(F2) (depending on the specific menu layout) and press داخل ڪريو.
  2. چونڊيو پڙهو ڪوڊس جي طرف view current, pending, and permanent diagnostic trouble codes (DTCs).
  3. چونڊيو صاف ڪوڊ to erase DTCs and turn off the Check Engine Light (MIL). Ensure the underlying issue is resolved before clearing codes.
  4. چونڊيو لائيو ڊيٽا جي طرف view real-time sensor data from the vehicle's engine control unit (ECU).
  5. چونڊيو فريز فريم جي طرف view a snapshot of sensor data recorded when an emission-related fault occurred.

ABS System Diagnostics:

  1. مين مينيو مان، چونڊيو ABS&Airbag ۽ دٻايو داخل ڪريو.
  2. چونڊيو ABS from the submenu.
  3. Choose options like پڙهو ڪوڊس, صاف ڪوڊ، يا لائيو ڊيٽا to diagnose the ABS system.
  4. لاءِ ABS Auto Bleed, select this function and follow the on-screen instructions carefully. This procedure helps remove air from the brake system after component replacement or fluid changes.
Illustration of ABS Auto Bleed process, showing a car's brake system, a mechanic adding brake fluid, and a foot pressing the brake pedal.

تصوير 6.2: Visual guide to the ABS Auto Bleed function.

SRS/Airbag System Diagnostics:

  1. مين مينيو مان، چونڊيو ABS&Airbag ۽ دٻايو داخل ڪريو.
  2. چونڊيو SRS/Airbag from the submenu.
  3. Choose options like پڙهو ڪوڊس or صاف ڪوڊ to diagnose the Supplemental Restraint System.
Screenshots showing full functions for ABS SRS/Airbag diagnostics: Read Codes, Clear Codes, Freeze Frame, Live Data, and Auto VIN.

تصوير 6.3: مٿانview of diagnostic functions available for ABS and SRS/Airbag systems.

Special Functions (NT630 Plus):

  • SAS حساب ڪتاب: چونڊيو SAS from the main menu. This function is used to reset the steering angle sensor after steering system repairs or alignment. Follow the on-screen prompts carefully.
  • Oil Service Light Reset: چونڊيو تيل ري سيٽ from the main menu. This function allows you to reset the oil service light after an oil change, ensuring the vehicle's maintenance schedule is correctly updated.
  • اي پي بي ري سيٽ: چونڊيو اي پي بي from the main menu. This function is essential when servicing components of the electronic parking brake system, such as replacing brake pads. It safely retracts and re-engages the parking brake calipers.
Illustration of three hot reset functions: SAS Calibration, Oil/Service Light Reset, and EPB Reset, with diagrams of a car's steering, engine, and electronic parking brake.

تصوير 6.4: Visual explanation of the SAS Calibration, Oil/Service Light Reset, and EPB Reset functions.

7. سار سنڀال

7.1 ڊيوائس سنڀال

  • صفائي: نرم استعمال ڪريو، ڊيamp ڊوائيس صاف ڪرڻ لاءِ ڪپڙو جasing. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو.
  • اسٽوريج: Store the devices in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • سافٽ ويئر اپڊيٽ: Periodically check the FOXWELL official website for software updates to ensure your devices have the latest vehicle coverage and functionalities. Connect the device to a computer using the provided USB cable for updates.
  • ڪيبل جي چڪاس: Regularly inspect the diagnostic cables and battery clamps for any signs of damage or wear. Replace damaged cables immediately.

8. مسئلا حل ڪرڻ

If you encounter issues while using your FOXWELL devices, refer to the table below for common problems and their solutions.

مسئلوحل
ڊوائيس تي طاقت نه آهي.For BT301: Ensure battery clamps are securely connected to the correct battery terminals. For NT630 Plus: Verify the OBDII cable is firmly connected to the vehicle's DLC and the ignition is ON. Check vehicle's fuse for the OBDII port.
NT630 Plus fails to link with vehicle.Confirm the vehicle's ignition is ON. Check if the OBDII cable is properly connected. Ensure the vehicle is OBDII compliant (most vehicles from 1996 onwards). Try connecting to a different OBDII compliant vehicle to rule out device issue.
BT301 shows 'Battery Error' or inconsistent results.Ensure battery terminals are clean and free of corrosion. Verify that the correct battery type and CCA rating were entered. Ensure a stable connection of the battery clamps.
Cannot clear DTCs with NT630 Plus.Ensure the ignition is ON and the engine is OFF. If the underlying fault is still present, the codes will reappear immediately. Address the root cause of the DTCs first.
اسڪرين منجمد آهي يا غير جوابده آهي.Disconnect the device from the vehicle/battery, wait a few seconds, and reconnect. If the issue persists, perform a software update if available.

