Bitmain Antminer APW11 Hydro Power Supply User Manual

1. تعارف

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of the Bitmain Antminer APW11 Hydro Power Supply, model APW111721C. This power supply unit is designed for use with Bitmain Antminer hydro-cooled mining systems, including the S19hyd 198T, S21 hyd 335T, and S21 XPhyd 473T models. Please read this manual thoroughly before installation and use.

2. حفاظت جي ڄاڻ

• برقي خطرو: Ensure all power connections are secure and correctly rated. Disconnect power before performing any maintenance or installation.
• پاڻي ٿڌو ڪرڻ جو نظام: This power supply is designed for hydro-cooling. Ensure the liquid cooling system is properly installed and free of leaks before operation.
• وينٽيليشن: Although hydro-cooled, ensure adequate airflow around the unit to prevent overheating of other components.
• پيشه ورانه تنصيب: Installation should be performed by qualified personnel familiar with high-power electrical and liquid cooling systems.
• آپريٽنگ ماحول: Operate the unit within specified temperature and humidity ranges to ensure longevity and performance.

3. پيڪيج مواد

پيڪنگ کولڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.

• Bitmain Antminer APW11 Hydro Power Supply (APW111721C)
• Associated power cables (if included with purchase)
• Mounting hardware (if included with purchase)

Figure 3.1: Three APW11 Hydro Power Supplies in their packaging, showing the units ready for installation.

4. وضاحتون

5. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the performance and safety of your APW11 Hydro Power Supply. Follow these steps carefully:

1. چڙهڻ: Securely mount the APW11 power supply in a stable location, ensuring it is compatible with your Antminer hydro-cooling system's chassis.
2. Liquid Cooling Connection: Connect the liquid cooling lines to the designated ports on the power supply. Ensure all connections are tight and leak-free. Refer to your Antminer's manual for specific liquid cooling system setup.
3. پاور ان پٽ ڪنيڪشن: Connect the appropriate high-voltage power input cable to the power supply. Ensure the power source meets the unit's voltage ۽ موجوده گهرجن.
4. Power Output Connection: Connect the power output cables from the APW11 to your Antminer mining rig. Verify all connections are correct and secure.
5. سسٽم انٽيگريشن: Integrate the power supply with the overall mining system, ensuring all data and control cables (if any) are connected.
6. بجلي کان اڳ جي چڪاس: Before applying power, double-check all connections, especially liquid cooling lines for leaks and electrical connections for proper seating.

شڪل 5.1: مٿي view of the APW11 Hydro Power Supply, highlighting the liquid cooling ports and power input connector. This view ڪنيڪشن پوائنٽس کي سمجهڻ لاءِ اهم آهي.

شڪل 5.2: تفصيلي view of the APW11 Hydro Power Supply's connection panel, displaying the model number (APW111721C) and a warning label, indicating critical connection points and safety information.

6. آپريشن

Once installed, operating the APW11 Hydro Power Supply is straightforward, as it integrates with your Antminer system.

1. پاور آن: After verifying all connections, apply power to the system. The power supply will initiate and provide power to the connected Antminer.
2. نگراني: Monitor the power supply's status through your Antminer's management interface. Ensure stable voltage and current delivery.
3. عام آپريشن: The APW11 is designed for continuous operation in a hydro-cooled environment.
4. بجلي بند: To shut down the system, follow the proper shutdown procedure for your Antminer, then disconnect the main power to the APW11.

7. سار سنڀال

باقاعده سار سنڀال توهان جي بجلي جي فراهمي جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

• Liquid Cooling System Check: Periodically inspect the liquid cooling lines and connections for any signs of leaks or blockages. Ensure the coolant level is adequate.
• مٽي هٽائڻ: While hydro-cooled, dust can still accumulate on external surfaces. Gently clean the exterior of the power supply with a soft, dry cloth. يونٽ نه کوليو.
• ڪنيڪشن جي سالميت: Annually, or as needed, check all electrical and liquid cooling connections to ensure they remain secure.
• ماحولياتي نگراني: پڪ ڪريو ته آپريٽنگ ماحول مخصوص درجه حرارت ۽ نمي جي حدن اندر رهي.

8. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with the APW11 Hydro Power Supply.

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Bitmain website or contact your authorized reseller. Keep your purchase receipt and product serial number (found on the unit's label) for warranty claims.

ٺاهيندڙ: بٽ مين

ماڊل: APW111721C