TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

وضاحتون

• ماڊل: سوال103
• مطابقت: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• رابطي: Bluetooth, 2.4G Wireless, USB (Type-C)
• ڪم ڪرڻ وارو جلدtage: ڊي سي 3.7V
• موجوده ڪم: <30mA
• سمهڻ جي هاڻوڪو: <5uA
• وولٽ چارج ڪرڻtagاي/موجوده: ڊي سي 5V/500mA

مشڪلاتون

• ڪنٽرولر ڳنڍي نه رهيو آهي:
  • پڪ ڪريو ته ڪنٽرولر مڪمل طور تي چارج ٿيل آهي.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • پڪ ڪريو ته توهان جي ڊوائيس تي بلوٽوت فعال آهي.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• جواب نه ڏيڻ وارا بٽڻ:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • ڪنٽرولر کي ڪنهن ٻئي راند يا ايپليڪيشن ۾ آزمايو.
• داخل ٿيڻ جي دير:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • ٻين وائرليس ڊوائيسز کان مداخلت گھٽ ڪريو.
  • Try connecting via USB cable if available.
• ڪنٽرولر چارج نه ٿي رهيو آهي:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • هڪ مختلف قسم-سي ڪيبل يا پاور اڊاپٽر آزمايو.
  • The LED indicator should show the charging status.

Q103 فنڪشنل خاڪو

1. ڊي پيڊ بٽڻ
2. X/Y/A/B بٽڻ
3. HOME Reconnect/Power Button
4. پيئر بٽڻ
5. منتخب ڪريو بٽڻ
6. TURBO بٽڻ
7. کاٻي جوائس اسٽڪ/L3 بٽڻ
8. ساڄي جوائس اسٽڪ / R3 بٽڻ
9. صاف ڪريو بٽڻ
10. START بٽڻ
11. ايل بٽڻ
12. L2 بٽڻ
13. قسم-سي چارجنگ پورٽ
14. R2 بٽڻ
15. آر بٽڻ
16. سوراخ ري سيٽ ڪريو
17. ايل اي ڊي
18. موڊ سوئچ

Android / iOS / Windows/QUBE
اينڊرائيڊ 9.0 / iOS 13.0 / ون 10 ۽ مٿي

Bluetooth ڪنيڪشن

1. سوئچ کي ڦيرايو: X- INPUT موڊ ۾ داخل ٿيڻ لاءِ X ڏانھن سوئچ ڪريو.
2. پهريون استعمال (پاور آن جوڙڻ):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • جڏهن ٻيهر ڪنيڪشن ڪامياب ٿئي ٿي ته LED هميشه ڳاڙهي آهي.
3. ٻيهر استعمال ڪريو (ٻيهر ڪنيڪشن):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. جڏهن ٻيهر ڪنيڪشن ڪامياب ٿئي ٿي ته LED هميشه ڳاڙهي آهي.
4. Press the PAIR button to power off the device.

سوئچ موڊ

Bluetooth ڪنيڪشن

1. سوئچ کي ڦيرايو: سوئچ موڊ ۾ داخل ٿيڻ لاءِ S ڏانهن سوئچ ڪريو.
2. پهريون استعمال (پاور آن جوڙڻ):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED هميشه سائي آهي جڏهن ٻيهر ڪنيڪشن ڪامياب آهي.
3. ٻيهر استعمال ڪريو (ٻيهر ڪنيڪشن):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

شوٽنگ پلس Android لاءِ

Android 9.0 ۽ مٿي

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. پهريون استعمال (پاور آن جوڙڻ):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  ٻيهر استعمال ڪريو (ٻيهر ڪنيڪشن):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. ڊوائيس کي بند ڪرڻ لاء جوڙو بٽڻ کي دٻايو.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

فرم ويئر اپ گريڊ

1. V سان ڳنڍيو file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Joystick سيٽنگون

• Rocker calibration
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

اليڪٽرڪ پيٽرول

• ڪم ڪرڻ وارو جلدtage: DC3.7V
• ڪم ڪندڙ موجوده: <30 ايم اي
• موجوده ننڊ: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• اسٽينڊ بائي وقت: 30 ڏينهن (مڪمل چارج ٿيل)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. سمهڻ / جاڳڻ جو ڪم:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

ايف سي سي ڊيڄاريندڙ

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• وصول ڪندڙ اينٽينا کي ٻيهر ترتيب ڏيو يا منتقل ڪريو.
• سامان ۽ وصول ڪندڙ جي وچ ۾ علحدگي کي وڌايو.
• سامان کي ھڪڙي سرڪٽ تي ھڪڙي آئوٽليٽ ۾ ڳنڍيو جنھن کان رسيور ڳنڍيل آھي.
• مدد لاءِ ڊيلر يا تجربيڪار ريڊيو/ٽي وي ٽيڪنيشن سان صلاح ڪريو.

احتياط: هن ڊوائيس ۾ ڪي به تبديليون يا ترميمون واضح طور تي ٺاهيندڙ طرفان منظور ٿيل نه آهن توهان جي اختيار کي هن سامان کي هلائڻ لاء باطل ڪري سگهي ٿي.
هي ڊوائيس FCC ضابطن جي حصو 15 جي مطابق آهي. آپريشن هيٺ ڏنل ٻن شرطن جي تابع آهي:

1. هي ڊوائيس نقصانڪار مداخلت جو سبب نه ٿي سگھي، ۽
2. هن ڊوائيس کي ڪنهن به مداخلت قبول ڪرڻ گهرجي، جنهن ۾ مداخلت شامل آهي جيڪا ناپسنديده آپريشن سبب ٿي سگهي ٿي.

هي سامان FCC تابڪاري جي نمائش جي حدن جي تعميل ڪري ٿو جيڪو غير ڪنٽرول ٿيل ماحول لاءِ مقرر ڪيو ويو آهي. هي سامان نصب ڪيو وڃي ۽ ريڊيٽر ۽ توهان جي جسم جي وچ ۾ گهٽ ۾ گهٽ 0 سينٽي جي فاصلي سان هلائڻ گهرجي.