1. تعارف
This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.
تصوير 1.1: مٿي کان هيٺ تائين view of the GODIYMODULES High Voltage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.
2. حفاظت جي ڄاڻ
WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltage circuits.
- Ensure the power supply is disconnected before making any connections or adjustments.
- Do not touch any components on the board when power is applied.
- Use appropriate insulation and safety equipment.
- Verify all connections are correct before applying power.
- This module is intended for experienced electronics hobbyists and professionals.
3. خاصيتون
- Designed for Nixie and Magic Eye Tube anode and filament power supply.
- Adjustable اعلي حجمtage DC output.
- Dedicated 6.3V filament voltage پيداوار.
- Compact board design.
4. وضاحتون
| پيرا ميٽر | قدر |
|---|---|
| انٽ واليمtage | ڊي سي 9V-12V |
| DC Socket Specification | 5.5*2.1 mm (Inner Positive, Outer Negative) |
| وڏي ويلtage putاھر | DC 150V-280V / 15mA (Adjustable) |
| Filament Voltage putاھر | ڊي سي 6.3V / 1500mA |
| طول و عرض | تقريبن 5.24 x 3.82 x 1.34 انچ (پيڪيج) |
| وزن | تقريبن 0.634 آونس |
| مواد | ڌاتو، پلاسٽڪ |
5. سيٽ اپ ۽ ڪنيڪشن
Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.
5.1 ان پٽ پاور ڪنيڪشن
The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:
- ڊي سي پاور جيڪ: Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
- ٽرمينل بلاڪ: Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.
Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.
Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.
5.2 آئوٽ پٽ ڪنيڪشن
The module provides two main outputs via the green screw terminal block:
- DC 150V-280V Output: هي اعلي حجم آهيtage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
- ڊي سي 6.3 وي آئوٽ پُٽ: This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
- جي ڊي: Common ground connection for both outputs.
Ensure all connections are secure and correctly polarized before applying power.
6. آپريٽنگ هدايتون
6.1 پاور آن
Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltages.
6.2 Adjusting High Voltage putاھر
اعلي حجمtage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:
- ڦرڻ ڪلاڪ جي طرف ڪندو واڌارو پيداوار جو حجمtage.
- ڦرڻ گھڙيال وارَ وار ڪندو گهٽتائي پيداوار جو حجمtage.
Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.
تصوير 6.1: مٿي view of the module, clearly showing the blue potentiometer used for adjusting the high voltage پيداوار.
7. سار سنڀال
The GODIYMODULES High Voltage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.
- ماڊيول کي صاف ۽ مٽي ۽ ملبي کان پاڪ رکو.
- Ensure adequate ventilation around the module to prevent overheating.
- ماڊيول کي نمي يا انتهائي گرمي پد جي سامهون آڻڻ کان پاسو ڪريو.
- Regularly inspect connections for looseness or corrosion.
8. مسئلا حل ڪرڻ
- ڪو به ٻاڦ وارو حجمtage:
- Verify the input power supply is connected and providing 9V-12V DC.
- Check the polarity of the input DC power plug (inner positive, outer negative).
- Ensure all output connections are secure.
- غلط آئوٽ پُٽ وولtage:
- اعلي حجم لاءtage output, adjust the potentiometer as described in Section 6.2.
- Use a multimeter to accurately measure the output voltages.
- ان پٽ حجم کي يقيني بڻايوtage مستحڪم آهي ۽ مخصوص حد اندر آهي.
- ماڊيول اوور هيٽنگ:
- Ensure adequate airflow around the module.
- Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).
9. سپورٽ
For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.
