1. تعارف
The FLSUN S1 Pro is an advanced FDM Delta 3D printer designed for high-speed and high-precision additive manufacturing. It features an ultra-fast printing speed of up to 1200mm/s and an acceleration of 40,000mm/s², significantly reducing print times. Equipped with Klipper firmware, a 7-inch smart touch screen, and a 350℃ all-metal hotend, the S1 Pro supports a wide range of filaments, including high-performance engineering materials. Its large build volume of Φ320*320*430 mm³ accommodates substantial projects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FLSUN S1 Pro 3D Printer.
تصوير 1.1: سامهون view of the FLSUN S1 Pro 3D Printer, showcasing its sleek design and enclosed build chamber.
2. دٻي ۾ ڇا آهي
پيڪنگ ڪرڻ تي، مھرباني ڪري تصديق ڪريو ته سڀئي جزا موجود آھن:
- FLSUN S1 Pro 3D Printer (main unit)
- Filament Dryer Box
- پاور ڪيبل
- USB ڪيبل
- Tool Kit (various wrenches, screwdrivers, etc.)
- Sampفيلامينٽ
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
- تڪڙو شروع ھدايت
Image 2.1: The FLSUN S1 Pro 3D Printer and its included accessories, demonstrating its 95% pre-assembled state.
3. سيٽ اپ جون هدايتون
The FLSUN S1 Pro is designed for quick setup, being 95% pre-assembled. The initial setup typically takes less than 10 minutes.
- پيڪنگ کولڻ: احتياط سان پرنٽر ۽ سڀني لوازمات کي پيڪنگ مان هٽايو.
- لڳائڻ: Place the printer on a stable, level surface in a well-ventilated area.
- اسيمبلي: Install the door and glass panels as per the instructions in the detailed انسٽاليشن مينوئل (PDF).
- پاور ڪنيڪشن: پاور ڪيبل کي پرنٽر ۽ هڪ مناسب پاور آئوٽليٽ سان ڳنڍيو.
- شروعاتي پاور آن: Turn on the printer using the main power switch. The device will perform self-checks to ensure stability.
- خودڪار ليولنگ: The printer features automatic leveling. Follow the on-screen prompts on the 7-inch touch screen to initiate and complete the leveling process. This ensures optimal print bed calibration.
- فلامنٽ لوڊ ڪندي: Load your desired filament into the filament dryer box and then guide it into the extruder as instructed on the display.
- نيٽ ورڪ ڪنيڪشن: Connect the printer to your local Wi-Fi network via the touch screen interface for remote monitoring and control.
For detailed visual instructions, please refer to the official انسٽاليشن مينوئل (PDF).
4. آپريٽنگ هدايتون
4.1 User Interface and Control
The FLSUN S1 Pro utilizes a 7-inch Klipper firmware smart touch screen for intuitive control. The visual operation interface allows for smart adjustment and monitoring directly from the printer. Additionally, with advanced Microtac radar control and Wi-Fi connectivity, you can monitor and control your printer in real-time from mobile phones and PCs.
Image 4.1: Remote control and monitoring capabilities via the FLSUN World app on a mobile device.
- ريموٽ ڪنٽرول: Manage your printers remotely from anywhere.
- Tap it, Print it, Like it: Start printing tasks with a quick tap on the FLSUN World app, utilizing cloud storage for G-code files.
- Monitor in Pocket: Real-time checking of your printing progress.
- Smart Reminder: Receive notifications when print errors occur.
4.2 ڇپائي جو عمل
- ماڊل تيار ڪريو: Use compatible slicing software (FLSUN Slicer V2.0 or other slicers like PrusaSlicer, Cura) to prepare your 3D model. Ensure settings are optimized for the S1 Pro's capabilities, including its high speed and acceleration.
- منتقلي File: ڪٽيل جي-ڪوڊ منتقل ڪريو file to the printer via USB or Wi-Fi (FLSUN World app).
- پرنٽ شروع ڪريو: منتخب ڪريو file on the touch screen or through the app and initiate the print.
- نگراني: Utilize the built-in camera for real-time monitoring and time-lapse recording. The printer's low noise level (55dB) ensures a quiet operating environment.
- Power-Off Resume: In case of power interruption, the printer supports power-off continuous printing, resuming from where it left off. Vibration compensation further ensures print quality.
Image 4.2: Illustration of the FLSUN S1 Pro's epic speed capabilities: 1200mm/s max printing speed, 40000mm/s² max acceleration, and 110mm³/s peak flow rate.
Image 4.3: Key features for smooth and consistent printing, including AI-powered functions, auto-leveling, spaghetti detection, and perfect first layer adhesion.
Image 4.4: Advanced features like the Air Filter, Filament Dryer, Built-in camera, Intelligent Zoned Heating, and 16GB EMMC storage.
5. سار سنڀال
Regular maintenance ensures the longevity and optimal performance of your FLSUN S1 Pro 3D Printer.
- صفائي: Regularly clean the print bed, nozzle, and internal components to prevent debris buildup. Use a soft cloth and appropriate cleaning solutions.
- ايئر فلٽر: The printer is equipped with a combined HEPA + activated carbon air filter. Check and replace the filter periodically as needed to maintain air quality and prevent odors.
- Filament Dryer Box: Ensure the filament dryer box is functioning correctly to keep your filament dry, which is crucial for print quality.
- Nozzle جي چڪاس: Periodically inspect the 0.4mm hardened steel nozzle for wear or clogs. Replace if necessary. The all-metal hot end can reach up to 350°C, supporting various high-temperature filaments.
