FSP PDU ۽ سار سنڀال بائي پاس سوئچ ماڊل
وضاحتون
- ماڊل: Bypass Switch Module V. 2.0
- استعمال: External power distribution unit for UPS systems or voltagاي ريگيوليٽر
- چڙهڻ: Rack or Wall Mountable
- ان پٽ پاور: Mains power cord
- putاھرين رسيدون: Master for computer, Slave for peripherals
- ڪارڪردگي: Maintenance bypass, Power distribution, Power saving
تعارف
پيداوار يو پي ايس سسٽم يا وڏي پيماني تي حجم سان گڏ هڪ خارجي طاقت جي تقسيم يونٽ جي طور تي استعمال ڪيو ويندو آهي.tage regulators. It allows to manually transfer of the connected equipment to utility power via a bypass switch, permitting scheduled maintenance or UPS replacement without power interruption. Combined power distribution feature and the master-controlled design, it provides a maintenance bypass function and power saving within a rack mechanism.
Rack Mount/Wall Mount the Unit
The module can be mounted to a 19” enclosure or wall. Please follow chart below for rack/wall mount installation.
پيداوار ختمview 
- Master output receptacle (for connecting a computer)
- Slave output receptacles (for connecting peripherals)
- Socket to UPS output
- Socket to UPS input
- بائي پاس سوئچ
- AC ان پٽ
- سرڪٽ بريڪر
- Master/Slave function switch
- پاور ايل ايم
- ايل اي ڊي تي غلام
انسٽاليشن ۽ آپريشن
معائنو
Remove the unit from the shipping package and inspect it for damage that may have occurred during transportation. Notify the carrier and place of purchase if any damage is found. The shipping package contains:
- سار سنڀال بائي پاس سوئچ ماڊل x 1
- تڪڙو ھدايت x 1
- مين پاور ڪنڊ x 1
- اسڪرو ۽ چڙهڻ وارا ڪن
وال آئوٽليٽ سان ڳنڍيو
Plug the input power cord of the unit to the wall outlet. The Power LED will light up when the mains is normal. The Power LED will be off while power failure. 
UPS سان ڳنڍيو
Connect a power cord from UPS input to UPS input socket on the unit. Use one power cord to connect UPS output to UPS output socket on the unit. 
سامان ڳن Connectيو
There are two types of output receptacles: Master and Slave. To save power consumption, the unit is equipped with Master and Slave output receptacles. The Master output receptacle will sense if the master device (computer) is on. If the master device is no longer drawing current, it will automatically shut down the power to the Slave output receptacles. Please refer to the charts below for detailed equipment connections.
نوٽ: When the computer is turned off, the Master output receptacle shuts off power to the slave output receptacles. However, when the computer goes into “sleep mode” or the power consumption of connected device to Master output receptacle is below 20 W, the Master output receptacle may not properly recognize the reduced power level.
آپريشن
بحالي بائي پاس ڏانهن منتقلي
سار سنڀال جي بائي پاس تي منتقل ڪرڻ کان اڳ، پڪ ڪريو ته پاور LED روشني آهي. روٽري بائي پاس سوئچ کي "عام" کان "بائي پاس" ڏانهن منتقل ڪريو. هن وقت، سڀئي ڳنڍيل ڊوائيسز سڌي طرح يوٽيلٽي پاور ذريعي هلائي رهيا آهن. توھان بند ڪري سگھو ٿا UPS کي بند ڪريو ۽ UPS سان ڳنڍيندڙ ٻن ڪيبلن کي ڌار ڪري سگھو ٿا. پوء توھان ھاڻي UPS جي خدمت ڪري سگھو ٿا.
UPS تحفظ ڏانهن منتقلي
After maintenance service is done, make sure the UPS operation is normal. Then, reconnect UPS to the unit by following Installation Section. Verify the Power LED is lighting. Then transfer the rotary bypass switch from “Bypass” to “Normal”. Now, all connected devices are protected by UPS.
