Dyeetic 6000A Portable Car Jump Starter and Power Bank User Manual

1. تعارف

Thank you for choosing the Dyeetic 6000A Portable Car Jump Starter. This device is designed to provide reliable power for jump-starting 12V vehicles, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. حفاظتي احتياط

Always observe the following safety guidelines to prevent injury or damage to the device and your vehicle:

• Read all instructions carefully before using the jump starter.
• صحيح پولارٽي ڪنيڪشن کي يقيني بڻايو (ڳاڙهو ڪلوamp مثبت ڏانهن، ڪارو clamp to negative) to avoid sparks or damage.
• Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter (All Gas and 10.0L Diesel).
• Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
• ڊوائيس کي ٻارن کان پري رکو.
• ڊوائيس کي انتهائي گرمي پد، سڌي سج جي روشني، يا پاڻي جي سامهون نه رکو.
• Ensure the device has at least 50% battery charge before use for optimal performance.
• The device features 10-in-1 smart protection, including over-current, reverse polarity, short-circuit, and over-voltagاي تحفظ.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• Dyeetic 6000A Portable Car Jump Starter
• Smart Jumper Cables with Force Start button
• USB-C چارجنگ ڪيبل
• استعمال ڪندڙ دستي
• Durable EVA Carrying Case

4. پراڊڪٽ ختمview

The Dyeetic 6000A Jump Starter is a versatile device with multiple functionalities:

• طاقتور جمپ اسٽارٽر: Delivers 6000A peak current to start 12V vehicles, including all gas and up to 10.0L diesel engines.
• پورٽبل پاور بئنڪ: Equipped with a 26800mAh battery and dual USB ports (including Quick Charge 3.0) for charging phones, tablets, and other devices.
• ايمرجنسي ٽارچ: Features a built-in 600-lumen LED light with Flashlight, SOS, and Strobe modes.
• اعليٰ حفاظت: Incorporates 10-in-1 smart protection for safe operation.
• ڊگھو اسٽينڊ بائي وقت: Can hold its charge for up to 24 months.

5. Setup: Initial Charging

Before first use, fully charge your Dyeetic 6000A Jump Starter. Use the provided USB-C charging cable and connect it to a compatible USB wall adapter (not included). The digital display will show the charging progress. A full charge is indicated when the display shows 100%.

6. آپريٽنگ هدايتون

6.1. پنهنجي گاڏي شروع ڪريو

1. جمپر ڪيبل ڳنڍيو: Insert the blue plug of the smart jumper cables into the jump starter's EC5 port. Ensure a secure connection.
2. ڳنڍيو Clamps کان بيٽري تائين: Connectنيو positiveاڙھو مثبت (+) ڪلamp to the positive terminal of your vehicle's battery. Connect the black negative (-) clamp توهان جي گاڏي جي بيٽري جي منفي ٽرمينل ڏانهن.
3. اشارو روشني چيڪ ڪريو: The indicator light on the smart jumper cable will turn solid green if the connection is correct. If it shows red or flashes, check your connections for proper polarity. If no light, press the 'BOOST' button on the smart cable for 3 seconds to enter forced start mode (use with caution).
4. گاڏي شروع ڪريو: Once the green light is solid, start your vehicle's engine within 45 seconds. If the engine does not start, wait at least 1 minute before attempting again. Do not crank for more than 3 seconds per attempt.
5. Cl هٽايوamps: After the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect them from the jump starter.

Video: How to Jump Start a Car with NEXPOW Jump Starter

Video 1: This video demonstrates the step-by-step process of using a portable jump starter to start a vehicle, including connecting the clamps and initiating the start sequence.

6.2. پورٽيبل پاور بينڪ طور استعمال ڪرڻ

The Dyeetic 6000A can charge various electronic devices:

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-A 5V/9V/12V QC3.0 or USB-A 5V/2.4A).
• جمپ اسٽارٽر خودڪار طريقي سان توهان جي ڊوائيس کي چارج ڪرڻ شروع ڪندو.
• ڊجيٽل ڊسپلي ڏيکاريندو باقي بيٽري جو سيڪڙوtagجمپ اسٽارٽر جو e.

6.3. Operating the LED Emergency Flashlight

The built-in 600-lumen LED flashlight has three modes:

1. ٽارچ موڊ: ٽارچ آن ڪرڻ لاءِ پاور بٽڻ کي 3 سيڪنڊن لاءِ دٻايو ۽ رکو.
2. SOS موڊ: With the flashlight on, press the power button once to switch to SOS signal mode.
3. اسٽروب موڊ: Press the power button again to activate the strobe light mode.
4. بند ڪريو: Press the power button a third time to turn off the flashlight.

7. سار سنڀال

To ensure the longevity and performance of your jump starter:

• باقاعده چارج ڪريو: بيٽري جي صحت کي برقرار رکڻ لاءِ، هر 3-6 مهينن ۾ ڊوائيس کي ري چارج ڪريو، جيتوڻيڪ استعمال ۾ نه هجي.
• اسٽوريج: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The EVA carrying case provides excellent protection.
• صفائي: ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. سخت ڪيميڪل يا رگڙيندڙ مواد استعمال نه ڪريو.
• ڪيبل جي سنڀال: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

The Dyeetic 6000A Portable Car Jump Starter comes with a 36-month hassle-free return policy and lifetime technical support. For any questions, concerns, or technical assistance, please contact our dedicated customer service team. Refer to the contact information provided in your product packaging or visit the official Dyeetic webحمايت لاء سائيٽ.