AtomStack F03-0329-0AA1 Swift
وضاحتون
- پيداوار جو نالو: AtomStack Swift
- ماڊل نمبر: F03-0329-0AA1
- نسخو: B
- پاور ان پٽ: ڊي سي 24V
- بندرگاهن: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- حالت اشارو: Solid blue when working
پيداوار جي استعمال جون هدايتون
حصن جي فهرست:
- ايڪس محور اسيمبلي
- کاٻي Y-محور اسيمبلي (موٽر سان)
- ساڄي Y-محور اسيمبلي
- پاور اڊاپٽر
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
حصن جي فهرست
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
نوٽ: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
نوٽ:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
ڌيان ڏيڻ جو طريقو:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
ترڪيب:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
ڪمپيوٽر سافٽ ويئر ڊائون لوڊ ڪرڻ جو طريقو:
ايٽم اسٽيڪ اسٽوڊيو ڊائون لوڊ لنڪ: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - ڊائون لوڊ ڪرڻ لاء اسڪين ڪريو
سافٽ ويئر وسيلا
لائيٽ برن
Unofficial software. Requires a separate purchase
لائيٽ برن سافٽ ويئر ڊائون لوڊ ڪرڻ جو طريقو: ڊائون لوڊ لنڪ: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- لائيٽ برن سافٽ ويئر کوليو، چونڊيو: ڊوائيسز - درآمد ڪريو
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
نوٽ: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
استعمال ڪندڙ ھدايت
اسان سان رابطو ڪريو
وڌيڪ معلومات لاءِ QR ڪوڊ اسڪين ڪريو:
- Unboxing & First Use
- Use with the AtomStack APP
- مشڪلاتون
- سار سنڀال
ڪسٽمر سروس:
- For the detailed warranty policy, please visit our official webسائيٽ: www.atomstack.com
- ٽيڪنيڪل سپورٽ ۽ خدمت لاء، مهرباني ڪري اي ميل ڪريو: support@atomstack.com
ٺاهيندڙ:
شينزين AtomStack ٽيڪنالاجي ڪمپني، لميٽيڊ
زپ ڪوڊ: 518172
ائڊريس:
17th فلور، بلڊنگ 3A، فيز II، انٽيليجنٽ پارڪ، نمبر 76، Baohe Avenue، Baolong Street، Longgang District، Shenzhen، Guangdong، China.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
FAQ
مون کي ڇا ڪرڻ گهرجي جيڪڏهن مون کي انسٽاليشن دوران مسئلن جو سامنا آهي؟
If you face any difficulties during installation, refer to the video tutorial available on the official webسائيٽ يا مدد لاءِ ڪسٽمر سپورٽ سان رابطو ڪريو.
دستاويز / وسيلا
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] استعمال ڪندڙ دستياب F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |