5110

استعمال ڪندڙن جو دستور

5110 چيڪ انجن ڪوڊ ريڊر

سلام…
On behalf of everyone at INNOVA, we want to welcome you and thank you for purchasing the INNOVA® CarScan Reader! Every automotive diagnostic scan tool we make includes tons of pro-level features designed to help maximize, and simplify, your OBD2 diagnostic routine. In this manual, we will guide you on how to access your tool’s intuitive functions including:

Monitor Light Diagnostics
 ABS معائنو
 سموگ / اخراج جي تياري
 Code Severity Level Identifier
 Erase Diagnostic Trouble Codes (DTCs)
 ۽ وڌيڪ…
Plus, gain the benefit of having unlimited access to real world solutions on your mobile device:

RepairSolutions2® seamlessly pairs with your INNOVA OBD2 Scan Tool to deliver the most complete automotive repair database with verified fixes from ASE Certified Master Technicians. Find the right fix and the right parts instantly on your mobile device.

Enjoy using your INNOVA Scan Tool!
توهان جو مخلص،
انووا ٽيڪنيڪل ٽيم
P.S.: Connect with us to see what we’re up to…

قانوني ڄاڻ

FCC تعميل بيان
ھي سامان آزمايو ويو آھي ۽ مليو آھي ڪلاس بي ڊجيٽل ڊيوائس جي حدن جي تعميل لاءِ، 15 حصو FCC ضابطن جي مطابق. اهي حدون هڪ رهائشي تنصيب ۾ نقصانڪار مداخلت جي خلاف مناسب تحفظ فراهم ڪرڻ لاء ٺهيل آهن. هي سامان پيدا ڪري ٿو، استعمال ڪري ٿو ۽ ريڊيو فريڪئنسي توانائي کي تابڪاري ڪري سگهي ٿو، ۽، جيڪڏهن نصب نه ڪيو ويو ۽ هدايتن جي مطابق استعمال ڪيو ويو، ته شايد ريڊيو ڪميونيڪيشن کي نقصانڪار مداخلت جو سبب بڻائين. بهرحال، اتي ڪا به ضمانت نه آهي ته مداخلت ڪنهن خاص تنصيب ۾ نه ٿيندي. جيڪڏهن هي سامان ريڊيو يا ٽيليويزن جي استقبال لاء نقصانڪار مداخلت جو سبب بڻائيندو آهي، جيڪو سامان کي بند ڪرڻ ۽ ان کي بند ڪرڻ سان طئي ڪري سگهجي ٿو، صارف کي حوصلا افزائي ڪئي ويندي آهي مداخلت کي درست ڪرڻ جي ڪوشش ڪرڻ جي هيٺيان قدمن مان هڪ يا وڌيڪ:

• وصول ڪندڙ اينٽينا کي ٻيهر ترتيب ڏيو يا منتقل ڪريو.
• سامان ۽ وصول ڪندڙ جي وچ ۾ علحدگي کي وڌايو.
• سامان کي ھڪڙي سرڪٽ تي ھڪڙي آئوٽليٽ ۾ ڳنڍيو جنھن کان رسيور ڳنڍيل آھي.
• مدد لاءِ ڊيلر يا تجربيڪار ريڊيو/ٽي وي ٽيڪنيشن سان صلاح ڪريو.

تعميل جي ذميوار پارٽي طرفان واضح طور تي منظور ٿيل تبديليون يا ترميمون صارف جي اختيار کي ختم ڪري سگھن ٿيون سامان کي هلائڻ لاءِ.

ايف سي سي آر ايف تابڪاري جي نمائش جو بيان

• هن ڊوائيس جي اندر ٽرانسميٽر ٻئي ڪنهن اينٽيمنايٽر يا ٽرانسميٽر سان گڏ ڪنهن به هنڌ تي واقع نه ٿيڻ گهرجن.
• This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Please follow the operation instructions as documented in this manual to fulfill IC RF exposure compliance requirements.

ٽريڊ مارڪ
Title, ownership rights, and intellectual property rights in the Products and Services shall remain in Innova and/or its licensors and other suppliers. Licensee and End Users acknowledge such ownership,  confidential information, and intellectual property rights and will not take any action to jeopardize, limit or interfere in any manner with Innova’s or its licensors’ or other suppliers’ ownership of or rights with respect to the Products and Services. The Products and Services may be protected by Patent, Trademark, Copyright and/or other intellectual property laws and by international treaties. All trademarks used in connection with the Products and Services are owned by Innova, its affiliates or its licensors and other suppliers, and no license to use any such trademarks is provided hereunder. Licensee and End Users agree that Innova may use in any manner and without limitation all comments, suggestions, complaints and other feedback Licensee and End Users provide relating to the Products and Services. For more information and current listing of trademarks, please visit https://www.innova.com/pages/trademarks.

پيٽنٽ
انووا اليڪٽرانڪس ڪارپوريشن ڪيترن ئي آمريڪي پيٽرن سان پنهنجي دانشورانه ملڪيت جي حفاظت ڪري ٿي، جيڪي هن پراڊڪٽ جي تحقيق، ڊزائين ۽ تيار ڪرڻ لاء استعمال ڪيا ويا آهن. مهرباني ڪري دورو ڪريو https://www.innova.com/pages/patents اضافي معلومات لاء.

ڪيليفورنيا پراڊڪٽ ڊيڄاريندڙ

خبردار
هي پراڊڪٽ توهان کي ڪيميائي کي ظاهر ڪري سگهي ٿو جنهن ۾ ڊي اين پي شامل آهي، جيڪا ڪيليفورنيا جي رياست کي معلوم ٿئي ٿي ته سرطان جو سبب بڻائين. وڌيڪ معلومات لاءِ وڃو www.P65 ورننگس .ca.gov.

حفاظتي احتياط

حفاظت پهريون!
It is important that every user of this product read all instructions and warnings included in this manual to ensure their safety, the safety of others, and to prevent damage to this product and the vehicle being diagnosed and repaired. This manual describes common test procedures used by experienced service technicians. It is assumed that the user has a good understanding of vehicle systems before using this product.
Many test procedures require precautions to avoid accidents that can result in personal injury, and/or damage to the vehicle or test equipment. At a minimum, the following safety standards should be followed whenever using this product, or whenever working on a vehicle.

• جڏهن هڪ انجڻ هلندي آهي، اها ڪاربان مونو آڪسائيڊ پيدا ڪري ٿي، هڪ زهريلي ۽ زهريلي گيس. ڪاربان مونو آڪسائيڊ جي زهر جي ڪري سنگين زخمن يا موت کان بچڻ لاءِ، گاڏي کي صرف هوادار علائقي ۾ هلايو.
• توهان جي اکين کي هلندڙ شين ۽ گرم يا ڪاسٽڪ مائع کان بچائڻ لاء، هميشه منظور ٿيل حفاظتي اکين جي حفاظت پائڻ.
• When an engine is running, many parts (such as the coolant fan, pulleys, fan belt, etc.) turn at high speed. To avoid serious injury, always be aware of moving parts. Keep a safe distance from these parts as well as other potentially moving objects.
• انجڻ جا حصا تمام گرم ٿي ويندا آهن جڏهن انجڻ هلندي آهي. سخت جلن کي روڪڻ لاء، گرم انجڻ جي حصن سان رابطي کان بچڻ.
• انجڻ شروع ڪرڻ کان اڳ جاچ يا خرابي جي حل لاءِ، پڪ ڪريو ته پارڪنگ بريڪ لڳل آهي. پارڪ ۾ ٽرانسميشن رکو (خودڪار ٽرانسميشن لاءِ) يا غير جانبدار (دستي ٽرانسميشن لاءِ). موزون ٽائر بلاڪ سان ڊرائيو سائيڪلن کي بلاڪ ڪريو.
• ٽيسٽ سامان کي ڳنڍڻ يا ختم ڪرڻ جڏهن اگنيشن آن آهي ٽيسٽ سامان ۽ گاڏي جي اليڪٽرانڪ حصن کي نقصان پهچائي سگھي ٿو. اسڪين ٽول کي گاڏي جي ڊيٽا لنڪ ڪنيڪٽر (DLC) مان اسڪين ٽول کي ڳنڍڻ يا ختم ڪرڻ کان اڳ اگنيشن کي بند ڪريو.
• گاڏي جي بجليءَ جي ماپ وٺڻ وقت آن بورڊ ڪمپيوٽر کي نقصان کان بچڻ لاءِ، هميشه هڪ ڊجيٽل ملٽي ميٽر استعمال ڪريو جنهن ۾ گهٽ ۾ گهٽ 10 Megohms رڪاوٽ هجي.
• ٻارڻ ۽ بيٽري وانپ انتهائي ٻرندڙ آهن. ڌماڪي کي روڪڻ لاءِ، بيٽري ۽ ايندھن جي بخارن کان تمام چمڪ، گرم ٿيل شيون، ۽ کليل شعلن کي پري رکو. ٽيسٽنگ دوران گاڏي جي ويجهو تماڪ نه پيئجي.
• انجڻ تي ڪم ڪرڻ وقت ٿلها ڪپڙا يا زيور نه پائڻ. ٿلها ڪپڙا پنن، پللي، بيلٽ وغيره ۾ ڦاٿل ٿي سگهن ٿا. زيور تمام تيز وهڪندڙ هوندو آهي ۽ جيڪڏهن اهو طاقت جو سرچشمو ۽ زمين جي وچ ۾ رابطو ڪري ته سخت جلائي سگهي ٿو.

حفاظتي خبرداري جون نشانيون
جڏهن توهان هي دستورالعمل پڙهندا آهيو، ته رنگين ڪوڊ ٿيل آئڪن حفاظتي خبردارين ۽ ڊيڄاريندڙن جي سڃاڻپ لاءِ استعمال ڪيا ويندا آهن. اهي توهان کي سنگين زخمن، ويٺي ويٺي ماڻهن کي زخمن، ۽ ملڪيت يا سامان کي نقصان کان بچائڻ ۾ مدد لاءِ مهيا ڪيا ويندا آهن. انهن آئڪن جا مطلب هن ريت آهن:

	زرد آئڪن - اشارو ڪري ٿو a ”نوٽ“ statement that offers special information or tips on what is being instructed.
	نارنگي آئڪن – Indicates a potential hazardous situation. Provides a ”خبردار“ statement on how to proceed to avoid serious injury to the user or bystanders, and/or damage to equipment.

لغت

OBD2 اصطلاحات
هيٺ ڏنل اصطلاح ۽ انهن جون وصفون OBD2 سسٽم سان لاڳاپيل آهن.

• Powertrain Control Module (PCM) – The PCM is the OBD2 accepted term for the vehicle’s “on-board computer.” In addition to controlling the engine management and emissions systems, the PCM also participates in controlling powertrain (transmission) operation. Most PCMs also have the ability to communicate with other computers on the vehicle (ABS, ride control, body, etc.).
• Monitor – Monitors are “diagnostic routines” programmed into the PCM. The PCM utilizes these programs to run diagnostic tests, and to monitor operation of the vehicle’s emissions-related components or systems to ensure they are operating correctly and within the vehicle manufacturer’s specifications. Currently, up to fifteen Monitors are used in OBD2 systems. Additional Monitors will be added as the OBD2 system is further developed.
  نوٽ: Not all vehicles support all fifteen Monitors.
• Enabling Criteria – Each Monitor is designed to test and monitor the operation of a specific part of the vehicle’s emissions system (EGR system, oxygen sensor, catalytic converter, etc.). A specific set of “conditions” or “driving procedures” must be met before the computer can command a Monitor to run tests on its related system. These “conditions” are known as “Enabling Criteria.” The requirements and procedures vary for each Monitor. Some Monitors only require the ignition key to be turned “On” for them to run and complete their diagnostic testing. Others may require a set of complex procedures, such as starting the vehicle when cold, bringing it to operating temperature, and driving the vehicle under specific conditions before the Monitor can run and complete its diagnostic testing.
• Complete / Incomplete / Disabled – The terms “Complete”, “Incomplete”, and “Disabled” are used throughout this manual. “Complete” means the PCM has commanded a particular Monitor to perform the required diagnostic testing on a system to ensure the system is operating correctly (within factory specifications). The term “Incomplete” means the PCM has not yet commanded a particular Monitor to perform diagnostic testing on its associated part of the emissions system. The term “Disabled” means the Monitor is not supported in the current cycle – This Drive Cycle (TDC).
• Trip – A Trip for a particular Monitor requires that the vehicle is being driven in such a way that all the required “Enabling Criteria” for the Monitor to run and complete its diagnostic tests are met. The “Trip Drive Cycle” for a particular Monitor begins when the ignition key is turned “On.” It is successfully completed when all the “Enabling Criteria” for the Monitor to run and complete its diagnostic testing are met by the time the ignition key is turned “Off.” Since each of the fifteen Monitors is designed to run diagnostics and tests on a different part of the engine or emissions system, the “Trip Drive Cycle” needed for each individual Monitor to run and complete varies.
• OBD2 Drive Cycle – An OBD2 Drive Cycle is an extended set of driving procedures that takes into consideration the various types of driving conditions encountered in real life. These conditions may include starting the vehicle when it is cold, driving the vehicle at a steady speed (cruising), accelerating, etc. An OBD2 Drive Cycle begins when the ignition key is turned “On” (when cold) and ends when the vehicle has been driven in such a way that all the “Enabling Criteria” are met for all its applicable Monitors. Only those trips that provide the Enabling Criteria for all Monitors applicable to the vehicle to run and complete their individual diagnostic tests qualify as an OBD2 Drive Cycle. OBD2 Drive Cycle requirements vary from one model of vehicle to another. Vehicle manufacturers set these procedures.
  Consult the vehicle’s service manual for OBD2 Drive Cycle procedures.
  نوٽ: Do not confuse a “Trip” Drive Cycle with an OBD2 Drive Cycle. A “Trip” Drive
  Cycle provides the “Enabling Criteria” for one specific Monitor to run and complete its diagnostic testing. An OBD2 Drive Cycle must meet the “Enabling Criteria” for all Monitors on a particular vehicle to run and complete their diagnostic testing.
• وارم اپ سائيڪل - گاڏي جي آپريشن انجڻ جي بند ٿيڻ کان پوءِ جتي انجڻ جو گرمي پد شروع ٿيڻ کان اڳ ان جي گرمي پد کان گهٽ ۾ گهٽ 40°F (22°C) وڌي ٿو، ۽ گهٽ ۾ گهٽ 160°F (70°C) تائين پهچي ٿو. PCM وارم اپ سائيڪلن کي ڪائونٽر طور استعمال ڪري ٿو ته جيئن ان جي ياداشت مان هڪ مخصوص ڪوڊ ۽ لاڳاپيل ڊيٽا کي خودڪار طريقي سان ختم ڪري سگهجي. جڏهن وارم اپ سائيڪلن جي مخصوص تعداد اندر اصل مسئلي سان لاڳاپيل ڪا به غلطي نه ملي، ته ڪوڊ خودڪار طريقي سان ختم ٿي ويندو آهي.

OBD2 مانيٽر
To ensure the correct operation of the various emissions-related components and systems, a diagnostic program was developed and installed in the vehicle’s on-board computer. The program has several procedures and diagnostic strategies. Each procedure or diagnostic strategy is made to monitor the operation of, and run diagnostic tests on, a specific emissions-related component or system. These tests ensure the system is running correctly and is within the manufacturer’s specifications. On OBD2 systems, these procedures and diagnostic strategies are called “Monitors.” Currently, fifteen Monitors are supported by OBD2 systems. Additional Monitors may be added because of Government regulations as the OBD2 system develops. Not all vehicles support all fifteen Monitors. Additionally, some Monitors are only supported by gasoline engine vehicles, while others are only supported by diesel engine vehicles. Monitor operation is either “Continuous” or “Non-Continuous,” depending on the specific Monitor.

