ANENG AT619 Voice Broadcast Multimeter Clamp ميٽر استعمال ڪندڙ دستياب

1. تعارف

This user manual provides essential information for the safe and efficient operation of your ANENG AT619 Voice Broadcast Multimeter Clamp Meter. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed for measuring AC/DC voltage, AC/DC current (via clamp), resistance, capacitance, frequency, temperature, and for continuity and diode tests, featuring a voice broadcast function for readings.

1.1 حفاظتي ڄاڻ

Always adhere to the following safety precautions to prevent personal injury or damage to the meter:

• هر ماپ جي حد لاءِ بيان ڪيل وڌ ۾ وڌ ان پٽ قدرن کان وڌيڪ نه ڪريو.
• وول سان ڪم ڪرڻ وقت انتهائي احتياط ڪيوtag30V AC RMS، 42V چوٽي، يا 60V DC کان مٿي. اهي جلدtagاهو هڪ جھٽڪو جو خطرو آهي.
• Ensure the test leads are in good condition and properly seated before making any measurements.
• جيڪڏهن ميٽر خراب نظر اچي يا ڪيس کليل هجي ته ان کي استعمال نه ڪريو.
• هميشه سرڪٽ پاور بند ڪريو ۽ سڀ هاءِ وولٽ ڊسچارج ڪريوtagمزاحمت، تسلسل، ڊائيوڊ، يا ڪيپيسيٽينس کي ماپڻ کان اڳ ڪيپيسٽر.
• Use the correct function and range for each measurement.
• سڀني مقامي ۽ قومي حفاظتي ضابطن جو مشاهدو ڪريو.

2. مصنوعات جون خاصيتون

The ANENG AT619 Multimeter Clamp Meter offers a range of functionalities for electrical testing:

• Voice Broadcast Function: Announces measurement readings for convenience.
• Multi-functional Measurement: Capable of measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature.
• غير رابطي وارو جلدtage (NCV) جي چڪاس: For identifying live wires without direct contact.
• Clamp Meter Design: Allows for non-invasive current measurement.
• Continuity and Diode Test: Essential for circuit diagnostics.
• وڏي LCD ڊسپلي: Clear digital readout with 4000 counts.
• Data Hold and Relative Measurement (REL): For convenient data analysis.
• Automatic Range Selection: Simplifies operation by automatically selecting the appropriate measurement range.

3. جزا ۽ ڪنٽرول

Figure 1: ANENG AT619 Voice Broadcast Multimeter Clamp Meter. This image displays the front view of the ANENG AT619 clamp meter, highlighting its red clamp jaws, rotary dial, LCD screen, function buttons, and input terminals.

Familiarize yourself with the following components:

• Clamp جبڙا: Used for non-contact AC/DC current measurement.
• روٽري ڊائل: Selects the desired measurement function (e.g., V, A, Ω, Hz, NCV, OFF).
• LCD ڊسپلي: Shows measurement readings, units, and function indicators (e.g., AUTO, AC, DC, MAX/MIN).
• فنڪشن بٽڻ:
  • H/∗ (Hold/Backlight): Freezes the current reading on the display. Long press for backlight.
  • REL (Relative): Measures the difference between a stored value and the current reading.
  • سيٽ: Used for selecting sub-functions within a rotary dial position (e.g., AC/DC, Diode/Continuity).
• ان پٽ ٽرمينلز:
  • COM (عام): Negative input terminal for all measurements.
  • VΩHz: vol. لاءِ مثبت ان پٽ ٽرمينلtagاي، مزاحمت، فريڪوئنسي، ڪيپيسيٽينس، ڊاءِوڊ، ۽ تسلسل جي ماپ.
  • °C°F: Input for temperature probe.
• اين سي وي سينسر: Located near the top of the meter for non-contact voltage سectionاڻڻ.

4. سيٽ اپ

Before first use, ensure the battery is correctly installed and the test leads are ready.

4.1 بيٽري لڳائڻ

The ANENG AT619 typically uses AAA batteries. Locate the battery compartment on the back of the device, open it, insert the batteries according to the polarity indicators, and securely close the compartment.

