BRITA P1000 3-Way Integrated Water Filtration System

تعارف

The BRITA P1000 3-Way Integrated Water Filtration System offers a convenient and sustainable solution for accessing filtered, cold, and hot water directly from a single tap. This system features high-quality BRITA filtration, capable of processing up to 1,200 liters, effectively reducing chlorine, limescale, and other impurities to enhance water taste and protect your appliances. Its premium stainless steel design provides both functionality and an elegant aesthetic for any modern kitchen.

Image: The BRITA P1000 3-Way Integrated Water Filtration System, showcasing the sleek stainless steel tap and the compact P1000 filter unit.

حفاظت جي ڄاڻ

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.

• ڪنهن به انسٽاليشن يا سار سنڀال شروع ڪرڻ کان اڳ هميشه مکيه پاڻي جي فراهمي کي بند ڪريو.
• Ensure all connections are tight to prevent leaks. Check for leaks periodically after installation.
• This system is designed for use with high-pressure boilers (2-8.6 bar). Do not use with low-pressure systems.
• پاڻي سان استعمال نه ڪريو جيڪو مائڪرو بائيوولوجيڪل طور تي غير محفوظ هجي يا اڻڄاتل معيار جي بغير سسٽم کان اڳ يا بعد ۾ مناسب ڊس انفڪشن کان سواء.
• Keep the filter unit away from direct heat sources and freezing temperatures.
• Only use genuine BRITA replacement filters to ensure optimal performance and safety.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• BRITA 3-Way Tap (Square Style, Stainless Steel)
• BRITA P1000 Filter Cartridge
• Filter Head with Smart Filter Change Indicator (LED)
• Mounting Accessories (hoses, connectors, seals, etc.)

Image: A selection of tools and components typically included or required for the installation of the BRITA 3-Way Integrated Water Filtration System.

سيٽ اپ ۽ تنصيب

The BRITA P1000 3-Way Integrated Water Filtration System is designed for easy installation under the sink, fitting most kitchens without the need for countertop drilling or electrical connection. Follow these steps for a successful setup:

1. انسٽاليشن ايريا تيار ڪريو: Ensure you have sufficient space under your sink. The system requires a mounting hole of ø 35 mm and a minimum distance of 60 mm to the rear wall.
2. پاڻي جي فراهمي بند ڪريو: Locate and turn off the main water supply to your kitchen sink.
3. ٽيپ لڳايو: Insert the 3-way tap into the designated hole on your countertop. Secure it from underneath using the provided mounting accessories.
4. پاڻي جي نلين کي ڳنڍيو: Connect the hot and cold water supply lines to the corresponding inlets on the tap. Connect the filtered water line from the tap to the filter head.
5. Install the Filter Head: Secure the filter head to the cabinet wall under the sink. Ensure it is easily accessible for filter changes.
6. Insert the P1000 Filter: Insert the BRITA P1000 filter cartridge into the filter head.
7. Turn On Water Supply & Flush: Slowly turn the main water supply back on. Open the filtered water tap and let the water run for at least 3 minutes to flush the system and remove any air or carbon fines. Check all connections for leaks.

بصري گائيڊ لاءِ، مھرباني ڪري ھيٺ ڏنل انسٽاليشن وڊيو ڏسو:

Visual aids for installation:

Image: An illustration showing the BRITA P1000 filter unit installed neatly under a kitchen sink, connected to the tap and water supply lines.

Image: A diagram illustrating the connection points of the BRITA filter head and cartridge to the water supply and the 3-way tap under the sink.

Image: A technical drawing showing the dimensions of the BRITA 3-Way Tap, including height, width, base ring diameter, and mounting hole size, crucial for planning installation.

آپريٽنگ هدايتون

Your BRITA 3-Way Integrated Water Filtration System provides three types of water: filtered, cold, and hot. The tap features separate levers or controls for each function.

• فلٽر ٿيل پاڻي: Use the dedicated lever (often marked or with a blue indicator) to dispense filtered water.
• Cold & Hot Water: Use the standard mixer lever to dispense unfiltered cold or hot water, just like a conventional kitchen tap.
• Smart Filter Change Indicator: The filter head includes an LED indicator that signals when it's time to replace the filter cartridge. Refer to the maintenance section for details on interpreting the indicator.

Image: The BRITA 3-Way Tap demonstrating the simultaneous dispensing of filtered water from one spout and unfiltered cold/hot water from another, highlighting its versatility.

تصوير: هڪ ويجهو تصوير view of the BRITA tap's smart filter change indicator, showing the LED light that signals filter status.

سار سنڀال

Regular maintenance ensures optimal performance and longevity of your BRITA P1000 system.

فلٽر ڪارٽريج متبادل

The BRITA P1000 filter cartridge should be replaced periodically, typically every 6-12 months, or when the smart filter change indicator signals. The indicator light will change color (e.g., green to yellow to red) to prompt replacement.

1. Turn off the water supply to the filter unit.
2. پراڻي فلٽر ڪارٽريج کي فلٽر هيڊ مان ڪڍڻ لاءِ گھڙيءَ جي مخالف طرف موڙيو.
3. Insert the new BRITA P1000 filter cartridge into the filter head and twist clockwise until it clicks into place.
4. Turn the water supply back on and flush the new filter for 3 minutes.
5. Reset the smart filter change indicator according to its specific instructions (usually by pressing and holding a button).

صفائي

Clean the exterior of the tap and filter unit regularly with a soft, damp ڪپڙو ۽ هلڪو صابڻ. گھڙڻ وارا صاف ڪندڙ يا محلولن کان پاسو ڪريو جيڪي ختم کي نقصان پهچائي سگھن ٿا.

مشڪلاتون

If you encounter any issues with your BRITA P1000 system, refer to the table below for common problems and solutions:

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the documentation included with your product or visit the official BRITA webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

توھان پڻ دورو ڪري سگھو ٿا BRITA Store on Amazon وڌيڪ شين ۽ معلومات لاءِ.