ماسٽر / غلام فنڪشن آپريشن
سڀني ڊوائيسز کي يونٽ سان ڳنڍڻ کان پوء، اسٽيٽس کي فعال ڪرڻ لاء "ماسٽر / غلام سوئچ" کي دٻايو (
). Slave On LED روشني ٿيندي جڏهن ماسٽر آئوٽ تي ڳنڍڻ وارو لوڊ 20W کان مٿي هوندو. اسٽيٽس کي غير فعال ڪرڻ لاءِ ”ماسٽر/غلام سوئچ“ کي دٻايو ()، فنڪشن بند ٿيل آهي ۽ غلام تي LED تي هوندو.
اسٽيٽس ۽ انڊيڪيٽر ٽيبل
اھم حفاظتي خبرداري (اھي ھدايتون محفوظ ڪريو)
- ھن يونٽ کي محفوظ طور تي هلائڻ لاءِ، مھرباني ڪري پڙھو ۽ ھدايتن تي عمل ڪريو احتياط سان.
- ھن دستاويز کي چ Readيءَ طرح پڙھو انپيڪ ڪرڻ ، انسٽال ڪرڻ ، يا هلائڻ جي ڪوشش ڪرڻ کان ا.
- You may keep this quick guide for further reference.
- احتياط: The product must be used indoors only.
- احتياط: يونٽ کي مائع جي ويجهو يا ضرورت کان وڌيڪ ڊي ۾ نه رکوamp ماحول.
- احتياط: مصنوعات کي سڌو سنئون سج ۾ يا گرم ذريعن جي ويجهو نه رکو.
- احتياط: مائع يا غير ملڪي شين کي پيداوار ۾ داخل ٿيڻ نه ڏيو.
- احتياط: 2P + گرائونڊ ساکٽ استعمال ڪندي پيداوار کي گرائونڊ ڪريو.
- احتياط: پراڊڪٽ کي انسٽال ڪرڻ وقت، پڪ ڪريو ته پراڊڪٽ ۽ ڊوائيسز جي رسي جي وهڪرن جو مجموعو 3.5mA کان وڌيڪ نه هجي.
پيداوار جي استعمال جون هدايتون
تنصيب ۽ آپريشن جو معائنو
Remove the unit from the shipping package and inspect for any damage. Contact the carrier if damage is found.
Rack Mount/Wall Mount the Unit
The module can be mounted to a 19″ enclosure or wall. Follow the provided instructions for installation.
وال آئوٽليٽ سان ڳنڍيو
Plug the input power cord into the wall outlet. Power LED indicates normal mains power.
UPS سان ڳنڍيو
Connect UPS input/output cords to the corresponding sockets on the unit.
Operation Transfer to Maintenance Bypass
Ensure the Power LED is lit, switch the bypass switch from Normal to Bypass for the utility power supply.
سامان ڳن Connectيو
Connect devices to the Master and Slave output receptacles based on power consumption requirements.
UPS تحفظ ڏانهن منتقلي
After maintenance, reconnect UPS to the unit and switch the bypass from Bypass to Normal for UPS protection.
ماسٽر / غلام فنڪشن آپريشن
Enable/disable the Master/Slave function switch based on load requirements. Slave LED indicates load status.
اڪثر پڇيا ويا سوال
Q: How do I know if the unit is receiving power? A: The Power LED will indicate normal mains power by lighting up. Q: Can I mount the unit on a wall? A: Yes, the unit can be wall-mounted using the provided instructions. Q: What is the purpose of the Master/Slave function? A: The Master/Slave function helps in power saving by controlling power to peripherals based on the main device status.
The Power LED will indicate normal mains power by lighting up.
Can I mount the unit on a wall?
Yes, the unit can be wall-mounted using the provided instructions.
What is the purpose of the Master/Slave function?
The Master/Slave function helps in power saving by controlling power to peripherals based on the main device status.
دستاويز / وسيلا
 |
FSP PDU ۽ سار سنڀال بائي پاس سوئچ ماڊل [pdf] استعمال ڪندڙ ھدايت PDU ۽ سار سنڀال بائي پاس سوئچ ماڊيول، سار سنڀال بائي پاس سوئچ ماڊيول، بائي پاس سوئچ ماڊيول، سوئچ ماڊيول، ماڊيول |