4.2 ٽيسٽ ليڊز کي ڳنڍڻ

گھڻن ماپن لاءِ (جلدtage, resistance, continuity, diode, capacitance, frequency), insert the black test lead into the COM ٽرمينل ۽ ريڊ ٽيسٽ ليڊ ۾ VΩHz terminal. For temperature measurements, connect the temperature probe to the designated terminals.

5. آپريٽنگ هدايتون

Always select the correct function before making a measurement.

5.1 پاور آن/آف

Turn the rotary dial from the "OFF" position to any desired measurement function to power on the meter. To power off, turn the dial back to "OFF".

5.2 AC/DC Voltagاي ماپ (V)

1. Set the rotary dial to the "V" position. The meter will typically auto-detect AC or DC. Use the "SET" button if manual selection is needed.
2. Connect the test leads in parallel to the circuit or component being measured.
3. جلد پڙهوtagاي قدر LCD ڊسپلي تي.

5.3 AC/DC Current Measurement (A) - Clamp فنڪشن

1. Set the rotary dial to the "A" position. Use the "SET" button to select AC or DC current.
2. cl کوليوamp jaws and enclose only one conductor of the circuit. Ensure the jaws are fully closed.
3. LCD ڊسپلي تي موجوده قدر پڙهو.

5.4 Resistance Measurement (Ω)

1. Set the rotary dial to the "Ω" position.
2. Ensure the circuit is de-energized and all capacitors are discharged.
3. ماپڻ لاءِ جزو جي پار ٽيسٽ ليڊز کي ڳنڍيو.
4. Read the resistance value.

5.5 لڳاتار ٽيسٽ

1. Set the rotary dial to the "Ω" position and press "SET" until the continuity symbol (speaker icon) is displayed.
2. پڪ ڪريو ته سرڪٽ ڊي-انرجائيز ٿيل آهي.
3. Connect the test leads across the circuit or component. A continuous beep indicates continuity (low resistance).

5.6 غير رابطي واري جلدtage (NCV) جي چڪاس

1. Set the rotary dial to the "NCV" position.
2. Move the NCV sensor near the conductor or outlet. The meter will indicate the presence of AC voltage هڪ ٻڌڻ واري بيپ ۽/يا بصري اشاري سان.

5.7 وائيس براڊڪاسٽ فنڪشن

The ANENG AT619 automatically broadcasts the measured value after a stable reading is obtained. Ensure the meter's speaker is not obstructed for clear audio output.

6. سار سنڀال

6.1 صفائي

Wipe the meter's case with a damp ڪپڙو ۽ هلڪو صابڻ. رگڙيندڙ يا محلول استعمال نه ڪريو. استعمال کان اڳ پڪ ڪريو ته ميٽر مڪمل طور تي سڪي ويو آهي.

6.2 بيٽري مٽائڻ

When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Refer to section 4.1 for battery installation instructions.

6.3 فيوز مٽائڻ

The ANENG AT619 may contain internal fuses for protection. If a fuse blows, it must be replaced with a fuse of the same type and rating. Refer to the specifications for fuse details. Fuse replacement should only be performed by qualified personnel.

7. مسئلا حل ڪرڻ

• ميٽر آن نٿو ٿئي: بيٽري جي انسٽاليشن ۽ چارج ليول چيڪ ڪريو. جيڪڏهن ضروري هجي ته بيٽريون تبديل ڪريو.
• No reading or "OL" (Overload) displayed:
  • Ensure test leads are properly connected and making good contact.
  • Verify the correct function and range are selected.
  • مزاحمت/ تسلسل لاءِ، پڪ ڪريو ته سرڪٽ ڊي-انرجائيز ٿيل آهي.
• غلط پڙهڻ:
  • بيٽري جي سطح چيڪ ڪريو.
  • Ensure test leads are not damaged.
  • Verify the meter is not exposed to strong electromagnetic fields.
• وائيس براڊڪاسٽ ڪم نه ڪري رهيو آهي: Check if the speaker is obstructed or if the volume setting (if available) is too low.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات ۽ ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري پنھنجي خريداري سان گڏ ڏنل دستاويز ڏسو يا پرچون ڪندڙ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.