Albott 24000 BTU Mini Split Air Conditioner Heat Pump User Manual

1. تعارف

Thank you for choosing the Albott 24000 BTU Mini Split Air Conditioner Heat Pump. This system is designed to provide all-in-one comfort control for your space, offering cooling, heating, dehumidifying, and fan modes. With its energy-efficient design and quiet operation, it ensures a comfortable environment year-round.

اهم خاصيتون:

• All-in-One Comfort Control: Experience cooling, heating, dehumidifying, and fan modes. Adjust temperatures (60°F–90°F) easily, plus a 24-hour timer and sleep mode.
• توانائي-موثر: Due to the heat pump design and SEER2 19 rating, this system delivers powerful performance while minimizing energy usage and cutting electricity costs, all without sacrificing comfort.
• Stable & Reliable Performance: Built for extreme conditions (-4°F to 140°F), this ductless mini split AC/heating system ensures year-round comfort. With 24,000BTU, it efficiently cools or heats up to 1500 sq. ft.
• Quiet & User-Friendly Operation: The DIY mini split runs quietly, creating a serene space at home or work. Simple, intuitive controls make daily use effortless and stress-free.
• خود صفائي ٽيڪنالاجي: Helps remove dust buildup with a 135℉ self-cleaning function. The air conditioner reminds you every 500 hours to activate the self-cleaning, which runs for 30 minutes.
• Easy Maintenance & Long Lifespan: Features washable filters for easy cleaning.

Image: The Albott Mini Split Air Conditioner showcasing its various features including inverter technology, silent operation, and self-cleaning capabilities.

2. حفاظت جي ڄاڻ

Please read all safety warnings and instructions carefully before installing or operating your air conditioner. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

عام حفاظتي احتياط:

• Installation must be performed by qualified personnel in accordance with all national wiring regulations.
• پڪ ڪريو ته بجلي جي فراهمي جي مقدار سان ملي ٿيtage specified on the unit's nameplate.
• Do not install the unit near heat sources, steam sources, or in areas with flammable/explosive gases or corrosive gases.
• Maintain clear space around the indoor and outdoor units to ensure proper airflow and prevent obstructions.
• Always turn off the power supply before performing any maintenance or cleaning.
• If installing the outdoor unit at a height, always wear appropriate safety gear, including a safety belt and helmet.

3. شامل اجزاء

Your Albott Mini Split Air Conditioner Heat Pump package includes the following components:

• اندروني يونٽ
• ھدايت وارو دستور
• بيٽريون
• ريموٽ ڪنٽرول
• Hanging plate on the back
• اندروني يونٽ لاءِ نيڪال جو پائپ
• تنصيب جي ماپ ڊرائنگ
• 14.76 فٽ ڪميونيڪيشن تارون
• ٻاهرين يونٽ
• ڀت جي آستين
• پوٽي
• ٽامي جو ڪنيڪشن پائپ - هوائي پائپ
• ٽامي ڪنيڪشن پائپ - مائع پائپ
• 8.2 فٽ پاور ڪيڊ
• ٽيپ

Image: A visual representation of all items included in the product package, from the main units to the smallest accessories.

4. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the optimal performance and longevity of your Albott Mini Split Air Conditioner. Please follow these steps carefully. For a visual guide, refer to the installation video provided below.

4.1. تياري

• Necessary Tools and Materials: Hole saw, multimeter, pipe cutter, hex wrenches, refrigerant, torque wrench, adjustable wrench, tape measure, safety belt, flaring tool, bracket, level, Phillips screwdriver, electroprobe, vacuum pump, pliers, copper tube.
• Check the Installation Environment: Ensure there is no heat source or steam source, no obstructions around the inlet and outlet of indoor and outdoor units, and no flammable, explosive, or corrosive gases.

4.2. اندروني يونٽ جي انسٽاليشن

• تنصيب جي جڳھ چونڊيو: The wall for the indoor unit should be hard, flat, and firm to avoid vibration and noise. Ensure adequate clearance: >15cm to ceiling, >20cm to obstacles on sides, and 230-260cm from the floor.
• Fix Mounting Plate: Put the plate on the wall and use a level to make it horizontal. Select the position of screws on the plate, no less than 5 screws. Punch holes in the wall and use expansion screw kits to firmly fix the plate to the wall. Do not use nails.
• ڊرل وال سوراخ: After determining where the pipe will go through the wall, drill holes. When drilling, avoid wires, plumbing, gas, and other sensitive components. The wall hole should be inclined outward by 5-10°, with a diameter of 60-80mm. Use an anti-dust bag to avoid dust.
• Installation of Connection Cable: Pass the power cable out from the back of the indoor unit and fix it on the terminal board. Fix the cable with a clamp.
• Knock-out Panel: According to piping direction, remove the knock-out panel with a knife, and remove burrs to prevent the drain pipe from being broken.
• Connection of Refrigerant Piping: Use both hands to turn the pipe in the desired direction. It is forbidden to operate with one hand, which will make the tube deform and rupture. Aim at the pipe center, tighten the taper nut with fingers, then tighten the taper nut with 2 wrenches. It's better to use a torque wrench to tighten the taper nut; refer to the provided torque table for required values based on pipe size.
• ڊرين هوز انسٽال ڪريو: Connect the drain hose with the water outlet pipe, and fix it firmly with adhesive tape. The length should be more than 5cm to prevent water leakage.
• Wrap the Piping: Wrap refrigerant piping, wires, and drain pipe with wrapping tape.
• ماؤنٽ انڊور يونٽ: Put the refrigerant piping out of the wall hole. Put the indoor unit on the mounting plate. Push the lower part of the indoor unit until a 'click' sound is heard to make sure the indoor unit is firmly fixed to the wall.
• Pipe Protecting Ring and Putty: To protect piping and wires, a pipe protecting ring shall be installed sealed with putty.

