PowMr Hybrid Solar Inverter 12000W User Manual

1. تعارف

This manual provides essential information for the safe installation, operation, and maintenance of your PowMr Hybrid Solar Inverter 12000W. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety. Keep this manual for future reference.

2. حفاظت جي ڄاڻ

WARNING: This inverter generates high voltage. Installation and maintenance must be performed by qualified personnel only. Failure to follow these instructions may result in serious injury or death.

• Do not attempt to disassemble or repair the inverter yourself. Contact qualified service personnel.
• Ensure all wiring is correctly sized and installed according to local and national electrical codes.
• Disconnect all power sources (PV, battery, AC input) before performing any maintenance or wiring.
• Install the inverter in a well-ventilated, dry, and cool environment, away from flammable materials.
• inverter جي مناسب گرائونڊنگ کي يقيني بڻائي.

Figure 2.1: The inverter features comprehensive protection against over/under voltage, overload, short circuit, over-temperature, and anti-backfeed.

3. پراڊڪٽ ختمview

3.1 اهم خاصيتون

• پيداوار: 12000W continuous (24000W peak), 120/240Vac split-phase output.
• PV ان پٽ: Maximum 6600W PV input power, 500V DC maximum, 22A. PV starting voltage: ≥150V.
• MPPT Charger: Dual 100A MPPT chargers, max 200A charge current.
• بيٽري مطابقت: Supports 48V Li-ion, Lead-Acid, and user-defined battery types.
• Battery-Less Mode: Capable of powering loads directly from PV/AC without a battery connected.
• متوازي آپريشن: Supports up to 6 units in parallel for increased power output.
• نگراني: Large LCD display, dynamic flow diagrams, and optional WiFi for remote monitoring via mobile app.
• مواصلاتي بندرگاهن: RS485, CAN, USB interfaces for integration with battery BMS, generator ATS, and smart home systems.

شڪل 3.1: ختمview of the 12KW Split-Phase Hybrid Solar Inverter's main features and capabilities.

3.2 Product Appearance and Components

شڪل 3.2: اڳيان ۽ پاسي view ليبل ٿيل حصن سان انورٽر جو.

1. LCD ڊسپلي
2. LED اشارا
3. Touchable Key
4. آن/آف روڪر سوئچ
5. PV ان پٽ (1/1)
6. بيٽ ان پٽ (+)
7. بيٽ ان پٽ (-)
8. خشڪ رابطي
9. CAN/RS485 Port
10. وائي فائي پورٽ
11. USB-B پورٽ
12. گرائونڊ اسڪرو
13. AC OUT (L1+L2+N)
14. AC IN (L1+L2+N)
15. AC INPUT Breaker
16. متوازي ڪميونيڪيشن پورٽ

4. سيٽ اپ ۽ تنصيب

4.1 پيڪنگ ۽ چڪاس

Upon receiving the inverter, carefully unpack it and inspect for any shipping damage. Ensure all components listed in the package contents are present:

• Solar inverter unit
• متوازي مواصلاتي ڪيبل
• 2 × battery terminal lugs
• 2 × M5 سکرو
• استعمال ڪندڙ دستي

Note: WiFi module, batteries, adapters, solar/battery wires/cables are excluded and require additional purchase if needed.

4.2 انورٽر کي چڙهڻ

The inverter is designed for indoor (IP20) installation. Choose a mounting location that is:

• Vertical, on a solid surface capable of supporting the inverter's weight (approximately 27kg / 59.5lbs).
• Well-ventilated to allow for heat dissipation.
• Protected from direct sunlight, moisture, and dust.
• وائرنگ ۽ سار سنڀال لاءِ دستياب.

4.3 وائرنگ ڪنيڪشن

All wiring must comply with local electrical codes. Use appropriate wire gauges for all connections.