مسلسل نگراني ڪندڙ
انهن مان ٽي مانيٽر انهن جي لاڳاپيل حصن ۽/يا سسٽم جي صحيح آپريشن لاءِ مسلسل نگراني ڪرڻ لاءِ ٺاهيا ويا آهن. مسلسل مانيٽر مسلسل هلندا آهن جڏهن انجن هلي رهيو هوندو آهي.

	جامع اجزاء مانيٽر
	غلط فائر مانيٽر
	فيول سسٽم مانيٽر

غير مسلسل مانيٽر
ٻيا ٻارهن مانيٽر "غير مسلسل" مانيٽر آهن. "غير مسلسل" مانيٽر هر سفر ۾ هڪ ڀيرو پنهنجي جاچ مڪمل ڪن ٿا.
نوٽ: The following Monitors are often used in gasoline vehicles.

	آڪسيجن سينسر مانيٽر
	آڪسيجن سينسر هيٽر مانيٽر
	Catalyst مانيٽر
	گرم Catalyst مانيٽر
	EGR (Exhaust Gas Recirculation) سسٽم مانيٽر
	EVAP سسٽم مانيٽر
	سيڪنڊري ايئر سسٽم مانيٽر

نوٽ: The following Monitors are often used in diesel vehicles.

	NMHC (Non-Methane Hydrocarbon Converting) Catalyst Monitor
	NOx/SCR Aftertreatment Monitor
	بوسٽ پريشر سسٽم مانيٽر
	Exhaust گيس سينسر مانيٽر
	PM (Particulate Matter) Filter Monitor

ADDITIONAL TERMINOLOGY & ACRONYMS

• ABS = Anti-Lock Braking System
• DLC = Data Link Connector (vehicle’s data port)
• DTC = Diagnostic Trouble Code
• MIL = Malfunction Indicator Light (Check Engine Light)
• OBD = On Board Diagnostics
• OBD2 / OBDII = On Board Diagnostics, Second Generation
• OEM = Original Equipment Manufacturer
• TDC = This Driving Cycle
• TSBs = Technical Service Bulletins

تعارف

اسڪين ٽول ڪنٽرول ۽ اشارا
هيٺ ڏنل شيون 1 کان 1 تائين جي جڳهن لاءِ شڪل 11 ڏسو.

1. ERASE بٽڻ – When pressed, erases Diagnostic Trouble Codes (DTCs) and Freeze Frame data from the vehicle’s computer, and resets Monitor Status.
2. DTC بٽڻ – When pressed, displays the DTC View screen or the next Diagnostic Trouble Code.
3. LINK بٽڻ – When the Scan Tool is connected to a vehicle, links the Scan Tool to the vehicle’s PCM to retrieve
   Powertrain DTCs from the computer’s memory.
4. ABS بٽڻ – When pressed, links the Scan Tool to the vehicle’s ABS control module to retrieve ABS DTCs from the computer’s memory.
5. گرين لائيٽ – Illuminates to indicate that all engine systems are running normally (all Monitors on the vehicle are active and performing their diagnostic testing, and no DTCs are present).
6. ھينئر آئي ايل – Illuminates to indicate there is a possible problem. “Pending” DTCs are present and/or the vehicle’s emission Monitor(s) are “Incomplete” as they have not completed their diagnostic testing routine.
7. ڳاڙهو ايل ايل – Illuminates to indicate there is a problem in one or more of the vehicle’s systems. The red LED is also used to indicate that “Confirmed” DTCs are present and are displayed on the DTC View screen. In this case, the Malfunction Indicator Light (Check Engine Light) on the vehicle’s instrument panel illuminates steadily.
8. LCD ڊسپلي – Displays test results, Scan Tool functions, Monitor Status information, etc. See Tool Display Functions for more details.[See page 9]
9. OBD2 CABLE – Connects the Scan Tool to the vehicle’s Data Link Connector (DLC).
10. اين ايف سي سينسر ايريا – Allows communication between your mobile phone and the Scan Tool to quickly access the RS2 App.
11. USB قسم-سي پورٽ – Allows connection to a computer to update firmware.

نوٽ: When you need to update firmware, ensure that you are using data cables instead of charge-only cables.

اسڪين ٽول ڊسپلي فنڪشن
See Figure 2 for the location of items 1 through 16 below:

