Fanttik F2 Master Mini Cordless Rotary Tool Kit & D2 PLUS Laser Level User Manual

1. پراڊڪٽ ختمview

This manual provides instructions for the Fanttik F2 Master Mini Cordless Rotary Tool Kit and the Fanttik D2 PLUS Laser Level. These tools are designed for precision tasks and accurate leveling applications.

Image 1.1: The Fanttik F2 Master Mini Cordless Rotary Tool (left) and D2 PLUS Laser Level (right).

1.1 F2 Master Mini Cordless Rotary Tool

The F2 Master is a compact, cordless rotary tool featuring a brushless hollow cup motor for reduced noise and enhanced performance. It offers 5 adjustable speed settings for various precision tasks such as grinding, polishing, drilling, and engraving. The tool includes a Revostor Hub for organized accessory storage and a durable aluminum case with a pop-up mechanism for easy access.

1.2 D2 PLUS Laser Level

The D2 PLUS is a high-precision laser level utilizing advanced high-brightness green laser technology. It provides a projection range of up to 100 ft with an accuracy of 3/32 inches at 30 ft. It features independent or combined vertical and horizontal line projection, a wide-angle expansion for vertical lines, and a pulse mode for extended working range with an optional receiver.

2. حفاظت جي ڄاڻ

پيداوار کي نقصان ۽ زخم کان بچائڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو.

• استعمال ڪرڻ کان اڳ سڀ هدايتون پڙهو.
• Wear appropriate personal protective equipment, such as safety glasses, when operating the rotary tool.
• ڪم واري علائقي کي صاف ۽ روشن رکو.
• ڌماڪيدار ماحول ۾ بجلي جا اوزار نه هلايو، جهڙوڪ ٻرندڙ مائع، گيس، يا مٽي جي موجودگي ۾.
• پاور اوزار هلائڻ دوران ٻارن ۽ ويهندڙن کي پري رکو.
• ذخيرو اوزار ٻارن جي پهچ کان ٻاهر.

2.1 ليزر جي حفاظت

The D2 PLUS Laser Level is a Class II laser product. Observe the following precautions:

• احتياط: سڌو سنئون ليزر بيم ۾ نه ڏسو.
• جان بوجھ ڪري ليزر شعاع کي ماڻهن يا جانورن ڏانهن نه هلايو.
• Avoid exposing the eyes to direct or reflected laser beams.
• Do not modify the laser device.
• صرف استعمال ڪريو جيئن هن دستور ۾ بيان ڪيو ويو آهي.

3. پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

Image 3.1: Contents of the D2 PLUS Laser Level package.

• ڊي 2 پلس ليزر ليول
• USB-سي ڪيبل
• مقناطيسي بریکٹ
• Target Plate
• ڊرائنگ بيگ
• استعمال ڪندڙ دستي
• F2 Master Mini Cordless Rotary Tool
• F2 Master Revostor Hub with 35 accessories (3/32" / 2.3mm)
• F2-M2 Magnetic Wrench

4. F2 Master Rotary Tool - Setup & Operation

4.1 اجزاء مٿانview

• Rotary Tool Body: Main unit with motor and battery.
• ڪوليٽ: Holds the accessory bits.
• Speed Indicator Lights: Display current speed setting.
• Power/Speed Button: Controls power and speed.
• ريوسٽر هب: Magnetic stand for organizing accessories.
• Aluminum Case: Protective case with pop-up mechanism.

4.2 Charging the Rotary Tool

The F2 Master is battery-powered. Ensure it is fully charged before first use.

1. Connect the USB-C charging cable to the charging port on the rotary tool.
2. ڪيبل جي ٻئي ڇيڙي کي مناسب USB پاور اڊاپٽر سان ڳنڍيو (شامل نه آهي).
3. The indicator lights will show charging status. Once fully charged, disconnect the cable.

4.3 لوازمات سان ڳنڍڻ

The Revostor Hub provides organized storage and easy access to various accessories.

Image 4.1: The Revostor Hub for organized accessory storage.

1. Ensure the rotary tool is turned off.
2. ڪوليٽ نٽ کوليو.
3. Insert the desired accessory bit (3/32" / 2.3mm shank) into the collet.
4. Tighten the collet nut securely using the F2-M2 Magnetic Wrench to hold the bit in place. Do not overtighten.

4.4 پاور آن/آف ۽ اسپيڊ ايڊجسٽمينٽ

The F2 Master features a brushless motor for efficient and quiet operation.

Image 4.2: The F2 Master operates quietly at 32 dB when idle.

Image 4.3: The F2 Master's powerful brushless motor provides up to 25,000 RPM.