9. وضاحتون

9.1 FOXWELL BT301 Battery Tester

  • آپريٽنگ جلدtage: 6 وي - 12 وي
  • ٽيسٽ جي حد: 100-2000 سي سي اي
  • ڏيکاريو: Backlit LCD
  • آپريٽنگ گرمي پد: 0°C کان 50°C (32°F کان 122°F)
  • اسٽوريج جي درجه حرارت: -20 ° C کان 70 ° C (-4 ° F کان 158 ° F)

9.2 FOXWELL NT630 Plus OBD2 Scanner

  • ڏيکاريو: Color TFT screen
  • آپريٽنگ جلدtage: 8V - 18V (from vehicle battery)
  • رابطي: OBDII 16-pin DLC, USB
  • آپريٽنگ گرمي پد: 0°C کان 60°C (32°F کان 140°F)
  • اسٽوريج جي درجه حرارت: -20 ° C کان 70 ° C (-4 ° F کان 158 ° F)
  • پروٽوڪول: Supports all OBDII protocols (ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4)

لاڳاپيل دستاويز - BT301, NT630 Plus

اڳيview فاڪس ويل NT630 پلس OBD2 اسڪينر FAQ ۽ مسئلا حل ڪرڻ جي گائيڊ
Foxwell NT630 Plus OBD2 تشخيصي اسڪينر لاءِ اڪثر پڇيا ويندڙ سوالن جا جواب ۽ مسئلا حل ڪرڻ جا طريقا ڳوليو، جيڪي رجسٽريشن، اپڊيٽس، عام مسئلن، ۽ آپريشنل ڪمن کي ڍڪيندا آهن.
اڳيview FOXWELL NT630 Pro ABS ۽ ايئر بيگ ري سيٽ ٽول يوزر مينوئل
This user manual provides comprehensive instructions for the FOXWELL NT630 Pro, a professional diagnostic tool designed for automotive ABS and Airbag systems. Learn how to identify vehicles, read and clear codes, view live data, and perform special functions for efficient automotive diagnostics.
اڳيview FOXWELL NT630 ايليٽ ABS ۽ ايئر بيگ ري سيٽ ٽول يوزر مينوئل | تشخيص ۽ گائيڊ
FOXWELL NT630 Elite ABS ۽ Airbag Reset Tool لاءِ جامع يوزر مينوئل جي ڳولا ڪريو. هي گائيڊ خاصيتون، سيٽ اپ، تشخيصي آپريشن، OBDII/EOBD فنڪشن، سسٽم ترتيب، سافٽ ويئر اپڊيٽ، ۽ اثرائتي گاڏين جي تشخيص لاءِ نتيجو پرنٽنگ جي تفصيل ڏئي ٿو.
اڳيview FOXWELL NT630 Pro ABS ۽ ايئر بيگ ري سيٽ ٽول يوزر مينوئل
FOXWELL NT630 Pro لاءِ جامع يوزر مينوئل، ABS ۽ ايئر بيگ سسٽم لاءِ هڪ پيشيور آٽوميٽو تشخيصي اوزار. گاڏي جي سڃاڻپ، تشخيصي آپريشن، OBDII/EOBD افعال، سسٽم سيٽ اپ، ۽ سافٽ ويئر اپڊيٽس کي ڍڪي ٿو.
اڳيview FOXWELL NT510 ملٽي سسٽم اسڪينر استعمال ڪندڙ دستياب
FOXWELL NT510 ملٽي سسٽم اسڪينر لاءِ جامع يوزر مينوئل، ان جي خاصيتن، آپريشنز، حفاظتي معلومات، ۽ آٽوميٽو تشخيص لاءِ خرابي جي حل جي تفصيل سان. گاڏي جي سڃاڻپ، سسٽم تشخيص، ٻہ طرفي ٽيسٽ، OBDII/EOBD افعال، ۽ سروس/ سار سنڀال جي طريقيڪار کي ڍڪي ٿو.
اڳيview FOXWELL NT630Plus ABS ۽ ايئر بيگ ري سيٽ ٽول يوزر مينوئل
User manual for the FOXWELL NT630Plus ABS & Airbag Reset Tool, detailing its features for automotive diagnostics, ABS/Airbag system checks, SAS calibration, and OBDII/EOBD functions. Includes safety information and setup guides from Shenzhen Foxwell Technology Co., Ltd.