1. I/M Monitor Status: SDC icon – Indicates that the I/M Monitor Status is Since DTCs Cleared (SDC).
2. I/M Monitor Status: TDC icon – Indicates that the I/M Monitor Status is This Drive Cycle (TDC).
3. مانيٽر آئڪن – Indicate which Monitors are supported by the vehicle under test, and whether or not the associated Monitor completed its diagnostic testing (Monitor Status).
   • When a Monitor icon is solid, it indicates that the Monitor is Complete, and it completed its diagnostic testing.
   • When a Monitor icon flashes slowly, it indicates that the Monitor is Incomplete, and it did not complete its diagnostic testing.
   • When a Monitor icon flashes quickly, it indicates that the Monitor is Disabled for the rest of This Drive Cycle.
   • When a Monitor icon does not illuminate, it is not supported.
   نوٽ: The I/M Monitor Status icons are associated with INSPECTION and MAINTENANCE (I/M) READINESS STATUS. Some states require that all vehicle Monitors have run and completed their diagnostic testing before a vehicle can be tested for Emissions (Smog Check). When the Scan Tool is linked to a vehicle, only the icons for Monitors that are supported by the vehicle under test are visible on the Scan Tool’s LCD.
4. لنڪ آئڪن – Indicates that the Scan Tool is communicating with the vehicle’s on-board computers.
5. گاڏي جو نشان – Indicates that the Scan Tool is being powered by the vehicle’s DLC connector.
6. MIL آئڪن – Indicates the status of the Malfunction Indicator Light (MIL). The MIL icon is visible only when a DTC has commanded the MIL on the vehicle’s dashboard to illuminate.
7. ABS آئڪن - اشارو ڪري ٿو في الحال ڏيکاريل ڊي ٽي سي هڪ اينٽي لاک بريڪنگ سسٽم ڪوڊ آهي.
8. CONFIRMED icon – Indicates the currently displayed DTC is a “Confirmed” code.
9. PENDING آئڪن - ظاھر ڪري ٿو في الحال ڏيکاريل DTC ھڪڙو "پينڊ" ڪوڊ آھي.
10. مستقل آئڪن - ظاهر ڪري ٿو هن وقت ڏيکاريل DTC هڪ "مستقل" ڪوڊ آهي.
11. فريز فريم آئڪن – Indicates that Freeze Frame data has been stored in the vehicle’s computer for the currently displayed DTC.
12. DTC ڊسپلي ايريا – Displays the Diagnostic Trouble Code (DTC) number. Each DTC is assigned a specific code number.
13. DTC Number Sequence – Indicates the sequence of the currently displayed DTC. The Scan Tool assigns a sequence number to each DTC that is present in the computer’s memory, starting with “01.”  Code number ”01” is always the highest priority code, and the one for which Freeze Frame data has been stored.
14. DTC Enumerator – Indicates the total number of DTCs retrieved from the vehicle’s computer.
15. شدت – Indicates the level of severity for the “Priority” DTC (DTC number “1”), as follows:
    شدت 1: هي غلطي عام طور تي اجزاء کي نقصان نه پهچائيندو آهي ۽ خدمت ڪرڻ گهرجي جڏهن آسان هجي.
    شدت 2: ھي نقص اجزاء کي نقصان پھچائي سگھي ٿو ۽ جلد کان جلد مرمت ڪيو وڃي.
    شدت 3: هي غلطي حصن کي نقصان پهچائيندو ۽ فوري طور تي مرمت ڪرڻ گهرجي.
16. بلوٽوٽ آئڪن – Indicates communication status with a compatible Innova mobile application (please visit www.innova.com/repairsolutions2 for more information). When ON, indicates an active Bluetooth connection has been established. When OFF, indicates Bluetooth is not connected.
17. RS icon – Indicates that the Scan Tool is connected to the RS2 App. The RS icon can also flash to indicate that the Scan Tool is submitting data to the RS2 App.[See page 11]

THE REPAIRSOLUTIONS2® (RS2) APP

(RS2) is a web-based service created to assist Do-itYourselfers and Professional technicians simplify their vehicle diagnostic process. In essence, RS2 helps you decode the diagnostic data collected by your INNOVA Innova’s RepairSolutions2® Scan Tool to arrive at a most likely fix. At its core, RS2 uses a database of millions of real-world verified fixes – collected over the last 25 years by ASE Master Technicians across the U.S. – that is cross-referenced to your specific vehicle’s problem to instantly arrive at a verified fix. Think of RS2 as your personalized technician to help diagnose, repair, and maintain your vehicle(s).®

THE RS2 APP GIVES YOU

• تصديق ٿيل اصلاحون – Find the most likely fixes reported and verified by ASE Technicians for the retrieved DTCs. Plus, quickly purchase the exact parts you need right from the app.
• Predicted Repairs – With millions of verified repair solutions, get a statistical probability of what repairs the vehicle may need in the next 12 months.
• TSBs & Recalls – Learn if there are any special NHTSA safety recalls or Technical Service Bulletins (TSBs) issued by the vehicle’s manufacturer.
• Vehicle Health Reports – Get a quick insight on how the vehicle’s vitals are currently performing (e.g., oil life, brake pad life, battery status, etc.) and get alerts to potential problems.
• Upcoming Maintenance - View the vehicle manufacturer’s recommended maintenance intervals. Plus, conveniently purchase the correct maintenance parts right from the app.
• ۽ گهڻو ڪجهه…

هارڊويئر جي گهرج

• Innova Scan Tool with Bluetooth connectivity
• Android or iOS Mobile Device

DOWNLOAD THE RS2 APP

• Apple iOS Devices (click the link)
  
• Android Devices (click the link)
  
• Additionally, you can turn on NFC and place your mobile device near the NFC antenna position.
  Your mobile device will take you the download page automatically.
  نوٽ: Make sure that your mobile device supports NFC technology and is connected to an available Wi-Fi network.