- لوڻ: Refer to the detailed manual for any lubrication requirements for moving parts.
Image 5.1: Diagram illustrating the 350°C hotend, 50°C chamber, and 120°C hot bed for optimal material handling.
6. مسئلا حل ڪرڻ
هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي آپريشن دوران منهن ڏيڻو پئجي سگهي ٿو.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Print Not Sticking to Bed | Improper bed leveling, dirty print surface, incorrect bed temperature. | Re-run auto-leveling. Clean the print surface with isopropyl alcohol. Adjust hot bed temperature according to filament type (Max 120°C). |
| تارن جي بندش | Dust in filament, incorrect hotend temperature, worn nozzle, heat creep. | Ensure filament is dry (use filament dryer). Verify hotend temperature (Max 350°C). Clean or replace nozzle. Check cooling fan operation. |
| "Spaghetti" Prints | Poor bed adhesion, model detaching, extrusion issues. | The S1 Pro features اسپگيٽي جي چڪاس. Ensure proper bed adhesion. Monitor print progress via the built-in camera. |
| پرنٽر جواب نه ڏئي رهيو آهي | Software glitch, loose connection, power issue. | Restart the printer. Check all cable connections. Ensure stable power supply. |
| خراب پرنٽ معيار | Incorrect slicing settings, worn nozzle, vibration, wet filament. | Optimize slicing parameters. Replace nozzle if worn. The printer has وائبريشن معاوضو; ensure it's active. Use filament dryer. |
Image 6.1: Features like the 55dB quiet fan and Power Off Resume Print (UPS) contribute to a reliable printing experience.
7. ٽيڪنيڪل وضاحتون
| زمرو | تفصيل | تفصيل |
|---|---|---|
| جنرل | وڌ ۾ وڌ ڇپائي جي رفتار | 1200mm/s |
| وڌ ۾ وڌ اسپيڊريشن | 40000mm/s² | |
| چوٽي جي وهڪري جي شرح | 110mm³/s | |
| حجم ٺاھيو | Φ320*320*430 mm³ (Maximum height of the cylinder: 383mm) | |
| ڪمرو | بند ٿيل | |
| شور جي سطح | 55 ڊي بي | |
| اوزار سر | ڪونج | 0.4mm Hardened Steel Nozzle (supports various nozzle sizes) |
| Max Hot End Temp | 350 ℃ | |
| Filament قطر | 1.75mm | |
| تنت | حمايت ٿيل Filament | Ideal: PLA, PETG, TPU. Satisfactory: ABS, ASA, PA, PC, PET. Capable: Carbon/Glass Fiber Reinforced PLA, PPS-CF, PPA-CF/GF. |
| Active Heating Dry Box | ها | |
| Filament Clog جي چڪاس | ها | |
| گرمي جي تپش | پليٽ ٺاهيو | بناوت واري PEI پليٽ |
| Max Build Plate Temp | 120 ℃ | |
| سمارٽ زون گرمائش | Inner Circle Ø220mm, Outer Ring 220-320mm | |
| اليڪٽرانڪس | ڏيکاريو | 7" رنگين ٽچ اسڪرين |
| ذخيرو | 16GB EMMC, 32GB USB Flash | |
| بجلي جي فراهمي | 110-240V، 50/60Hz | |
| آن موڊ پاور واپرائڻ | 400 واٽ | |
| سافٽ ويئر | فرم ويئر اپ گريڊ | OTA (اوور-دي-ايئر) |
| سلائينگ سافٽ ويئر | FLSUN Slicer V2.0, Other Slicers | |
| سپورٽ ٿيل OS | MacOS، ونڊوز | |
| خاصيتون | ڪئميرا جي نگراني | Realtime, Timelapse |
| فلامنٽ جي چڪاس | ها | |
| وائبريشن معاوضو | ها | |
| ملبي جي چڪاس | ها | |
| اسپگيٽي جي چڪاس | ها | |
| Screen Auto Sleep | ها | |
| Printer Auto Power Off | ها | |
| خودڪار ليولنگ | ها | |
| بجلي جي نقصان جي بحالي | Yes (Z lift, Backup Battery) | |
| ايئر فلٽر | HEPA + Activated Carbon | |
| جسماني طول و عرض | پيداوار جا طول و عرض (ڊي x ڊبليو x ايڇ) | 23.62"ڊي x 34.25"ڊبليو x 9.45"ايڇ (تقريبن 600 ملي ميٽر x 870 ملي ميٽر) |
| Physical Dimension (Printer) | 550*596*1030mm | |
| شيءِ جو وزن | 113 پائونڊ (تقريبن 51.2 ڪلوگرام) | |
| رنگ | ڪارو |
Image 7.1: Comprehensive technical specifications for the FLSUN S1 Pro 3D Printer.
8. وارنٽي ۽ سپورٽ
FLSUN is committed to providing reliable products and excellent customer service.
- واپسي: The product is eligible for 30-day easy returns. Please refer to the retailer's return policy for specific details.
- ڪسٽمر سپورٽ: For technical assistance, troubleshooting, or warranty inquiries, please contact FLSUN Customer Support. You can often find support resources and contact information on the official FLSUN webسائيٽ يا پرچون ڪندڙ ذريعي جتي پراڊڪٽ خريد ڪئي وئي هئي.
- حفاظتي منصوبا: Extended protection plans, such as a 4-Year Protection Plan, may be available for purchase separately to provide additional coverage beyond the standard warranty.
- آن لائين وسيلا: جو دورو ڪريو FLSUN Store on Amazon for additional product information, FAQs, and support.