1. گرائونڊنگ: Connect the grounding screw (12) to a reliable earth ground.
2. بيٽري ڪنيڪشن: Connect the 48V battery bank to the BAT INPUT (+) (6) and BAT INPUT (-) (7) terminals. Ensure correct polarity.
3. PV ان پٽ: Connect the solar panel array to the PV INPUT (1/1) (5) terminals. Observe correct polarity and ensure PV voltage is within specified limits (Max 500V DC, starting voltage ≥150V). Use 10AWG PV wire.
4. AC ان پٽ: Connect the utility grid or generator AC input to the AC IN (L1+L2+N) (14) terminals.
5. AC putاھر: Connect your loads to the AC OUT (L1+L2+N) (13) terminals. The inverter provides 120/240Vac split-phase output.
6. Parallel Communication (Optional): If installing multiple inverters in parallel, connect the Parallel Communication Port (16) between units using the provided cable.
7. ٻيا ڪنيڪشن: Utilize RS485, CAN, USB, and dry contact ports (8, 9, 10, 11) for external communication and control as needed.

شڪل 4.1: مثالample of multiple inverters connected in parallel. Professional guidance is required for actual connections.

Figure 4.2: The inverter supports various 48V battery systems, including battery-less operation.

5. آپريٽنگ هدايتون

5.1 پاور آن/آف

1. پڪ ڪريو ته سڀئي وائرنگ ڪنيڪشن محفوظ ۽ صحيح آهن.
2. Switch on the battery breaker, then the PV breaker.
3. Flip the ON/OFF Rocker Switch (4) to the 'ON' position.
4. Switch on the AC INPUT Breaker (15).
5. To power off, reverse the sequence: AC INPUT Breaker off, ON/OFF Rocker Switch off, PV breaker off, battery breaker off.

5.2 LCD ڊسپلي ۽ سيٽنگون

The large LCD display (1) provides real-time energy visualization and system status. Use the touchable keys (3) to navigate menus and adjust settings. Refer to the detailed settings section in the full user manual for specific parameter configurations, including:

• Battery charging parameters (voltage، موجوده)
• volاھر وولٽtage ۽ تعدد
• Operating modes (e.g., Solar First, Utility First, Battery First)
• Time-of-Use (TOU) control for smart charging/discharging

5.3 Battery-Less Mode

The inverter supports battery-less operation, allowing it to power loads directly from solar PV and/or AC input without a connected battery. This mode is useful for specific applications or during battery maintenance. Ensure proper configuration through the LCD settings.

6. سار سنڀال

باقاعده سار سنڀال توهان جي انورٽر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

• صفائي: وقت بوقت انورٽر جي ٻاهرين ۽ وينٽيليشن جي سوراخن کي صاف ڪريو ته جيئن مٽي گڏ ٿيڻ کان بچي سگهجي، جيڪا ٿڌي ٿيڻ ۾ رڪاوٽ بڻجي سگهي ٿي. هڪ سڪل، نرم ڪپڙو استعمال ڪريو.
• ڪنيڪشن: Annually inspect all electrical connections for tightness and signs of corrosion. Re-tighten if necessary.
• ماحول: پڪ ڪريو ته انسٽاليشن جو ماحول مخصوص درجه حرارت ۽ نمي جي حدن اندر رهي.
• فرم ویئر: ٺاهيندڙ جي چيڪ ڪريو website for any available firmware updates. Firmware updates can improve performance and address known issues.

WARNING: Always disconnect all power sources before performing any cleaning or inspection.

7. مسئلا حل ڪرڻ

هي سيڪشن عام مسئلن جا حل فراهم ڪري ٿو. هتي درج نه ڪيل مسئلن لاءِ، ڪسٽمر سپورٽ سان رابطو ڪريو.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information, please refer to the documentation provided with your purchase or contact PowMr customer service. For technical support, troubleshooting assistance, or inquiries regarding parts and service, please visit the official PowMr webسائيٽ تي وڃو يا انهن جي ڪسٽمر سپورٽ چينلز سان رابطو ڪريو.

آن لائين وسيلا:

• PowMr Store on Amazon: Visit PowMr Store