REGISTER FOR AN ACCOUNT ON THE RS2 APP

1. Download and install the RS2 App.
2. Open the RS2 App, select “Create account” and sign up your account.

USING THE RS2 APP

1. Perform the Retrieving OBD2 Diagnostic Trouble Codes procedure. [See page 13]
2. If you want to pair the RS2 App to your Scan Tool using the NFC, go to step 3. If you want to pair the RS2 App to your Scan Tool manually, follow the steps below:
   • Open the RS2 App on your mobile phone.
   • Follow the on-screen prompts to pair your Scan Tool.
   • Begin the pairing process by selecting your Scan Tool from the list, go to step 4.
3. Turn on the NFC in your phone and place it near the NFC antenna position on the Scan Tool to pair it with the RS2 App.
4. Once paired, the RS icon will turn on and flash, indicating that the data from the Scan Tool is automatically transferred to the RS2 App to create a report.
   نوٽ: Always keep the Scan Tool connected to the vehicle’s DLC. If it’s not connected, the RS2 App will not pair with the Scan Tool and cannot perform diagnostic tests.

نوٽ: Check the vehicle thoroughly before performing any test.

خبردار: Always observe safety precautions whenever working on a vehicle. Refer to Safety First! [See page 3] for more information.

1. اگنيشن کي بند ڪريو.
2. گاڏي جي 16 پن ڊيٽا لنڪ رابط (ڊي ايل سي) ڳوليو.
3. Connect the Scan Tool’s cable connector to the vehicle’s DLC. The cable connector is keyed and will only fit one way.
   • If you have problems connecting the cable connector to the DLC, rotate the connector 180° and try again. If you still have problems, check the DLC on the vehicle and on the Scan Tool. Refer to the vehicle’s service manual to properly check the vehicle’s DLC.
   
4. Turn the ignition ON and DO NOT start the engine.
5. The Scan Tool will automatically link to the vehicle’s computer(s).
   • If the Scan Tool’s LCD is blank, it indicates there is no power at the vehicle’s DLC. Check the fuse panel and replace any burned out fuses.
   • If replacing the fuse(s) does not correct the problem, see the vehicle’s service manual to locate the proper computer (PCM) fuse/circuit. Perform any necessary repairs before continuing.
6. After a few seconds, the Scan Tool will retrieve and display any DTCs that are in the vehicle’s computer memory.
   • If ERROR is displayed on the Scan Tool’s LCD, it indicates there is a communication problem. This means that the Scan Tool is unable to communicate with the vehicle’s computer. Do the following:
   ━ Turn the ignition key OFF, wait 5 seconds and turn the key back ON to reset the computer.
   ━ Make sure the vehicle is OBD2 compliant.
   
7. Read and interpret the DTCs using the Scan Tool’s LCD and the green, yellow, and red LEDs.
   نوٽ: The green, yellow, and red LEDs are used (with the Scan Tool’s LCD) as visual aids to make it easier for you to determine the engine system conditions.
   • سائو ايڇ – Indicates that all engine systems are ”OK” and running normally.
   All Monitors on the vehicle are active and are performing their diagnostic testing, and no trouble codes are present. The message “0 DTC” displays on the Scan Tool’s LCD for further confirmation.
   • Yellow LED – Indicates one of the following conditions:
   PENDING CODE PRESENT – If the yellow LED illuminates, it may indicate the existence of a pending code. Check the Scan Tool’s LCD for confirmation. A pending code is confirmed by the presence of a numeric code and the word “Pending” on the Scan Tool’s LCD. If no pending code is displayed, the yellow LED indicates Monitor Status.
   نگراني جي حيثيت – If the Scan Tool’s LCD displays the message “0 DTC” (indicating there are no DTCs present in the vehicle’s computer), but the yellow LED illuminates, it indicates an “Incomplete Monitor” status. This means that some of the Monitors on the vehicle have not yet finished their diagnostic selftesting. This condition is confirmed by one or more blinking Monitor icons on the Scan Tool’s LCD. A blinking Monitor icon means the Monitor has not completed its diagnostic self-testing. All Monitor icons that are solid have completed their diagnostic self-testing.
   • لال LED – Indicates there is a problem with one or more of the vehicle’s systems. The red LED is also used to indicate that DTCs are present (displayed on the Scan Tool’s LCD). In this case, the Malfunction Indicator Light (Check Engine Light) on the vehicle’s instrument panel will illuminate.
   نوٽ: The Scan Tool will display one code at a time if codes are present in the vehicle’s computer memory. If no codes are present, the message “0 DTC” displays.
   
8. If more than one code is present, press the DTC button to display the next code.
   • When the last retrieved DTC is displayed, press the DTC button to command the Scan Tool to return to the “Priority” code.
   نوٽ: ٺاهيندڙن جو دورو ڪريو website, or reference the RS2 App [See page 11], for DTC definitions. Match the retrieved DTCs with those listed. Read the associated definition(s), and see the vehicle’s service manual for further evaluation.
   

VIEWING ABS DIAGNOSTIC TROUBLE CODES
نوٽ: ABS functionality is supported for Audi, BMW, Chrysler, Ford, GM, Honda, Hyundai, Kia, Mazda, Mitsubishi, Nissan, Subaru, Toyota, Volkswagen, and Volvo vehicles (identified by VIN) only. Visit the manufacturer’s webگاڏين جي مڪمل فهرست لاء سائيٽ.