4.3. ٻاهرين يونٽ جي تنصیب

• تنصيب جي جڳھ چونڊيو: Outdoor unit must be installed in a firm and flat place to prevent vibration and noise. Ensure adequate clearance: >20cm to top obstruction, >30cm to side obstructions, >10cm air in side, >200cm air out side.
• Install Outdoor Unit Bracket: If installing the air conditioner in a higher place, the operator should wear a safety belt and helmet. Use a level to ensure the bracket is horizontal and vertical. Use at least 6 expansion bolts to make sure brackets are fixed firmly on the wall.
• ٻاهرين يونٽ کي درست ڪريو: Use 4 screws to fix the feet of the outdoor unit.
• ريفريجرينٽ پائپنگ ڳنڍيو: Remove the nut from stop valves. Aim at the pipe center of the stop valve, tighten the taper nut with fingers, then tighten the taper nut with 2 wrenches. It's better to use a torque wrench to tighten the taper nut; refer to the provided torque table for required values based on pipe size. Screw 2 caps.
• ويڪيومائيز: Before vacuuming, check all the nuts of the indoor and outdoor unit are tightened. Turn on handle Lo to vacuumize. Vacuumize for at least 15 minutes, make sure the value on the pressure gauge is ≤0.1MPa. Keep pressure for 3-5 minutes after vacuumizing, make sure pressure springback ≤0.05MPa. Open 1/4 liquid valve, and remove charging hose. Open all the liquid valves and gas valves. Screw all the caps and tighten up.
• ڪيبل درست ڪريو: Remove electrical box cover. Fix cables to the terminal board according to the wiring diagram on the E-parts cover. Note: Must follow the wiring diagram inside the box cover. Use a clamp to fix cables. Put electrical box cover back.

5. آپريٽنگ هدايتون

Your Albott Mini Split Air Conditioner offers multiple modes and features for personalized comfort. Use the remote control to access and adjust settings.

آپريٽنگ موڊس:

• خودڪار موڊ: Automatically selects the appropriate mode (Cool, Heat, Dry, or Fan) based on the ambient temperature.
• بهترين موڊ: Provides cooling to lower the room temperature. Adjustable from 60°F.
• گرمي موڊ: Provides heating to raise the room temperature. Adjustable up to 90°F.
• Dry (Dehumidify) Mode: ڪمري ۾ نمي کي گھٽائي ٿو.
• پکي جي موڊ گرم ڪرڻ يا ٿڌو ڪرڻ کان سواءِ هوا کي گردش ڪري ٿو.

اضافي خاصيتون:

• سمهڻ جو طريقو: Adjusts temperature and fan speed for comfortable sleep and energy saving.
• 24 ڪلاڪ ٽائمر: يونٽ کي مخصوص وقتن تي آن يا آف ڪرڻ لاءِ پروگرام ڪريو.
• 4D Auto Swing: Directs airflow exactly where needed for personalized comfort.
• گھڻن فين جي رفتار: Choose from Low, Mid, High, or Turbo fan speeds.
• خود صفائي فنڪشن: Activates a 135°F self-cleaning cycle to remove dust buildup.

Image: The remote control for the Albott Mini Split AC, detailing its 7 modes, 4 wind speeds, and other features like 24H Timer and Self-Cleaning.

Image: Demonstrates the whisper-quiet operation of the unit, ideal for peaceful spaces like bedrooms or offices, with noise levels as low as 29dB.

6. سار سنڀال

Regular maintenance ensures the efficiency and longevity of your air conditioner. Always disconnect power before performing any maintenance.

فلٽر صفائي:

• The unit features washable filters for easy removal and cleaning.
• Regularly clean the air filters to trap dust and particles, ensuring fresher air circulation and enhanced durability of internal components.

خود صفائي فنڪشن:

• The self-cleaning function operates at 135°F to eliminate dust and bacteria buildup.
• The unit will remind you every 500 hours to activate the self-cleaning cycle, which runs for 30 minutes.

Image: Illustrates the detachable dust filter, highlighting its role in trapping particles and ensuring clean air, which also prolongs the unit's lifespan.

Image: Visual explanation of the self-cleaning function, showing how 135°F heat eliminates dust and bacteria in a 30-minute automatic cycle.

7. مسئلا حل ڪرڻ

If you encounter issues with your Albott Mini Split Air Conditioner, refer to the following common problems and solutions. If the problem persists, contact customer support.

عام مسئلا:

• يونٽ چالو نه ٿيو: Check power supply, circuit breaker, and remote control batteries.
• Not cooling/heating effectively: Ensure filters are clean, windows/doors are closed, and there are no obstructions to airflow. Check temperature settings.
• غير معمولي آواز: Minor noises during operation are normal. Excessive or new noises may indicate an issue.
• پاڻي جو رسڻ: Check drain hose for kinks or blockages. Ensure proper slope of the drain hose.
• اليڪٽرڪ ليڪج: If there is electricity leakage, turn off power immediately to do further examination.

Trial Operation Checks:

• برقي حفاظت جي چڪاس: Use a multimeter to test possible leaking position of the outdoor unit shell during trial operation.
• Water Drain and Leakage Test: Remove one filter. Pour in 500ml water along the evaporator for about 20 seconds. Check if water drain can normally flow out and if any water leakage is around the indoor unit.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

The Albott 24000 BTU Mini Split Air Conditioner Heat Pump includes a 5 سالن جي ڪمپريسر وارنٽي ۽ هڪ 8 سالن جي وارنٽي حصن توهان جي ذهني سڪون لاءِ.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Albott customer support. Refer to your product packaging or the official Albott webرابطي جي معلومات لاء سائيٽ.