DIGITEN THT1032 ٽائمر استعمال ڪندڙ دستي سان گڏ درجه حرارت ۽ نمي ڪنٽرولر

1. تعارف

The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.

2. اهم خاصيتون

• پلگ ۽ پلي آپريشن: Simple setup with intuitive buttons for quick configuration.
• Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
• Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
• وڏي LCD ڊسپلي: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
• Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.

3. پيڪيج مواد

• DIGITEN THT1032 Controller Unit
• درجه حرارت جي جاچ
• نمي جي جاچ
• استعمال ڪندڙ دستي

4. پراڊڪٽ ختمview

The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.

تصوير 1: سامهون view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.

4.1. ڪنٽرول پينل ۽ ڊسپلي

The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).

تصوير 2: تفصيلي view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.

• سيٽ بٽڻ: Used to select an outlet for configuration or confirm settings.
• موڊ بٽڻ: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
• Up (▲) Button: Increases values or navigates menu options.
• Down (▼) Button: Decreases values or navigates menu options.
• آئوٽ 1: Temperature controlled outlet.
• آئوٽ 2: Humidity controlled outlet.
• آئوٽ 3: Timer controlled outlet.

4.2. جاچ

The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.

Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.

5. شروعاتي سيٽ اپ

1. ڳنڍو جاچ: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
2. لڳائڻ: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
3. پاور آن: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
4. ڪنيڪٽ ڊوائيسز: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.

6. آپريٽنگ هدايتون

6.1. Setting Temperature Control (OUT1)

1. کي دٻايو سيٽ button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
2. استعمال ڪريو مٿي (▲) or هيٺ (▼) گهربل هدف جي درجه حرارت کي ترتيب ڏيڻ لاءِ بٽڻ.
3. دٻايو موڊ to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
4. دٻايو سيٽ to confirm the temperature and mode.
5. To set the temperature differential (hysteresis), press and hold سيٽ for a few seconds when OUT1 is selected. Use مٿي / هيٺ to adjust the difference between the set point and when the device turns on/off. Press سيٽ تصديق ڪرڻ.

6.2. Setting Humidity Control (OUT2)

1. کي دٻايو سيٽ button repeatedly until OUT2 is selected.
2. استعمال ڪريو مٿي (▲) or هيٺ (▼) buttons to adjust the desired target humidity percentage.
3. دٻايو موڊ to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
4. دٻايو سيٽ to confirm the humidity and mode.
5. To set the humidity differential, press and hold سيٽ for a few seconds when OUT2 is selected. Use مٿي / هيٺ to adjust. Press سيٽ تصديق ڪرڻ.

6.3. Setting Timer Control (OUT3)

1. کي دٻايو سيٽ button repeatedly until OUT3 is selected.
2. دٻايو موڊ to enter the timer programming interface.
3. استعمال ڪريو مٿي (▲) or هيٺ (▼) to set the ON time (hour and minute). Press سيٽ ايندڙ سيٽنگ ڏانهن منتقل ڪرڻ لاء.
4. Set the OFF time (hour and minute) using مٿي / هيٺ ۽ سيٽ.
5. The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
6. دٻايو سيٽ to save and exit the timer settings.

6.4. گرمي پد يونٽن کي تبديل ڪرڻ (°C/°F)

To switch between Celsius and Fahrenheit, press and hold the مٿي (▲) button for approximately 3 seconds. The display will change accordingly.

7. سار سنڀال

• صفائي: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• تحقيق جي سنڀال: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
• اسٽوريج: When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.

8. مسئلا حل ڪرڻ

9. ٽيڪنيڪل وضاحتون

10. وارنٽي ۽ ڪسٽمر سپورٽ

DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webرابطي جي معلومات لاء سائيٽ.

مھرباني ڪري وارنٽي سروس لاءِ خريداري جو ثبوت رکو.