1. Perform the Retrieving OBD2 Diagnostic Trouble Codes procedure.[See page 13]
2. Press the ABS button. After 4-5 seconds, the Scan Tool will retrieve and display any Diagnostic Trouble Codes (DTCs) stored in the ABS controller’s memory.
   • If ABS functionality is not supported by the vehicle, the message “N/A” displays.
   نوٽ: The Scan Tool will display a code only if codes are present in the vehicle’s computer memory. If no codes are present, the message “0 DTC” displays.
   
3. جيڪڏهن هڪ کان وڌيڪ ڪوڊ موجود آهن، ABS بٽڻ کي دٻايو ۽ ڇڏي ڏيو، جيئن ضروري هجي، اضافي ڪوڊ ڊسپلي ڪرڻ لاء.
4. When the last retrieved DTC has been displayed and the ABS button is pressed, the Scan Tool returns to the first code.
   • To exit the ABS mode, press the DTC button to return to the OBD2 mode.
   

ERASING DIAGNOSTIC TROUBLE CODES
نوٽ: When the Scan Tool’s ERASE function is used to erase the DTCs from the vehicle’s on-board computer, Freeze Frame data and manufacturer-specific enhanced data are also erased.
If you plan to take the vehicle to a Service Center for repair, DO NOT erase the DTCs from the vehicle’s computer. If the DTCs are erased, valuable information that might help the technician troubleshoot the problem will also be erased.
نوٽ: When DTCs are erased from the vehicle’s computer memory, the I/M Readiness Monitor Status program resets status of all the Monitors to a not run “flashing” condition.
To set all of the Monitors to a DONE status, an OBD2 Drive Cycle must be performed.
Refer to the vehicle’s service manual for information on how to perform an OBD2 Drive
Cycle for the vehicle under test.

1. Perform the Retrieving OBD2 Diagnostic Trouble Codes procedure.[See page 13] • To erase OBD2 DTCs: Wait until the DTCs are displayed on the Scan Tool’s LCD and then proceed to step 2.
   • To erase ABS DTCs: Press the ABS button to retrieve codes, and then proceed to step 2.
   
2. Press and release the Scan Tool’s ERASE button. The Scan Tool’s LCD will indicate “ERASE?” for confirmation.
   • If you change your mind and do not wish to erase the DTCs, press the DTC button to return to the code retrieval function.
   • If you wish to continue, press the ERASE button again. The message “ERASE” displays while the erase is in progress. When all retrievable information, including DTCs, has been cleared from the   computer’s memory, the Scan
   Tool will relink to the vehicle’s computer, and the Scan Tool’s LCD displays the message “DONE.”
   ━ If the erase is not successful, the message “SENT” displays on the Scan Tool’s LCD.

   • The Scan Tool will relink after a few seconds, and the message “READ” displays on the Scan Tool’s screen.
   نوٽ: Erasing DTCs does not fix the problem(s) that caused the DTC to be set. If proper repairs to correct the problem that caused the DTC to be set are not made, the DTC will appear again (and the Malfunction Indicator Light will illuminate) as soon as the vehicle is driven long enough for its Monitors to complete their testing.
   

TOOL FIRMWARE UPDATES

1. From your Windows PC, go to Innova OBD2 Scan Tool Updates by clicking this link: DOWNLOAD
   • In the “To update your tool” section, click “Windows.”
   • The application “OBDToolUpdaterPC_Vx.x.x_Live.exe” begins downloading to your Windows PC.
2. Locate the downloaded application and double click the file انسٽاليشن شروع ڪرڻ لاء.
   • If a Windows protection pop-up displays:
   ━ Click the “More info” link.
   ━ Click “Run Anyway” to proceed with the installation.
3. The InstallShield Wizard launches.
4. انسٽاليشن کي مڪمل ڪرڻ لاء هدايتن تي عمل ڪريو.
   • See Updating Your Scan Tool section to proceed. [See page 18]

1. From your Mac, go to Innova OBD2 Scan Tool Updates by clicking this link: DOWNLOAD
   • In the “To update your tool” section, click “Mac.”
   • جي file “RS2UpdaterMac_Vx.x.x_Live.zip” begins downloading to your Mac.
   
2. Locate the downloaded application in your Downloads folder.
3. ان زپ ڪريو file and double click the “RS2Updater_Vx.x.x.pkg” file انسٽاليشن شروع ڪرڻ لاء.
   • If the following security protection pop-up displays, click “OK” to close the window.
   ━ Right click the “RS2Updater_Vx.x.x.pkg” file and click “Open.”
   ━ Safely continue the installation by clicking “Open.”
4. انسٽاليشن کي مڪمل ڪرڻ لاء هدايتن تي عمل ڪريو.
   • See Updating Your Scan Tool section to proceed. [See page 18]

UPDATING YOUR SCAN TOOL

1. Locate and open the “OBD Tool Updater” application.
   • Double click to launch it.
   • Once open, the software will initially display “Disconnected.”
2. Using a standard USB cable, connect your tool to your computer.
   • Wait a few seconds for the software to detect it.
   نوٽ: If using a USB charging cable, and not a USB data cable, you will get the “Disconnected” message. Charging Cables: Can only charge devices, but cannot transfer data. These are commonly  called ‘Charge-only’ cables. Data Cables: Does both; charges your devices and transfers data.
   
