اي وي شيلڊ ايپ
پيداوار جي ڄاڻ
وضاحتون:
- آپريٽنگ جلدtage: ~230V AC
- وڌ ۾ وڌ موجوده: 80A
- رابطي: 2.4GHz وائي فائي
- خاصيتون: اوور/ هيٺ حجمtage Protection, Over/Under Current Protection, Delay Protection, Timer Switch, Voltage/Current Imbalance Protection, Phase Sequence Protection, Bidirectional Energy Monitor
- ڏيکاريو: White and Red Backlight
پيداوار جي استعمال جون هدايتون
تنصيب:
Ensure the device is installed by a certified installer following local safety guidelines. Connect the device according to terminal markings to avoid malfunctions or safety hazards.
وائي فائي سان ڳنڍڻ:
- Turn on the device and wait for the Wi-Fi LED indication.
- تيز فليش: Ready to Connect.
- سست فليش: Wi-Fi OFFLINE.
- LED آن: وائي فائي ڳنڍيل.
- To reset Wi-Fi, press and hold the reset button.
APP استعمال ڪندي:
- Download a TUYA-based APP from the APP store.
- هڪ اڪائونٽ ٺاهيو يا مهمان طور APP استعمال ڪريو.
- Add a new device by pressing the symbol in the top right-hand corner.
- Ensure the device is connected to power and your phone is on a local 2.4GHz Wi-Fi network.
ڊسپلي سيٽنگون:
The display shows different colors for different statuses: White – Normal, Red – Fault detected, Backlight OFF after 180 seconds.
استعمال جون حالتون:
- جلدtage: ~230V AC
- Amps: وڌ. 80A
رد ڪرڻ
EVshield APP
This guide is to be used as a reference only. EVshield does not provide advice, instructions or recommendations regarding the electrical installation and cannot be held liable for incorrect installation of the EVshield SMART-pack and associated components. Always follow the instructions of the charger manufacturer and have the installation carried out by a certified installer according to local safety guidelines.
APP سان نيو
APP اسٽور تان ڪا به TUYA تي ٻڌل APP ڊائون لوڊ ڪريو. مثال طورampيا، هيٺ ڏنل سرڪاري TUYA ايپس مان هڪ استعمال ڪريو:
- هڪ اڪائونٽ ٺاهيو يا مهمان طور APP استعمال ڪريو.
- In the top right-hand corner. Press the
symbol to add anew device.
- Make sure the device is connected to mains power
- Make sure the phone is connected to a local 2.4GHz Wi-Fi network
2.4GHz وائي فائي سيٽنگون
Wi-Fi LED Indication
- تيز فليش: ڳنڍڻ لاءِ تيار
- سست فليش: Wi-Fi OFFLINE
- LED آن: وائي فائي ڳنڍيل
افعال ري سيٽ ڪريو
- Reset Wi-Fi : : Press & Hold
- Reset Consumption: Go to Display “EPS”
پريس ۽ جهليو - فيڪٽري ري سيٽ: Go to Display “Hz Frequency” پريس ۽ جهليو
حمايت
APP سان نيو
Installation Wiring and Dimensions
Correct Wiring Required
The Device must be installed in accordance with the terminal markings. Incorrect wiring may result in malfunction or safety hazards.
استعمال جون حالتون
- جلدtage : ~230V AC
- Amps : وڌ ۾ وڌ. 80A
- گرمي پد : -20°C ~ 60°C
- نمي : <85%
- اوچائي : <2000 م
- وائرنگ: وڌ. 35mm2
- چڙهڻ: 35mm DIN-rails
حفاظت ۽ تنصيب جون هدايتون
No Isolation Function
This device does not provide an isolation function.
Always disconnect mains power before servicing or repairing the device.
Neutral Line Connection
The neutral (N) line is internally connected and does not include a disconnection mechanism.
Ensure appropriate external disconnection measures are in place.
Supplementary Protection Only
This product offers limited current protection and is not a substitute for a standard circuit breaker.
For proper short-circuit protection, install appropriate breakers at the upstream side of this device.
فنڪشن ختمview
- و Overيڪ جلدtage تحفظ
- جلد تحتtage تحفظ
- Overcurrent تحفظ
- Under Current Protection
- Delay Protection
- ٽائمر سوئچ
- جلدtage Imbalance Protection
- موجوده عدم توازن تحفظ
- شورtage Phase Protection
- مرحلو تسلسل تحفظ
- Bidirectional Energy Monitor
- 2.4GHz Wi-Fi Transmitter
- APP enabled
ڊسپلي سيٽنگون
- اڇو: عام
- ڳاڙهو: نقص معلوم ٿيو
- پوئتي روشني: 180 سيڪنڊن کان پوءِ بند ڪريو
اڪثر پڇيا ويندڙ سوال (FAQ)
- Q: Can I install the EVshield SMART-pack myself?
- A: We recommend having the installation carried out by a certified installer to ensure safety and proper functioning.
- عبرت: آئون وائي فائي ڪنيڪشن کي ڪيئن ري سيٽ ڪري سگهان ٿو؟
- A: Press and hold the reset button to reset the Wi-Fi connection on the device.
- Q: What should I do if the Wi-Fi LED indicates “Wi-Fi OFFLINE”?
- A: Check your Wi-Fi network connection and ensure it is a local 2.4GHz network for proper functioning.
دستاويز / وسيلا
 |
EVshield EVshield App [pdf] استعمال ڪندڙ ھدايت EVshield App, App |