ALTO TS108C 600W Powered Column Array PA Speaker System User Manual

تعارف

The ALTO TS108C is a compact, all-in-one column array PA speaker system designed for clear, room-filling sound. This system integrates an elevated line array, a built-in subwoofer, a three-channel digital mixer with reverb, and Bluetooth streaming capabilities. It is suitable for solo musicians, event DJs, and various venues requiring high-performance audio in a portable format.

Image: The ALTO TS108C speaker system, consisting of the subwoofer base, column array, and a branded carrying bag for the column components.

پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

• TS108C Base Subwoofer
• 3x Columnar Array Attachments
• Shoulder Column Carry Bag
• 1.5M (4.9 ft.) Power Cable
• جلدي بازياب گائيڊ
• حفاظت ۽ وارنٽي دستياب

سيٽ اپ جون هدايتون

1. اسيمبلي

1. Place the TS108C Base Subwoofer on a stable, flat surface.
2. Carefully connect the three columnar array attachments to form the full column. Ensure each section clicks securely into place.
3. Insert the assembled column array into the designated slot on top of the subwoofer base.

2. پاور ڪنيڪشن

• Connect the provided power cable to the AC input on the rear panel of the subwoofer.
• پاور ڪيبل جي ٻئي ڇيڙي کي گرائونڊ ٿيل اليڪٽريڪل آئوٽليٽ ۾ لڳايو.
• حجم کي يقيني بڻايو وڃيtage selector switch (if present) is set to the correct voltage for your region (e.g., 115V or 230V).

3. شروعاتي ڪنيڪشن

The TS108C features a 3-channel digital mixer. Refer to the rear panel diagram for input locations.

Image: Close-up of the TS108C rear panel, highlighting the input channels (Ch 1, Ch 2) with XLR/TRS combo jacks, BT/AUX input, and MIX OUTPUT XLR connector.

• چينل 1 ۽ 2: Use XLR or 1/4" TRS cables to connect microphones, instruments, or line-level devices.
• BT/AUX: For Bluetooth audio streaming or connecting external devices via a 1/8" (3.5mm) auxiliary cable.
• ملائي پيداوار: Use an XLR cable to link to another TS108C unit or an external PA system.

آپريٽنگ هدايتون

1. پاورنگ آن

After all connections are made, press the power switch located on the rear panel to turn on the unit. The power indicator light will illuminate.

2. مکسر ڪنٽرول

Each input channel (Ch 1, Ch 2) features:

• نوبت حاصل ڪرڻ: Adjusts the input level for the connected device. Start with the gain low and gradually increase.
• ريورب ڪوب: Controls the amount of reverb effect applied to the channel.
• EQ Knobs (High/Low): Adjusts the treble and bass frequencies for tone shaping.
• ڪلپ لائيٽ: Indicates when the input signal is too high. Reduce the gain if this LED illuminates consistently.

3. بلوٽوٽ جوئر

Image: A smartphone screen showing a music player interface, with a Bluetooth symbol indicating a wireless connection to the ALTO TS108C speaker system.

1. کي دٻايو جوڙو button on the rear panel of the TS108C. The Bluetooth indicator will flash.
2. پنهنجي بلوٽوٿ-فعال ڊوائيس (اسمارٽ فون، ٽيبليٽ، وغيره) تي، بلوٽوٿ سيٽنگز ڏانهن وڃو.
3. Select "ALTO TS108C" from the list of available devices.
4. Once paired, the Bluetooth indicator on the TS108C will glow solid.
5. Adjust the BT/AUX gain knob to control the volume of the Bluetooth audio.

4. DSP Speaker Modes

The TS108C offers four application-specific DSP modes to optimize sound for different scenarios:

• عام: Standard flat frequency response.
• زندهه: Optimized for live music performances.
• ڊي جي: Enhanced bass and treble for DJ applications.
• حسب ضرورت: Allows for user-defined EQ settings via the Alto Pro App.

Select the desired mode using the dedicated button on the rear panel or through the Alto Pro App.

5. Alto Pro App Control

Image: Two smartphones displaying the Alto Pro App, illustrating the user interface for wireless control over mixer settings, EQ, and speaker modes.

The Alto Pro App (available for iOS and Android) provides wireless control over the TS108C's mixer and speaker functions. This includes:

• Changing DSP Speaker Use modes.
• EQ سيٽنگز کي ترتيب ڏيڻ.
• Adjusting volume and EQ for each channel.
• ۽ وڌيڪ.

Download the app from your device's app store and connect via Bluetooth for full control.

سار سنڀال

1. صفائي

• صفائي ڪرڻ کان اڳ هميشه پاور ڪيبل کي ڊسڪنيڪٽ ڪريو.
• ٻاهرين سطحن کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو.
• گھڙڻ وارا صاف ڪندڙ، محلول، يا موم استعمال ڪرڻ کان پاسو ڪريو، ڇاڪاڻ ته اهي ختم کي نقصان پهچائي سگهن ٿا.
• For grilles, use a soft brush or vacuum cleaner with a brush attachment to remove dust.

2. اسٽوريج ۽ ٽرانسپورٽ

Image: A person carefully disassembling the column array sections and placing them into the provided carrying bag, demonstrating the portability of the system.

• When not in use, store the TS108C in a cool, dry environment, away from direct sunlight and extreme temperatures.
• For transport, disassemble the column array and store it in the provided carrying bag.
• The subwoofer features a built-in handle for easy lifting and carrying.
• Protect the unit from impacts and excessive vibrations during transport.

مشڪلاتون

وضاحتون

وارنٽي ڄاڻ

The ALTO TS108C is covered by a محدود وارنٽي. For specific terms, conditions, and duration of the warranty, please refer to the included Safety & Warranty Manual or visit the official ALTO webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

حمايت

For further assistance, technical support, or to download the latest version of the Alto Pro App, please visit the official ALTO Professional webسائيٽ:

www.altoproaudio.com

You may also contact ALTO customer service directly for support inquiries.

نوٽ: هن دستور ۾ شامل ڪرڻ لاءِ پراڊڪٽ ڊيٽا ۾ ڪا به سرڪاري پراڊڪٽ وڊيوز مهيا نه ڪئي وئي هئي.