1. پاور آن ڪرڻ: Press and hold the Power/Speed button until the indicator lights illuminate. The tool will start at the lowest speed setting.
2. رفتار کي ترتيب ڏيڻ لاءِ: Briefly press the Power/Speed button to cycle through the 5 available speed settings. The indicator lights will show the selected speed.
3. پاور آف ڪرڻ: Press and hold the Power/Speed button until the indicator lights turn off.

5. D2 PLUS Laser Level - Setup & Operation

5.1 اجزاء مٿانview

• ليزر ايميٽر: Project horizontal and vertical green laser lines.
• ڪنٽرول پينل: Buttons for power, mode selection, and pulse mode.
• Pendulum Lock: Secures the pendulum for manual mode or transport.
• بيٽري جو اشارو: باقي بيٽري جي زندگي ڏيکاري ٿو.
• USB-C چارجنگ پورٽ: اندروني بيٽري کي ري چارج ڪرڻ لاءِ.

5.2 Charging the Laser Level

The D2 PLUS has a 2600 mAh rechargeable battery, providing 7-14 hours of continuous use.

Image 5.1: The D2 PLUS Laser Level features a USB-C charging port.

1. Connect the provided USB-C charging cable to the charging port on the side of the laser level.
2. ڪيبل جي ٻئي ڇيڙي کي مناسب USB پاور اڊاپٽر سان ڳنڍيو (شامل نه آهي).
3. The battery indicator lights will show charging status. Disconnect once fully charged.

5.3 پاور آن/آف ۽ موڊ جي چونڊ

The D2 PLUS uses an OSRAM green laser, which is four times brighter than traditional red lasers.

Image 5.2: The D2 PLUS utilizes a bright OSRAM green laser.

Image 5.3: The D2 PLUS offers three distinct line modes.

Image 5.4: Manual Mode (left) and Self-Leveling Mode (right) applications.

1. خود سطحي موڊ: Unlock the pendulum by sliding the pendulum lock switch to the 'unlocked' position. Press the power button to turn on the laser. The laser will self-level within 4 degrees. If the tilt exceeds 4 degrees, the laser will flash rapidly to indicate it is out of level. Press the power button to cycle through horizontal line, vertical line, or both.
2. دستي موڊ: Lock the pendulum by sliding the pendulum lock switch to the 'locked' position. Press and hold the power button for 3 seconds to turn on the laser. The laser lines can now be projected at any angle without self-leveling. Press the power button to cycle through horizontal line, vertical line, or both.
3. نبض موڊ: In self-leveling mode, briefly press the pulse mode button (often indicated by a 'P' or wave icon) to activate pulse mode. This mode extends the working range up to 200 ft when used with a compatible laser receiver (not included), especially useful in bright environments.

Image 5.5: Pulse Mode extends the working range of the D2 PLUS Laser Level.

5.4 Mounting the Laser Level

The D2 PLUS can be mounted using its integrated magnetic bracket or a tripod.

Image 5.6: The D2 PLUS offers high precision, up to ±3/32 in at 30 ft.

• مقناطيسي بریکٹ: Attach the magnetic bracket to metallic surfaces for stable positioning.
• تپائي چڙهڻ: The laser level has a standard tripod thread (1/4"-20) on its base for mounting to a tripod (not included).

6. سار سنڀال

مناسب سار سنڀال توهان جي اوزارن جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

Image 6.1: The D2 PLUS Laser Level is designed for durability against dust, water, and minor impacts.

• صفائي: نرم استعمال ڪريو، ڊيamp cloth to clean the tool surfaces. Do not use abrasive cleaners or solvents. For the laser level, gently wipe the laser windows with a clean, lint-free cloth.
• اسٽوريج: Store both tools in their original packaging or a protective case in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the pendulum lock on the laser level is engaged during storage and transport.
• بيٽري جي سنڀال: For optimal battery life, charge the tools regularly, even if not in frequent use. Avoid fully discharging the batteries for extended periods.
• چڪاس: Periodically inspect the tools for any signs of damage, loose parts, or wear. Do not operate damaged tools.

7. مسئلا حل ڪرڻ

عام مسئلن ۽ انهن جي حل لاءِ هيٺ ڏنل جدول جو حوالو ڏيو.

If you encounter issues not covered here, please contact Fanttik customer support.

8. وضاحتون

8.1 Fanttik F2 Master Mini Cordless Rotary Tool

8.2 Fanttik D2 PLUS Laser Level

9. وارنٽي ۽ سپورٽ

Fanttik products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included in your package or visit the official Fanttik webسائيٽ. سپورٽ سان رابطو ڪرڻ وقت مھرباني ڪري پنھنجو ماڊل نمبر ۽ خريداري جي تاريخ موجود رکو.

For further assistance, you may contact Fanttik customer service through their official channels.