3. Upon a good connection, the status changes to “Connected” and displays the tool’s current Firmware, Bootloader, and Database versions.
   • Wait a few more seconds for the software to check for updates.
   • If an update is available, an “Updates Available” message displays.
   • If an update is not available, a “No Updates Available” message displays.
   
4. If an update is available, click the “Update my tool now” button to begin.
   • The update is divided into individual steps such as bootloader, firmware, and database. Please be aware that this process may take up to 5 minutes. Do not disconnect the tool or close the app until all updates have been completed.
   • Click the “Release Notes” button to view what features and functions were added or corrected with this new version.
   
5. If the update was successful, the “Update Complete” message displays. At this point the tool has been updated and can be safely disconnected. n If an error occurred during the update, the progress bar turns red and stops with the message “Update Error.” Disconnect the tool and follow the steps indicated above to attempt the update process again.

مسئلا حل ڪرڻ جا طريقا

1. The tool is connected to the computer, but the app displays a ‘Disconnected’ status.
   • Make sure the USB data cable to the computer and your tool are properly seated.
   • ڪوشش ڪريو مختلف USB پورٽ تي سوئچ ڪرڻ.
   • Try using another USB cable.
   • Make sure you are using the correct Updater. Older model tools are not compatible with the new, OBD2 Tool Updater.
2. The tool is connected, but you do not see the “Update my tool now” button.
   • That means your tool is up to date and there are no new updates for your tool.
3. The update is stuck at 1% (or 5%) and not progressing.
   • Install the latest updater for your tool. Visit Innova.com/support جديد سافٽ ويئر حاصل ڪرڻ لاءِ.
   • Reboot your computer.
   • Disable any Antivirus software running in the background.
   • Attempt the update again by following the steps indicated above.

FAQ

عام سوال

وارنٽي ۽ ڪسٽمر سروس

محدود وارنٽي
ٺاهيندڙ اصل خريد ڪندڙ کي وارنٽي ڏئي ٿو ته هي يونٽ اصل خريداري جي تاريخ کان هڪ (1) سال جي عرصي تائين عام استعمال ۽ سار سنڀال جي تحت مواد ۽ ڪم ڪار جي خرابين کان پاڪ آهي.
جيڪڏهن يونٽ هڪ (1) سال جي عرصي اندر ناڪام ٿئي ٿو، ان کي مرمت يا تبديل ڪيو ويندو، ٺاهيندڙ جي اختيار تي، بغير ڪنهن چارج جي، جڏهن خريد جي ثبوت سان سروس سينٽر ڏانهن پري پيڊ واپس ڪيو ويندو. سيلز جي رسيد هن مقصد لاء استعمال ڪري سگهجي ٿي.
تنصيب مزدور هن وارنٽي تحت ڍڪيل نه آهي. سڀئي متبادل حصا، ڇا نوان يا ٻيهر ٺاهيل، فرض ڪن ٿا انهن جي وارنٽي مدت صرف هن وارنٽي جو باقي وقت.
هي وارنٽي غلط استعمال، حادثي، غلط استعمال، غلط حجم جي سبب نقصان تي لاڳو ناهيtagاي، خدمت، باهه، ٻوڏ، بجلي، يا خدا جي ٻين عملن، يا جيڪڏهن پيداوار تبديل ڪئي وئي هئي يا ٺاهيندڙ جي سروس سينٽر کان سواء ڪنهن ٻئي طرفان مرمت ڪئي وئي هئي.
The Manufacturer, under no circumstances shall be liable for any consequential damages for breach of any written warranty of this unit. This warranty gives you specific legal rights, and you may also have rights, which vary from state to state. This manual is copyrighted with all rights reserved. No portion of this document may be copied or reproduced by any means without the express written permission of the Manufacturer. THIS WARRANTY IS NOT TRANSFERABLE.
خدمت لاءِ، UPS ذريعي موڪليو (جيڪڏهن ممڪن هجي) ٺاهيندڙ کي پريپيڊ. خدمت / مرمت لاءِ 3-4 هفتا اجازت ڏيو.

ڪسٽمر سروس
اسان جو ASE تصديق ٿيل ٽيڪنيڪل اسٽاف هتي آهي مدد ڪرڻ لاءِ جيڪڏهن توهان وٽ ڪو سوال آهي يا خدمت جي ضرورت آهي. تازه ڪاري ۽ اختياري رسائي بابت معلومات لاءِ، مهرباني ڪري پنهنجي مقامي اسٽور، ڊسٽريبيوٽر يا انووا جي سروس سينٽر سان رابطو ڪريو.
آمريڪا ۽ ڪئناڊا: 800-544-4124
Monday through Friday: 6:00 AM to 6:00 PM Pacific Time
ٻيا سڀ: 714-241-6802
Monday through Friday: 6:00 AM to 6:00 PM Pacific Time
اي ميل: customercare@innova.com
Web: www.innova.com

انووا اليڪٽرانڪس ڪارپوريشن
17352 وون ڪرمن ايوي.
ارون، CA 92614
ڪاپي رائيٽ © 2025 IEC. سڀ حق محفوظ آهن.
MRP# 97-2195

دستاويز / وسيلا

INNOVA 5110 Check Engine Code Reader [pdf] استعمال ڪندڙ دستياب 5110 Check Engine Code Reader, 5110, Check Engine Code Reader, Engine Code Reader, Code Reader

حوالو

• استعمال ڪندڙ دستي